IEEE8021-TEIPS-V2-MIB DEFINITIONS ::= BEGIN -- ============================================================= -- MIB for IEEE 802.1Q TEIPS Devices -- ============================================================= IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI RowStatus, StorageType, TruthValue FROM SNMPv2-TC ieee802dot1mibs, IEEE8021BridgePortNumber, IEEE8021TeipsIpgConfigActiveRequests, IEEE8021TeipsIpgid, IEEE8021TeipsIpgConfigAdmin, IEEE8021PbbTeTSidId FROM IEEE8021-TC-MIB ieee8021BridgeBaseComponentId FROM IEEE8021-BRIDGE-MIB MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF; ieee8021TeipsV2Mib MODULE-IDENTITY LAST-UPDATED "201806280000Z" -- June 28, 2018 ORGANIZATION "IEEE 802.1 Working Group" CONTACT-INFO "WG-URL: http://www.ieee802.org/1/ WG-EMail: stds-802-1-L@ieee.org Contact: IEEE 802.1 Working Group Chair Postal: IEEE Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA E-mail: stds-802-1-L@ieee.org " DESCRIPTION "MIB Module for managing systems that provide Provider Backbone Bridge Traffic Engineering (PBB-TE) Infrastructure Segment Protection. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q. Copyright (C) IEEE (2018). All Rights Reserved This MIB module is part of IEEE 802.1Q; See the IEEE 802.1Q standard for full legal notices. " REVISION "201806280000Z" -- June 28, 2018 DESCRIPTION "Published as part of IEEE Std 802.1Q-2018. Cross references updated and corrected. Description added." REVISION "201412150000Z" -- December 15, 2014 DESCRIPTION "Published as part of IEEE Std 802.1Q 2014 revision. Cross references updated and corrected. Module and object names changed to V2 and base arc changed from 24 to 27 to remove conflicting OID allocation (see comments below). The old version of this MIB, and its object names, SHOULD NOT BE USED." REVISION "201108170000Z" -- (YYYYMMDDHHMM Zulu=GMT) DESCRIPTION "Version 1 of the TEIPS MIB module based upon IEEE 802.1Qbf" ::= { iso(1) org(3) ieee(111) standards-association-numbers-series-standards (2) lan-man-stds (802) ieee802dot1 (1) ieee802dot1mibs (1) 27 } -- -- An earlier version of this MIB was -- inadvertently published under the wrong root arc: -- { iso(1) org(3) ieee(111) -- standards-association-numbers-series-standards (2) -- lan-man-stds (802) ieee802dot1 (1) ieee802dot1mibs (1) 24 } -- That version of the MIB, and its object names, SHOULD NOT BE USED. -- ieee8021TeipsV2Notifications OBJECT IDENTIFIER ::= { ieee8021TeipsV2Mib 0 } ieee8021TeipsV2Objects OBJECT IDENTIFIER ::= { ieee8021TeipsV2Mib 1 } ieee8021TeipsV2Conformance OBJECT IDENTIFIER ::= { ieee8021TeipsV2Mib 2 } -- --TEIPS MIB Objects -- -- ============================================================= -- the ieee8021TeipsV2IpgTable -- ============================================================= ieee8021TeipsV2IpgTable OBJECT-TYPE SYNTAX SEQUENCE OF Ieee8021TeipsV2IpgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPG table. Each entry in this table corresponds to an Infrastructure Protection Group (IPG) associated with a PBB supporting Infrastructure Protection Switching (IPS)." REFERENCE "12.24.1" ::= { ieee8021TeipsV2Objects 1 } ieee8021TeipsV2IpgEntry OBJECT-TYPE SYNTAX Ieee8021TeipsV2IpgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPG table entry." INDEX {ieee8021BridgeBaseComponentId, ieee8021TeipsV2Ipgid } ::= { ieee8021TeipsV2IpgTable 1 } Ieee8021TeipsV2IpgEntry ::= SEQUENCE { ieee8021TeipsV2Ipgid IEEE8021TeipsIpgid, ieee8021TeipsV2IpgWorkingMA Unsigned32, ieee8021TeipsV2IpgProtectionMA Unsigned32, ieee8021TeipsV2IpgWorkingPortNumber IEEE8021BridgePortNumber, ieee8021TeipsV2IpgProtectionPortNumber IEEE8021BridgePortNumber, ieee8021TeipsV2IpgStorageType