IEEE8021-CFM-MIB DEFINITIONS ::= BEGIN -- ****************************************************************** -- IEEE P802.1ag(TM) CFM MIB -- ****************************************************************** -- ****************************************************************** -- EDITOR NOTES -- ****************************************************************** -- The MIB described in this document is a work in progress. -- USE AT YOUR OWN RISK! -- -- 02/12/2008 - First revision of the 802.1ap CFM MIB. -- +++++++++++++++++++++++++++++++++++++++++++++++++++ -- The goal of this first revision is to provide a big picture of the type of -- re-indexing needed for the CFM MIB module. Major issues still need to be -- addressed, mainly related to the method used to bring in the new MIB -- and eventually deprecate the old. Two options arose in early discussions: -- 1. Completely replace the entire MIB with a new one (and perhaps -- make some statement about the old MIB being obsolete and/or deprecated), -- 2. Just deprecate the tables that need new indexing and add the new. -- -- The updated CFM MIB module re-indexes the following tables to support -- Service instances defined by one or multiple ISID, VID or defined by -- no identifier. -- *dot1agCfmStackTable -- *dot1agCfmVlanTable -- *dot1agCfmDefaultMdTable -- *dot1agCfmConfigErrorListTable -- *dot1agCfmMaCompTable -- The new module imports new textual conventions from the -- IEEE8021-TC-MIB: -- *IEEE8021ServiceSelectorTypeTC, -- *IEEE8021ServiceSelectorValueTC, -- *IEEE8021ServiceSelectorValueOrNoneTC, -- *IEEE8021PbbComponentIdentifierTC -- -- 03/18/2008 - Proposed second revision of the 802.1ap CFM MIB. -- ++++++++++++++++++++++++++++++++++++++++++++++++++++ -- This proposed revision attempts to solve the problem of -- adding new I-SID shim management functionality to the CFM MIB while preserving -- the original indexing scheme released with 802.1AG-2007. -- This is a very rough draft, more work is needed before -- it can become a usable management module. In particular, -- object descriptions in the new I-SID specific tables must be updated. -- Modifications were performed according to the following comment: -- "In order to avoid deprecating tables and still support configuring CFM -- for more than 4K I-SID service instances, another solution could be to -- use the current CFM MIB tables to configure CFM Entities on "normal -- bridge blocks" (per VLAN/ LAN) and add new tables -- to configure CFM on the new shim ( per I-SID). -- This will mean having a new Stack, Error list , Vid list , default MD -- and MA comp tables in addition to the existing ones to configure the -- Backbone Service Instance Multiplex Entity only." -- --****************************************************************** IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Counter32, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] TEXTUAL-CONVENTION, TimeInterval, TimeStamp, RowStatus, TruthValue, MacAddress, TDomain, TAddress FROM SNMPv2-TC -- [RFC2579] MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580] InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB -- [RFC2863] LldpChassisId, LldpChassisIdSubtype, LldpPortId, LldpPortIdSubtype FROM LLDP-MIB -- [IEEExxx] VlanIdOrNone, VlanId FROM Q-BRIDGE-MIB -- [RFC4363] IEEE8021ServiceSelectorTypeTC, IEEE8021ServiceSelectorValueTC, IEEE8021ServiceSelectorValueOrNoneTC, IEEE8021PbbComponentIdentifierTC FROM IEEE8021-TC-MIB ; ieee8021CfmMib MODULE-IDENTITY LAST-UPDATED "200803180000Z" -- 03/18/2008 00:00GMT ORGANIZATION "IEEE 802.1 Working Group" CONTACT-INFO "WG-URL: http://grouper.ieee.org/groups/802/1/index.html WG-EMail: stds-802-1@ieee.org Contact: David Elie-Dit-Cosaque Alcatel-Lucent 3400 W. Plano Pkwy. Plano, TX 75075, USA E-mail: david.elie_dit_cosaque@alcatel-lucent.com Contact: Norman Finn Cisco Systems 170 W. Tasman Drive San Jose, CA 95134, USA E-mail: nfinn@cisco.com Contact: David Levi 4655 GREAT AMERICA PARKWAY SANTA CLARA, CA 95054, USA Tel: +1-408-495-5138 E-mail: dlevi@nortel.com " DESCRIPTION "Connectivity Fault Management module for managing IEEE 802.1ag" REVISION "200803180000Z" -- 03/13/2008 00:00GMT DESCRIPTION "Included in IEEE P802.1ap Draft Copyright (C) IEEE802.1." ::= { iso(1) org(3) ieee(111) standards-association-numbered-series-standards (2) lan-man-stds (802) ieee802dot1 (1) ieee802dot1mibs (1) 8 } dot1agNotifications OBJECT IDENTIFIER ::= { ieee8021CfmMib 0 } dot1agMIBObjects OBJECT IDENTIFIER ::= { ieee8021CfmMib 1 } dot1agCfmConformance OBJECT IDENTIFIER ::= { ieee8021CfmMib 2 } -- ****************************************************************** -- Groups in the CFM MIB Module -- ****************************************************************** dot1agCfmStack OBJECT IDENTIFIER ::= { dot1agMIBObjects 1 } dot1agPbbCfmStack OBJECT IDENTIFIER ::= { dot1agMIBObjects 2 } dot1agCfmDefaultMd OBJECT IDENTIFIER ::= { dot1agMIBObjects 3 } dot1agCfmVlan OBJECT IDENTIFIER ::= { dot1agMIBObjects 4 } dot1agCfmConfigErrorList OBJECT IDENTIFIER ::= { dot1agMIBObjects 5 } dot1agCfmMd OBJECT IDENTIFIER ::= { dot1agMIBObjects 6 } dot1agCfmMa OBJECT IDENTIFIER ::= { dot1agMIBObjects 7 } dot1agCfmMep OBJECT IDENTIFIER ::= { dot1agMIBObjects 8 } -- ****************************************************************** -- Textual conventions -- ****************************************************************** Dot1agCfmMaintDomainNameType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value that represents a type (and thereby the format) of a Dot1agCfmMaintDomainName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolutely needed. none(1) No format specified, usually because there is not (yet) a Maintenance Domain Name. In this case, a zero length OCTET STRING for the Domain Name field is acceptable. dnsLikeName(2) Domain Name like string, globally unique text string derived from a DNS name. macAddrAndUint(3) MAC address + 2-octet (unsigned) integer. charString(4) RFC2579 DisplayString, except that the character codes 0-31 (decimal) are not used. ieeeReserved(xx) Reserved for definition by IEEE 802.1 xx values can be [5..31] and [64..255] ituReserved(xx) Reserved for definition by ITU-T Y.1731 xx values range from [32..63] To support future extensions, the Dot1agCfmMaintDomainNameType textual convention SHOULD NOT be sub-typed in object type definitions. It MAY be sub-typed in compliance statements in order to require only a subset of these address types for a compliant implementation. Implementations MUST ensure that Dot1agCfmMaintDomainNameType objects and any dependent objects (e.g., Dot1agCfmMaintDomainName objects) are consistent. An inconsistentValue error MUST be generated if an attempt to change an Dot1agCfmMaintDomainNameType object would, for example, lead to an undefined Dot1agCfmMaintDomainName value. In particular, Dot1agCfmMaintDomainNameType/Dot1agCfmMaintDomainName pairs MUST be changed together if the nameType changes. " REFERENCE "802.1ag clause 21.6.5, Table 21-19" SYNTAX INTEGER { none (1), dnsLikeName (2), macAddressAndUint (3), charString (4) } Dot1agCfmMaintDomainName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Denotes a generic Maintenance Domain Name. A Dot1agCfmMaintDomainName value is always interpreted within the context of a Dot1agCfmMaintDomainNameType value. Every usage of the Dot1agCfmMaintDomainName textual convention is required to specify the Dot1agCfmMaintDomainNameType object that provides the context. It is suggested that the Dot1agCfmMaintDomainNameType object be logically registered before the object(s) that use the Dot1agCfmMaintDomainName textual convention, if they appear in the same logical row. The value of a Dot1agCfmMaintDomainName object MUST always be consistent with the value of the associated Dot1agCfmMaintDomainNameType object. Attempts to set an Dot1agCfmMaintDomainName object to a value inconsistent with the associated Dot1agCfmMaintDomainNameType MUST fail with an inconsistentValue error. When this textual convention is used as the syntax of an index object, there may be issues with the limit of 128 sub-identifiers specified in SMIv2, IETF STD 58. In this case, the object definition MUST include a 'SIZE' clause to limit the number of potential instance sub-identifiers; otherwise the applicable constraints MUST be stated in the appropriate conceptual row DESCRIPTION clauses, or in the surrounding documentation if there is no single DESCRIPTION clause that is appropriate. A value of none(1) in the associated Dot1agCfmMaintDomainNameType object means that no Maintenance Domain name is present, and the contents of the Dot1agCfmMaintDomainName object are meaningless. See the DESCRIPTION of the Dot1agCfmMaintAssocNameType TEXTUAL-CONVENTION for a discussion