IEEE8021-CFM-V2-MIB DEFINITIONS ::= BEGIN -- ****************************************************************** -- IEEE 802.1Q(TM) CFM MIB - V2 -- ****************************************************************** IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] RowStatus, TruthValue, MacAddress FROM SNMPv2-TC -- [RFC2579] MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- [RFC2580] InterfaceIndex FROM IF-MIB -- [RFC2863] IEEE8021ServiceSelectorType, IEEE8021ServiceSelectorValue, IEEE8021ServiceSelectorValueOrNone, IEEE8021PbbComponentIdentifier, ieee802dot1mibs FROM IEEE8021-TC-MIB --cfm types Dot1agCfmMhfCreation, Dot1agCfmIdPermission, Dot1agCfmMDLevel, Dot1agCfmMpDirection, Dot1agCfmMepIdOrZero, Dot1agCfmMDLevelOrNone, Dot1agCfmConfigErrors, -- cfm indexes dot1agCfmMdIndex, dot1agCfmMaIndex, --cfm groups dot1agCfmStack, dot1agCfmDefaultMd, dot1agCfmVlan, dot1agCfmConfigErrorList, dot1agCfmMa, -- cfm row items dot1agCfmMepLbrBadMsdu, dot1agCfmMdRowStatus, dot1agCfmMaNetRowStatus, dot1agCfmMaMepListRowStatus, dot1agCfmMepRowStatus, --cfm conformance groups dot1agCfmCompliances, dot1agCfmGroups, dot1agCfmMdGroup, dot1agCfmMepGroup, dot1agCfmMepDbGroup, dot1agCfmNotificationsGroup, ieee8021CfmDefaultMdDefGroup, ieee8021CfmMaNetGroup, ieee8021CfmPbbTeExtensionGroup, ieee8021CfmPbbTeTrafficBitGroup FROM IEEE8021-CFM-MIB ; ieee8021CfmV2Mib MODULE-IDENTITY LAST-UPDATED "201412150000Z" -- December 15, 2014 ORGANIZATION "IEEE 802.1 Working Group" CONTACT-INFO "WG-URL: http://grouper.ieee.org/groups/802/1/index.html WG-EMail: stds-802-1@ieee.org Contact: IEEE 802.1 Working Group Chair Postal: C/O IEEE 802.1 Working Group IEEE Standards Association 445 Hoes Lane P.O. Box 1331 Piscataway NJ 08855-1331 USA E-mail: STDS-802-1-L@LISTSERV.IEEE.ORG " DESCRIPTION "Connectivity Fault Management V2 module. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2014. Copyright (C) IEEE (2014). This version of this MIB module is part of IEEE Std 802.1Q; see the draft itself for full legal notices." REVISION "201412150000Z" -- December 15, 2014 DESCRIPTION "Published as part of IEEE Std 802.1Q 2014 revision. Cross references updated and corrected." REVISION "201102270000Z" -- February 27, 20110 DESCRIPTION "Minor edits to contact information etc. as part of 2011 revision of IEEE Std 802.1Q." REVISION "200811180000Z" -- November 18,2008 DESCRIPTION "Added a new compliance clause for utilization by systems that support CFM and PBB-TE." REVISION "200810150000Z" -- October 15, 2008 DESCRIPTION "The IEEE8021-CFM-V2-MIB Module contains objects that replace those deprecated in the IEEE8021-CFM-MIB module. This version is included in IEEE 802.1ap" ::= { ieee802dot1mibs 7 } -- ****************************************************************** -- Note: Re-indexed 802.1ag tables -- ****************************************************************** -- This section contains new tables replacing deprecated tables in -- this version of the MIB -- ****************************************************************** -- The CFM Stack Table -- ****************************************************************** ieee8021CfmStackTable OBJECT-TYPE SYNTAX SEQUENCE OF Ieee8021CfmStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is one CFM Stack table per Bridge. It permits the retrieval of information about the Maintenance Points configured on any given interface. " REFERENCE "12.14.2" ::= { dot1agCfmStack 2 } ieee8021CfmStackEntry OBJECT-TYPE SYNTAX Ieee8021CfmStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Stack table entry" INDEX { ieee8021CfmStackifIndex, ieee8021CfmStackServiceSelectorType, ieee8021CfmStackServiceSelectorOrNone, ieee8021CfmStackMdLevel, ieee8021CfmStackDirection } ::= { ieee8021CfmStackTable 1 } Ieee8021CfmStackEntry ::= SEQUENCE { ieee8021CfmStackifIndex InterfaceIndex, ieee8021CfmStackServiceSelectorType IEEE8021ServiceSelectorType, ieee8021CfmStackServiceSelectorOrNone IEEE8021ServiceSelectorValueOrNone, ieee8021CfmStackMdLevel Dot1agCfmMDLevel, ieee8021CfmStackDirection Dot1agCfmMpDirection, ieee8021CfmStackMdIndex Unsigned32, ieee8021CfmStackMaIndex Unsigned32, ieee8021CfmStackMepId Dot1agCfmMepIdOrZero, ieee8021CfmStackMacAddress MacAddress } ieee8021CfmStackifIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the Bridge Port or aggregated port on which MEPs or MHFs might be configured. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable, and rearrange the ieee8021CfmStackTable, so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL delete all entries in the ieee8021CfmStackTable with the interface index. " REFERENCE "12.14.2.1.2:a" ::= { ieee8021CfmStackEntry 1 } ieee8021CfmStackServiceSelectorType OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of the Service Selector identifier indicated by ieee8021CfmStackServiceSelectorOrNone. See textual convention IEEE8021ServiceSelectorType for details. " REFERENCE "12.14.2.1.2:d, 22.1.7" ::= { ieee8021CfmStackEntry 2 } ieee8021CfmStackServiceSelectorOrNone OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorValueOrNone MAX-ACCESS not-accessible STATUS current DESCRIPTION "Service Selector identifier to which the MP is attached, or 0, if none. See textual convention IEEE8021ServiceSelectorValue for details. " REFERENCE "12.14.2.1.2:d, 22.1.7" ::= { ieee8021CfmStackEntry 3 } ieee8021CfmStackMdLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevel MAX-ACCESS not-accessible STATUS current DESCRIPTION "MD Level of the Maintenance Point." REFERENCE "12.14.2.1.2:b" ::= { ieee8021CfmStackEntry 4 } ieee8021CfmStackDirection OBJECT-TYPE SYNTAX Dot1agCfmMpDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction in which the MP faces on the Bridge Port" REFERENCE "12.14.2.1.2:c" ::= { ieee8021CfmStackEntry 5 } ieee8021CfmStackMdIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the Maintenance Domain in the ieee8021CfmMdTable to which the MP is associated, or 0, if none." REFERENCE "12.14.2.1.3:b" ::= { ieee8021CfmStackEntry 6 } ieee8021CfmStackMaIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the MA in the dot1agCfmMaNetTable and ieee8021CfmMaCompTable to which the MP is associated, or 0, if none." REFERENCE "12.14.2.1.3:c" ::= { ieee8021CfmStackEntry 7 } ieee8021CfmStackMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "If an MEP is configured, the MEPID, else 0" REFERENCE "12.14.2.1.3:d" ::= { ieee8021CfmStackEntry 8 } ieee8021CfmStackMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the MP." REFERENCE "12.14.2.1.3:e" ::= { ieee8021CfmStackEntry 9 } -- ****************************************************************** -- The CFM VLAN Table -- ****************************************************************** ieee8021CfmVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF Ieee8021CfmVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the association of VIDs into VLANs. There is an entry in this table, for each component of the Bridge, for each VID that is: a) a VID belonging to a VLAN associated with more than one VID; and b) not the Primary VID of that VLAN. The entry in this table contains the Primary VID of the VLAN. By default, this table is empty, meaning that every VID is the Primary VID of a single-VID VLAN. VLANs that are associated with only one VID SHOULD NOT have an entry in this table. The writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "12.14.3.1.3:a, 12.14.3.2.2:a, 12.14.5.3.2:c, 12.14.6.1.3:b, 22.1.5" ::= { dot1agCfmVlan 2 } ieee8021CfmVlanEntry OBJECT-TYPE SYNTAX Ieee8021CfmVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN table entry." INDEX { ieee8021CfmVlanComponentId, ieee8021CfmVlanSelector} ::= { ieee8021CfmVlanTable 1 } Ieee8021CfmVlanEntry ::= SEQUENCE { ieee8021CfmVlanComponentId IEEE8021PbbComponentIdentifier, ieee8021CfmVlanSelector IEEE8021ServiceSelectorValue, ieee8021CfmVlanPrimarySelector IEEE8021ServiceSelectorValue, ieee8021CfmVlanRowStatus RowStatus } ieee8021CfmVlanComponentId OBJECT-TYPE SYNTAX IEEE8021PbbComponentIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Bridge component within the system