StorageType, ieee8021TeipsV2IpgRowStatus RowStatus } ieee8021TeipsV2Ipgid OBJECT-TYPE SYNTAX IEEE8021TeipsIpgid MAX-ACCESS not-accessible STATUS current DESCRIPTION "Uniquely identifies an IPG within the PBB." REFERENCE "12.24.1.1.3 a" ::= { ieee8021TeipsV2IpgEntry 1 } ieee8021TeipsV2IpgWorkingMA OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Identifies the Segment MA that corresponds to the IPG's working entity. The MA index in this column must hold a value that is the value of dot1agCfmStackMaIndex column for some entry in the dot1agCfmStackTable before the RowStatus for this row can be set to Active. Furthermore, this column may not be modified when the RowStatus for this row is Active." REFERENCE "12.24.1.1.3 b)" ::= { ieee8021TeipsV2IpgEntry 2 } ieee8021TeipsV2IpgProtectionMA OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Identifies the Segment MA that corresponds to the IPG's protection entity. The MA index in this column must hold a value that is the value of dot1agCfmStackMaIndex column for some entry in the dot1agCfmStackTable before the RowStatus for this row can be set to Active. Furthermore, this column may not be modified when the RowStatus for this row is Active." REFERENCE "12.24.1.1.3 c)" ::= { ieee8021TeipsV2IpgEntry 3 } ieee8021TeipsV2IpgWorkingPortNumber OBJECT-TYPE SYNTAX IEEE8021BridgePortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the local Port associated with the IPG Working Segment." REFERENCE "12.24.1.1.3 b)" ::= { ieee8021TeipsV2IpgEntry 4 } ieee8021TeipsV2IpgProtectionPortNumber OBJECT-TYPE SYNTAX IEEE8021BridgePortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the local Port associated with the IPG Protection Segment." REFERENCE "12.24.1.1.3 c)" ::= { ieee8021TeipsV2IpgEntry 5 } ieee8021TeipsV2IpgStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the persistence of this entry. All read-create columns must be writable if this column is set to permanent." DEFVAL { nonVolatile } ::= { ieee8021TeipsV2IpgEntry 6 } ieee8021TeipsV2IpgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. The writable columns in a row cannot be changed if the row is active. The TeipsIpgWorkingMA and TeipsIpgProtectionMA columns must be specified before the row can be activated." REFERENCE "12.24.1.2" ::= { ieee8021TeipsV2IpgEntry 7 } -- ============================================================= -- the ieee8021TeipsV2TesiTable -- ============================================================= ieee8021TeipsV2TesiTable OBJECT-TYPE SYNTAX SEQUENCE OF Ieee8021TeipsV2TesiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPG TE-SID table contains identifies the TE service instances associated with an IPG." REFERENCE "12.24.2.1.3 e)" ::= { ieee8021TeipsV2Objects 2 } ieee8021TeipsV2TesiEntry OBJECT-TYPE SYNTAX Ieee8021TeipsV2TesiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TE-IPS TESI entry. Each entry identifies a TESI associated with an IPG." INDEX { ieee8021TeipsV2Ipgid, ieee8021TeipsV2TesiIndex } ::= { ieee8021TeipsV2TesiTable 1 } Ieee8021TeipsV2TesiEntry ::= SEQUENCE { ieee8021TeipsV2TesiIndex Unsigned32, ieee8021TeipsV2TesiId IEEE8021PbbTeTSidId, ieee8021TeipsV2TesiStorageType StorageType, ieee8021TeipsV2TesiRowStatus RowStatus } ieee8021TeipsV2TesiIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an identifier, of local signifigance to a particular PBB-TE TE-SID associated with an IPG." REFERENCE "12.24.2.1.3 e" ::= { ieee8021TeipsV2TesiEntry 1 } ieee8021TeipsV2TesiId OBJECT-TYPE SYNTAX IEEE8021PbbTeTSidId MAX-ACCESS read-create STATUS current DESCRIPTION "This column holds the TESI identifier corresponding to a TE service instance associated with an IPG." REFERENCE "12.24.2.1.3 e" ::= { ieee8021TeipsV2TesiEntry 2 } ieee8021TeipsV2TesiStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the persistence of this entry. All read-create columns must be writable for permanent rows." DEFVAL { nonVolatile } ::= { ieee8021TeipsV2TesiEntry 3 } ieee8021TeipsV2TesiRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This column holds the status for this row. When the status is active, no columns of this table may be modified. All columns must have a valid value before the row can be activated." ::= { ieee8021TeipsV2TesiEntry 4 } -- ============================================================= -- the ieee8021TeipsV2CandidatePsTable -- ============================================================= ieee8021TeipsV2CandidatePsTable OBJECT-TYPE SYNTAX SEQUENCE OF Ieee8021TeipsV2CandidatePsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Candidate PS table lists, in priority order, from highest priority to lowest priority, the Maintenance Associations corresponding to candidate Protection Segments associated with an IPG." REFERENCE "12.24.2.1.3 d)" ::= { ieee8021TeipsV2Objects 3 } ieee8021TeipsV2CandidatePsEntry OBJECT-TYPE SYNTAX Ieee8021TeipsV2CandidatePsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Candidate PS entry. Each entry identifies a candidate Protection Segment associated with an IPG." INDEX { ieee8021TeipsV2Ipgid, ieee8021TeipsV2CandidatePsIndex } ::= { ieee8021TeipsV2CandidatePsTable 1 } Ieee8021TeipsV2CandidatePsEntry ::= SEQUENCE { ieee8021TeipsV2CandidatePsIndex Unsigned32, ieee8021TeipsV2CandidatePsMA Unsigned32, ieee8021TeipsV2CandidatePsPort IEEE8021BridgePortNumber, ieee8021TeipsV2CandidatePsOper TruthValue, ieee8021TeipsV2CandidatePsStorageType StorageType, ieee8021TeipsV2CandidatePsRowStatus RowStatus } ieee8021TeipsV2CandidatePsIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an identifier, of local signifigance to a particular candidate Protection Segment associated with an IPG." REFERENCE "12.24.2.1.3 d)" ::= { ieee8021TeipsV2CandidatePsEntry 1 } ieee8021TeipsV2CandidatePsMA OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This column holds the candidate Protection Segment MA corresponding to a candidate Protection Segment associated with an IPG." REFERENCE "12.24.2.1.3 d)" ::= { ieee8021TeipsV2CandidatePsEntry 2 } ieee8021TeipsV2CandidatePsPort OBJECT-TYPE SYNTAX IEEE8021BridgePortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "This column holds the Port Number corresponding to the candidate Protection Segment associated with an IPG." REFERENCE "12.24.2.1.3 d)" ::= { ieee8021TeipsV2CandidatePsEntry 3 } ieee8021TeipsV2CandidatePsOper OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This column indicates whether or not the candidate Protection Segment is operational." REFERENCE "12.24.2.1.3 d)" ::= { ieee8021TeipsV2CandidatePsEntry 4 } ieee8021TeipsV2CandidatePsStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the persistence of this entry. All read-create columns must be writable for permanent rows." DEFVAL { nonVolatile } ::= { ieee8021TeipsV2CandidatePsEntry 5 } ieee8021TeipsV2CandidatePsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This column holds the status for this row. When the status is active, no columns of this table may be modified. All columns must have a valid value before the row can be activated." ::= { ieee8021TeipsV2CandidatePsEntry 6 } -- ============================================================= -- the ieee8021TeipsV2IpgConfigTable -- ============================================================= ieee8021TeipsV2IpgConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Ieee8021TeipsV2IpgConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PBB-TE