to which the information in this ieee8021CfmVlanEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. " REFERENCE "12.3 l)" ::= { ieee8021CfmVlanEntry 1 } ieee8021CfmVlanSelector OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a service ID belonging to a service that is associated with more than one Service Selector identifiers, and this is not the Primary Service ID of the service. The type of this Service Selector is the same as the primary Service Selector's type defined by ieee8021CfmMaCompPrimarySelectorType in the ieee8021CfmMaCompTable. " ::= { ieee8021CfmVlanEntry 3 } ieee8021CfmVlanPrimarySelector OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorValue MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Primary Service selector for a Service that is associated with more than one Service Selector identifiers. This value MUST not equal the value of ieee8021CfmVlanSelector. The type of this Service Selector is the same as the primary Service Selector's type defined by ieee8021CfmMaCompPrimarySelectorType in the ieee8021CfmMaCompTable. " ::= { ieee8021CfmVlanEntry 5 } ieee8021CfmVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. " ::= { ieee8021CfmVlanEntry 6 } -- ******************************************************************* -- The CFM Default MD Level Table -- ******************************************************************* ieee8021CfmDefaultMdTable OBJECT-TYPE SYNTAX SEQUENCE OF Ieee8021CfmDefaultMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each Bridge component, the Default MD Level Managed Object controls MHF creation for VIDs that are not attached to a specific Maintenance Association Managed Object, and Sender ID TLV transmission by those MHFs. For each Bridge Port, and for each VLAN ID whose data can pass through that Bridge Port, an entry in this table is used by the algorithm in 22.2.3 only if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as this table's entry, and on which MA an Up MEP is defined. If there exists such an MA, that MA's objects are used by the algorithm in 22.2.3 in place of this table entry's objects. The agent maintains the value of ieee8021CfmDefaultMdStatus to indicate whether this entry is overridden by an MA. When first initialized, the agent creates this table automatically with entries for all VLAN IDs, with the default values specified for each object. After this initialization, the writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "12.14.3" ::= { dot1agCfmDefaultMd 5 } ieee8021CfmDefaultMdEntry OBJECT-TYPE SYNTAX Ieee8021CfmDefaultMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Default MD Level table entry." INDEX { ieee8021CfmDefaultMdComponentId, ieee8021CfmDefaultMdPrimarySelectorType, ieee8021CfmDefaultMdPrimarySelector} ::= { ieee8021CfmDefaultMdTable 1 } Ieee8021CfmDefaultMdEntry ::= SEQUENCE { ieee8021CfmDefaultMdComponentId IEEE8021PbbComponentIdentifier, ieee8021CfmDefaultMdPrimarySelectorType IEEE8021ServiceSelectorType, ieee8021CfmDefaultMdPrimarySelector IEEE8021ServiceSelectorValue, ieee8021CfmDefaultMdStatus TruthValue, ieee8021CfmDefaultMdLevel Dot1agCfmMDLevelOrNone, ieee8021CfmDefaultMdMhfCreation Dot1agCfmMhfCreation, ieee8021CfmDefaultMdIdPermission Dot1agCfmIdPermission } ieee8021CfmDefaultMdComponentId OBJECT-TYPE SYNTAX IEEE8021PbbComponentIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Bridge component within the system to which the information in this ieee8021CfmDefaultMdEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. " REFERENCE "12.3 l)" ::= { ieee8021CfmDefaultMdEntry 1 } ieee8021CfmDefaultMdPrimarySelectorType OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of the Primary Service Selector identifier indicated by ieee8021CfmDefaultMdPrimarySelector. See textual convention IEEE8021ServiceSelectorType for details. " ::= { ieee8021CfmDefaultMdEntry 2 } ieee8021CfmDefaultMdPrimarySelector OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "Primary Service Selector identifier of a Service Instance with no MA configured. See IEEE8021ServiceSelectorValue for details. " ::= { ieee8021CfmDefaultMdEntry 3 } ieee8021CfmDefaultMdStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "State of this Default MD Level table entry. True if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as this table's entry, and on which MA an Up MEP is defined, else false. " REFERENCE "12.14.3.1.3:b" ::= { ieee8021CfmDefaultMdEntry 4 } ieee8021CfmDefaultMdLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevelOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for the VLAN to which this entry's objects apply. " REFERENCE "12.14.3.1.3:c, 12.14.3.2.2:b" DEFVAL {-1} ::= { ieee8021CfmDefaultMdEntry 5 } ieee8021CfmDefaultMdMhfCreation OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation MAX-ACCESS read-write STATUS current DESCRIPTION "A value indicating if the Management entity can create MHFs (MIP Half Function) for this VID at this MD Level. If this object has the value defMHFdefer, MHF creation for this VLAN is controlled by ieee8021CfmDefaultMdDefMhfCreation. The value of this variable is meaningless if the values of ieee8021CfmDefaultMdStatus is false. " REFERENCE "12.14.3.1.3:d" DEFVAL {defMHFdefer} ::= { ieee8021CfmDefaultMdEntry 6 } ieee8021CfmDefaultMdIdPermission OBJECT-TYPE SYNTAX Dot1agCfmIdPermission MAX-ACCESS read-write STATUS current DESCRIPTION "Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain. If this object has the value sendIdDefer, Sender ID TLV transmission for this VLAN is controlled by ieee8021CfmDefaultMdDefIdPermission. The value of this variable is meaningless if the values of ieee8021CfmDefaultMdStatus is false. " REFERENCE "12.14.3.1.3:e" DEFVAL { sendIdDefer } ::= { ieee8021CfmDefaultMdEntry 7 } -- ****************************************************************** -- The CFM Configuration Error List Table -- ****************************************************************** ieee8021CfmConfigErrorListTable OBJECT-TYPE SYNTAX SEQUENCE OF Ieee8021CfmConfigErrorListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The CFM Configuration Error List table provides a list of Interfaces and VIDs that are incorrectly configured. " REFERENCE "12.14.4" ::= {dot1agCfmConfigErrorList 2} ieee8021CfmConfigErrorListEntry OBJECT-TYPE SYNTAX Ieee8021CfmConfigErrorListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Config Error List Table entry" INDEX { ieee8021CfmConfigErrorListSelectorType, ieee8021CfmConfigErrorListSelector, ieee8021CfmConfigErrorListIfIndex } ::= { ieee8021CfmConfigErrorListTable 1} Ieee8021CfmConfigErrorListEntry ::= SEQUENCE { ieee8021CfmConfigErrorListSelectorType IEEE8021ServiceSelectorType, ieee8021CfmConfigErrorListSelector IEEE8021ServiceSelectorValue, ieee8021CfmConfigErrorListIfIndex InterfaceIndex, ieee8021CfmConfigErrorListErrorType Dot1agCfmConfigErrors } ieee8021CfmConfigErrorListSelectorType OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of the Service Selector identifier indicated by ieee8021CfmConfigErrorListSelector. See textual convention IEEE8021ServiceSelectorType for details. " REFERENCE "12.14.4.1.2:a" ::= { ieee8021CfmConfigErrorListEntry 1 } ieee8021CfmConfigErrorListSelector OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Service Selector Identifier of the Service with interfaces in error. See IEEE8021ServiceSelectorValue for details. " REFERENCE "12.14.4.1.2:a" ::= { ieee8021CfmConfigErrorListEntry 2 } ieee8021CfmConfigErrorListIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is the IfIndex of the interface. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL delete any entries in ieee8021CfmConfigErrorListTable indexed by that InterfaceIndex value. " REFERENCE "12.14.4.1.2:b" ::= { ieee8021CfmConfigErrorListEntry 3 } ieee8021CfmConfigErrorListErrorType OBJECT-TYPE SYNTAX Dot1agCfmConfigErrors MAX-ACCESS read-only STATUS current DESCRIPTION "A vector of Boolean error conditions from 22.2.4, any of which may be true: 0) CFMleak; 1) ConflictingVids; 2) ExcessiveLevels; 3) OverlappedLevels. " REFERENCE "12.14.4.1.3:b" ::= { ieee8021CfmConfigErrorListEntry 4 } -- ****************************************************************** -- The CFM Maintenance Association (MA) Component Table -- ****************************************************************** ieee8021CfmMaCompTable OBJECT-TYPE SYNTAX SEQUENCE OF Ieee8021CfmMaCompEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the part of the complete MA table that is variable across the Bridges in a Maintenance Domain, or across the components of a single Bridge. That part of the MA table that is constant across the Bridges and their components in a Maintenance Domain is contained in the dot1agCfmMaNetTable. This table uses three indices, first index is the IEEE8021PbbComponentIdentifier that identifies the component within the Bridge for which the information in the ieee8021CfmMaCompEntry applies. The second is the index of the Maintenance Domain table. The third index is the same as the index of the ieee8021CfmMaNetEntry for the same MA. The writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "18.2" ::= { dot1agCfmMa 4 } ieee8021CfmMaCompEntry OBJECT-TYPE SYNTAX Ieee8021CfmMaCompEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MA table entry." INDEX {ieee8021CfmMaComponentId, dot1agCfmMdIndex, dot1agCfmMaIndex } ::= { ieee8021CfmMaCompTable 1 } Ieee8021CfmMaCompEntry ::= SEQUENCE { ieee8021CfmMaComponentId IEEE8021PbbComponentIdentifier, ieee8021CfmMaCompPrimarySelectorType IEEE8021ServiceSelectorType, ieee8021CfmMaCompPrimarySelectorOrNone IEEE8021ServiceSelectorValueOrNone, ieee8021CfmMaCompMhfCreation Dot1agCfmMhfCreation, ieee8021CfmMaCompIdPermission Dot1agCfmIdPermission, ieee8021CfmMaCompNumberOfVids Unsigned32, ieee8021CfmMaCompRowStatus RowStatus } ieee8021CfmMaComponentId OBJECT-TYPE SYNTAX IEEE8021PbbComponentIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Bridge component within the system to which the information in this ieee8021CfmMaCompEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. " REFERENCE "12.3 l)" ::= { ieee8021CfmMaCompEntry 1 } ieee8021CfmMaCompPrimarySelectorType OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorType MAX-ACCESS read-create STATUS current DESCRIPTION "Type of the Service Selector identifiers indicated by ieee8021CfmMaCompPrimarySelectorOrNone. If the service instance is defined by more than one Service Selector, this parameter also indicates the type of the ieee8021CfmVlanPrimarySelector and ieee8021CfmVlanSelector in the ieee8021CfmVlanTable. In Services instances made of multiple Service Selector identifiers, ensures that the type of the Service selector identifiers is the same. See textual convention IEEE8021ServiceSelectorType for details. " REFERENCE "12.14.6.1.3:b" ::= { ieee8021CfmMaCompEntry 2 } ieee8021CfmMaCompPrimarySelectorOrNone OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorValueOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "Service Selector identifier to which the MP is attached, or 0, if none. If the MA is associated with more than one Service Selectors Identifiers, the ieee8021CfmVlanTable lists them. " REFERENCE "12.14.6.1.3:b" ::= { ieee8021CfmMaCompEntry 3 } ieee8021CfmMaCompMhfCreation OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates if the Management entity can create MHFs (MIP Half Function) for this MA. " REFERENCE "12.14.6.1.3:c" DEFVAL { defMHFdefer } ::= { ieee8021CfmMaCompEntry 4 } ieee8021CfmMaCompIdPermission OBJECT-TYPE SYNTAX Dot1agCfmIdPermission MAX-ACCESS read-create STATUS current DESCRIPTION "Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this MA. " REFERENCE "12.14.6.1.3:d" DEFVAL { sendIdDefer } ::= { ieee8021CfmMaCompEntry 5 } ieee8021CfmMaCompNumberOfVids OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of VIDs associated with the MA. " REFERENCE "12.14.6.1.3:b" ::= { ieee8021CfmMaCompEntry 6 } ieee8021CfmMaCompRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. " ::= { ieee8021CfmMaCompEntry 7 } -- ****************************************************************** -- Units of