IPS IPG config table contains configuration and status information for each IPG configured in the system. Entries in this table are created implicitly by the creation of entries in the ieee8021TeipsV2IpgTable." REFERENCE "12.24.2.1.3 f,g,h,i,j,k)" ::= { ieee8021TeipsV2Objects 4 } ieee8021TeipsV2IpgConfigEntry OBJECT-TYPE SYNTAX Ieee8021TeipsV2IpgConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPG confguration table entry. Rows are created in this table implicitly when a row is added to the ieee8021TeipsV2IpgTable." INDEX { ieee8021BridgeBaseComponentId, ieee8021TeipsV2Ipgid } ::= { ieee8021TeipsV2IpgConfigTable 1 } Ieee8021TeipsV2IpgConfigEntry ::= SEQUENCE { ieee8021TeipsV2IpgConfigState INTEGER, ieee8021TeipsV2IpgConfigCommandStatus IEEE8021TeipsIpgConfigAdmin, ieee8021TeipsV2IpgConfigCommandLast IEEE8021TeipsIpgConfigAdmin, ieee8021TeipsV2IpgConfigCommandAdmin IEEE8021TeipsIpgConfigAdmin, ieee8021TeipsV2IpgConfigActiveRequests IEEE8021TeipsIpgConfigActiveRequests, ieee8021TeipsV2IpgConfigWTR Unsigned32, ieee8021TeipsV2IpgConfigHoldOff Unsigned32, ieee8021TeipsV2IpgM1ConfigState INTEGER, ieee8021TeipsV2IpgConfigMWTR Unsigned32, ieee8021TeipsV2IpgConfigNotifyEnable TruthValue, ieee8021TeipsV2IpgConfigStorageType StorageType } ieee8021TeipsV2IpgConfigState OBJECT-TYPE SYNTAX INTEGER { workingSegment(1), protectionSegment(2), waitToRestore(3), protAdmin(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This column indicates the current state of the protection switching state machine for an IPG. The value can be one of the following: workingSegment(1) The protection switching state machine is in the WORKING_PATH state. protectionSegment(2) The protection switching state machine is in the PROTECTION_PATH state. waitToRestore(3) The protection switching state machine is in the WTR state. protAdmin(4) The protection switching state machine is in the PROT_ADMIN state." REFERENCE "12.24.2.1.3 f)" ::= { ieee8021TeipsV2IpgConfigEntry 1 } ieee8021TeipsV2IpgConfigCommandStatus OBJECT-TYPE SYNTAX IEEE8021TeipsIpgConfigAdmin MAX-ACCESS read-only STATUS current DESCRIPTION "This column indicates the status of administrative commands within the protection group. It reflects the current operational administrative command being acted upon by the IPG." REFERENCE "12.24.2.1.3 f)" ::= { ieee8021TeipsV2IpgConfigEntry 2 } ieee8021TeipsV2IpgConfigCommandLast OBJECT-TYPE SYNTAX IEEE8021TeipsIpgConfigAdmin MAX-ACCESS read-only STATUS current DESCRIPTION "This column indicates the last attempted administrative command applied to the IPG. It is changed whenever a write is made to the CommandAdmin column of this table and is essentially record of the last attempted administrative operation." REFERENCE "12.24.2.1.3 f)" ::= { ieee8021TeipsV2IpgConfigEntry 3 } ieee8021TeipsV2IpgConfigCommandAdmin OBJECT-TYPE SYNTAX IEEE8021TeipsIpgConfigAdmin MAX-ACCESS read-create STATUS current DESCRIPTION "This column is used by the operator to request that the IPG state machine perform some administrative operation. The operator requests a command by writing the command value to this column. The state machine indicates the command that it is performing by setting the value of the CommandStatus column of this table. This column always reads back as clear(1)." REFERENCE "12.24.2.1.3 f" DEFVAL { clear } ::= { ieee8021TeipsV2IpgConfigEntry 4 } ieee8021TeipsV2IpgConfigActiveRequests OBJECT-TYPE SYNTAX IEEE8021TeipsIpgConfigActiveRequests MAX-ACCESS read-only STATUS current DESCRIPTION "This column shows the status of active requests associated with the IPG." REFERENCE "12.24.2.1.3 f)" ::= { ieee8021TeipsV2IpgConfigEntry 5 } ieee8021TeipsV2IpgConfigWTR OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 5..12 ) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "This column is used to configure the wait-to-restore timer for the IPG operation. The timer may be configured in steps of 1 minute between 5 and 12 minutes, the default being 5. Additionally, the value 0 is used to indicate that the IPG is to operate non-revertively. The value 0 is not permitted if the IPG is configured for M:1 IPS operation." REFERENCE "12.24.2.1.3 h)" DEFVAL { 5 } ::= { ieee8021TeipsV2IpgConfigEntry 6 } ieee8021TeipsV2IpgConfigHoldOff OBJECT-TYPE SYNTAX Unsigned32( 0..100 ) UNITS "deciseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This column is used to configure the hold off timer. The purpose is to allow IPS to fix the problem before a higher-layer mechanism, such as PBB-TE TESI protection, is invoked or to allow an inner IPG to fix the problem before IPS is invoked by the outer IPG when IPGs are nested. The hold off timer has a period of from 0 to 10 seconds, the default being 0, with a 100ms granularity." REFERENCE "12.24.2.1.3 i)" DEFVAL { 0 } ::= { ieee8021TeipsV2IpgConfigEntry 7 } ieee8021TeipsV2IpgM1ConfigState OBJECT-TYPE SYNTAX INTEGER { psAssigned(1), segmentOk(2), segmentFailed(3), assignNewPs(4), revertToBetterPs(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This column indicates the current state of the M:1 protection switching state machine for an IPG if M:1 IPS is supported. The value can be one of the following: psAssigned(1) The protection switching state machine is in the PS_ASSIGNED state. segmentOk(2) The protection switching state machine is in the SEGMENT_OK state. segmentFailed(3) The protection switching state machine is in the SEGMENT_FAILED state. assignNewPs(4) The protection switching state machine is in the ASSIGN_NEW_PS state. revertToBetterPs(5) The protection switching state machine is in the REVERT_T0_BETTER_PS state." REFERENCE "12.24.2.1.3 j)" ::= { ieee8021TeipsV2IpgConfigEntry 8 } ieee8021TeipsV2IpgConfigMWTR OBJECT-TYPE SYNTAX Unsigned32 ( 0 | 5..12 ) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "This column is used to configure the M:1 wait-to-restore timer for the IPG operation if M:1 protection is supported. The timer may be configured in steps of 1 minute between 5 and 12 minutes, the default being 5. Additionally, the value 0 is used to indicate that the IPG is to operate non-revertively." REFERENCE "12.24.2.1.3 k)" DEFVAL { 5 } ::= { ieee8021TeipsV2IpgConfigEntry 9 } ieee8021TeipsV2IpgConfigNotifyEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This column is used to enable or disable transmission of ieee8021TeipsV2IpgAdminFailure notifications. These notifications are generated whenever an administrative command cannot be performed by the IPG." DEFVAL { false } ::= { ieee8021TeipsV2IpgConfigEntry 10 } ieee8021TeipsV2IpgConfigStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the persistence of this entry. For permanent objects the ieee8021TeipsV2IpgConfigCommandAdmin column must be writable." DEFVAL { nonVolatile } ::= { ieee8021TeipsV2IpgConfigEntry 11 } -- ****************************************************************** -- NOTIFICATIONS (TRAPS) -- These notifications will be sent to the management entity -- whenever an IPG admin command cannot be performed -- ****************************************************************** ieee8021TeipsV2IpgAdminFailure NOTIFICATION-TYPE OBJECTS { ieee8021TeipsV2IpgConfigState, ieee8021TeipsV2IpgConfigCommandStatus, ieee8021TeipsV2IpgConfigCommandLast } STATUS current DESCRIPTION "An IPG generates this notification whenever an adminisistrative command cannot be executed by the IPS state