conformance -- ****************************************************************** ieee8021CfmStackGroup OBJECT-GROUP OBJECTS { ieee8021CfmStackMdIndex, ieee8021CfmStackMaIndex, ieee8021CfmStackMepId, ieee8021CfmStackMacAddress } STATUS current DESCRIPTION "Objects for the Stack group." ::= { dot1agCfmGroups 12 } ieee8021CfmMaGroup OBJECT-GROUP OBJECTS { ieee8021CfmMaCompPrimarySelectorType, ieee8021CfmMaCompPrimarySelectorOrNone, ieee8021CfmMaCompMhfCreation, ieee8021CfmMaCompIdPermission, ieee8021CfmMaCompRowStatus, ieee8021CfmMaCompNumberOfVids } STATUS current DESCRIPTION "Objects for the MA group." ::= { dot1agCfmGroups 13 } ieee8021CfmDefaultMdGroup OBJECT-GROUP OBJECTS { ieee8021CfmDefaultMdStatus, ieee8021CfmDefaultMdLevel, ieee8021CfmDefaultMdMhfCreation, ieee8021CfmDefaultMdIdPermission } STATUS current DESCRIPTION "Objects for the Default MD Level group." ::= { dot1agCfmGroups 14 } ieee8021CfmVlanIdGroup OBJECT-GROUP OBJECTS { ieee8021CfmVlanPrimarySelector, ieee8021CfmVlanRowStatus } STATUS current DESCRIPTION "Objects for the VLAN ID group." ::= { dot1agCfmGroups 15 } ieee8021CfmConfigErrorListGroup OBJECT-GROUP OBJECTS { ieee8021CfmConfigErrorListErrorType } STATUS current DESCRIPTION "Objects for the CFM Configuration Error List Group." ::= {dot1agCfmGroups 16 } -- ****************************************************************** -- MIB Module Compliance statements -- ****************************************************************** ieee8021CfmComplianceV2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for support of the CFM MIB module." MODULE MANDATORY-GROUPS { ieee8021CfmStackGroup, ieee8021CfmMaGroup, ieee8021CfmDefaultMdGroup, ieee8021CfmConfigErrorListGroup } GROUP ieee8021CfmVlanIdGroup DESCRIPTION "The VLAN ID group is optional." OBJECT ieee8021CfmMaCompRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT ieee8021CfmVlanRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." MODULE IEEE8021-CFM-MIB MANDATORY-GROUPS { dot1agCfmMdGroup, dot1agCfmMepGroup, dot1agCfmMepDbGroup, dot1agCfmNotificationsGroup, ieee8021CfmDefaultMdDefGroup, ieee8021CfmMaNetGroup } OBJECT dot1agCfmMepLbrBadMsdu MIN-ACCESS not-accessible DESCRIPTION "The dot1agCfmMepLbrBadMsdu variable is optional. It MUST not be present if the system cannot compare a received LBR to the corresponding LBM." OBJECT dot1agCfmMdRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT dot1agCfmMaNetRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT dot1agCfmMaMepListRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT dot1agCfmMepRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." ::= { dot1agCfmCompliances 2 } dot1agCfmWithPbbTeCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for support of the CFM MIB for systems that support PBB-TE." MODULE MANDATORY-GROUPS { ieee8021CfmStackGroup, ieee8021CfmMaGroup, ieee8021CfmDefaultMdGroup, ieee8021CfmConfigErrorListGroup } GROUP ieee8021CfmVlanIdGroup DESCRIPTION "The VLAN ID group is optional." OBJECT ieee8021CfmMaCompRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT ieee8021CfmVlanRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." MODULE IEEE8021-CFM-MIB MANDATORY-GROUPS { dot1agCfmMdGroup, dot1agCfmMepGroup, dot1agCfmMepDbGroup, dot1agCfmNotificationsGroup, ieee8021CfmDefaultMdDefGroup, ieee8021CfmMaNetGroup, ieee8021CfmPbbTeExtensionGroup } GROUP ieee8021CfmPbbTeTrafficBitGroup DESCRIPTION "The objects needed to support the traffic bit are optional as traffic bit support, itself, is optional." OBJECT dot1agCfmMepLbrBadMsdu MIN-ACCESS not-accessible DESCRIPTION "The dot1agCfmMepLbrBadMsdu variable is optional. It MUST not be present if the system cannot compare a received LBR to the corresponding LBM." OBJECT dot1agCfmMdRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT dot1agCfmMaNetRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT dot1agCfmMaMepListRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT dot1agCfmMepRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." ::= { dot1agCfmCompliances 3 } END