machine. For example, when a requested manual switch cannot be performed because of a signal failure condition. The management entity receiving the notification can identify the system from the network source address of the notification and can identify the IPG by the indices of the OID of the ieee8021TeipsV2IpgConfigState variable in the notification: ieee8021BridgeBaseComponentId - Identifies the component on the Bridge where the protection group is configured. ieee8021TeipsV2Ipgid - The ID of the protection group. " ::= { ieee8021TeipsV2Notifications 1 } -- -- MIB Module Compliance Statements -- ieee8021TeipsV2Compliances OBJECT IDENTIFIER ::= { ieee8021TeipsV2Conformance 1 } ieee8021TeipsV2Groups OBJECT IDENTIFIER ::= { ieee8021TeipsV2Conformance 2 } -- -- Units of Conformance ieee8021TeipsV2IpgGroup OBJECT-GROUP OBJECTS { ieee8021TeipsV2IpgWorkingMA, ieee8021TeipsV2IpgProtectionMA, ieee8021TeipsV2IpgWorkingPortNumber, ieee8021TeipsV2IpgProtectionPortNumber, ieee8021TeipsV2IpgStorageType, ieee8021TeipsV2IpgRowStatus } STATUS current DESCRIPTION "Objects for the IPG group." ::= { ieee8021TeipsV2Groups 1 } ieee8021TeipsV2CandidatePsGroup OBJECT-GROUP OBJECTS { ieee8021TeipsV2CandidatePsMA, ieee8021TeipsV2CandidatePsPort, ieee8021TeipsV2CandidatePsOper, ieee8021TeipsV2CandidatePsStorageType, ieee8021TeipsV2CandidatePsRowStatus } STATUS current DESCRIPTION "Objects for the Candidate PS group." ::= { ieee8021TeipsV2Groups 2 } ieee8021TeipsV2IpgTesiGroup OBJECT-GROUP OBJECTS { ieee8021TeipsV2TesiId, ieee8021TeipsV2TesiStorageType, ieee8021TeipsV2TesiRowStatus } STATUS current DESCRIPTION "Objects for the IPG Tuple group." ::= { ieee8021TeipsV2Groups 3 } ieee8021TeipsV2IpgConfigManGroup OBJECT-GROUP OBJECTS { ieee8021TeipsV2IpgConfigState, ieee8021TeipsV2IpgConfigCommandStatus, ieee8021TeipsV2IpgConfigCommandLast, ieee8021TeipsV2IpgConfigCommandAdmin, ieee8021TeipsV2IpgConfigActiveRequests, ieee8021TeipsV2IpgConfigNotifyEnable, ieee8021TeipsV2IpgConfigStorageType } STATUS current DESCRIPTION "Mandatory objects for the TeipsConfiguration group." ::= { ieee8021TeipsV2Groups 4 } ieee8021TeipsV2IpgConfigOptGroup OBJECT-GROUP OBJECTS { ieee8021TeipsV2IpgConfigWTR, ieee8021TeipsV2IpgConfigMWTR, ieee8021TeipsV2IpgM1ConfigState, ieee8021TeipsV2IpgConfigHoldOff } STATUS current DESCRIPTION "Optional 0bjects for the TeipsConfiguration group." ::= { ieee8021TeipsV2Groups 5 } ieee8021TeipsV2NotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { ieee8021TeipsV2IpgAdminFailure } STATUS current DESCRIPTION "Objects for the notifications group." ::= { ieee8021TeipsV2Groups 6 } ieee8021TeipsV2Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for support of the TEIPS MIB module." MODULE MANDATORY-GROUPS { ieee8021TeipsV2IpgGroup, ieee8021TeipsV2IpgTesiGroup, ieee8021TeipsV2IpgConfigManGroup, ieee8021TeipsV2NotificationsGroup } GROUP ieee8021TeipsV2IpgConfigOptGroup DESCRIPTION "This group allows implmementation to optionally change the WaitToRestore, M:1 WaitToRestore, and HoldOff timers for IPGs." GROUP ieee8021TeipsV2CandidatePsGroup DESCRIPTION "This group allows implmementation to optionally list candidate Protection Segments when M:1 IPS is deployed." OBJECT ieee8021TeipsV2IpgConfigWTR MIN-ACCESS not-accessible DESCRIPTION "This object is optional." OBJECT ieee8021TeipsV2IpgConfigHoldOff MIN-ACCESS not-accessible DESCRIPTION"This object is optional." OBJECT ieee8021TeipsV2IpgConfigMWTR MIN-ACCESS not-accessible DESCRIPTION "This object is optional." OBJECT ieee8021TeipsV2IpgRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT ieee8021TeipsV2TesiRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." ::= { ieee8021TeipsV2Compliances 1 } END