of the length limits on the Maintenance Domain name and Maintenance Association name. " REFERENCE "802.1ag clause 21.6.5" SYNTAX OCTET STRING (SIZE(1..43)) Dot1agCfmMaintAssocNameType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value that represents a type (and thereby the format) of a Dot1agCfmMaintAssocName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolutely needed. primaryVid(1) Primary VLAN ID. 12 bits represented in a 2-octet integer: - 4 least significant bits of the first byte contains the 4 most significant bits of the 12 bits primary VID - second byte contains the 8 least significant bits of the primary VID 0 1 2 3 4 5 6 7 8 +-+-+-+-+-+-+-+-+ |0 0 0 0| (MSB) | +-+-+-+-+-+-+-+-+ | VID LSB | +-+-+-+-+-+-+-+-+ charString(2) RFC2579 DisplayString, except that the character codes 0-31 (decimal) are not used. (1..45) octets unsignedInt16 (3) 2-octet integer/big endian rfc2865VpnId(4) RFC 2685 VPN ID 3 octet VPN authority Organizationally Unique Identifier followed by 4 octet VPN index identifying VPN according to the OUI: 0 1 2 3 4 5 6 7 8 +-+-+-+-+-+-+-+-+ | VPN OUI (MSB) | +-+-+-+-+-+-+-+-+ | VPN OUI | +-+-+-+-+-+-+-+-+ | VPN OUI (LSB) | +-+-+-+-+-+-+-+-+ |VPN Index (MSB)| +-+-+-+-+-+-+-+-+ | VPN Index | +-+-+-+-+-+-+-+-+ | VPN Index | +-+-+-+-+-+-+-+-+ |VPN Index (LSB)| +-+-+-+-+-+-+-+-+ ieeeReserved(xx) Reserved for definition by IEEE 802.1 xx values can be [5..31] and [64..255] ituReserved(xx) Reserved for definition by ITU-T Y.1731 xx values range from [32..63] To support future extensions, the Dot1agCfmMaintAssocNameType textual convention SHOULD NOT be sub-typed in object type definitions. It MAY be sub-typed in compliance statements in order to require only a subset of these address types for a compliant implementation. Implementations MUST ensure that Dot1agCfmMaintAssocNameType objects and any dependent objects (e.g., Dot1agCfmMaintAssocName objects) are consistent. An inconsistentValue error MUST be generated if an attempt to change an Dot1agCfmMaintAssocNameType object would, for example, lead to an undefined Dot1agCfmMaintAssocName value. In particular, Dot1agCfmMaintAssocNameType/Dot1agCfmMaintAssocName pairs MUST be changed together if the nameType changes. The Maintenance Domain name and Maintenance Association name, when put together into the CCM PDU, MUST total 48 octets or less. If the Dot1agCfmMaintDomainNameType object contains none(1), then the Dot1agCfmMaintAssocName object MUST be 45 octets or less in length. Otherwise, the length of the Dot1agCfmMaintDomainName object plus the length of the Dot1agCfmMaintAssocName object, added together, MUST total less than or equal to 44 octets. " REFERENCE "802.1ag clause 21.6.5.4, Table 21-20" SYNTAX INTEGER { primaryVid (1), charString (2), unsignedInt16 (3), rfc2865VpnId (4) } Dot1agCfmMaintAssocName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Denotes a generic Maintenance Association Name. It is the part of the Maintenance Association Identifier which is unique within the Maintenance Domain Name and is appended to the Maintenance Domain Name to form the Maintenance Association Identifier (MAID). A Dot1agCfmMaintAssocName value is always interpreted within the context of a Dot1agCfmMaintAssocNameType value. Every usage of the Dot1agCfmMaintAssocName textual convention is required to specify the Dot1agCfmMaintAssocNameType object that provides the context. It is suggested that the Dot1agCfmMaintAssocNameType object be logically registered before the object(s) that use the Dot1agCfmMaintAssocName textual convention, if they appear in the same logical row. The value of a Dot1agCfmMaintAssocName object MUST always be consistent with the value of the associated Dot1agCfmMaintAssocNameType object. Attempts to set an Dot1agCfmMaintAssocName object to a value inconsistent with the associated Dot1agCfmMaintAssocNameType MUST fail with an inconsistentValue error. When this textual convention is used as the syntax of an index object, there may be issues with the limit of 128 sub-identifiers specified in SMIv2, IETF STD 58. In this case, the object definition MUST include a 'SIZE' clause to limit the number of potential instance sub-identifiers; otherwise the applicable constraints MUST be stated in the appropriate conceptual row DESCRIPTION clauses, or in the surrounding documentation if there is no single DESCRIPTION clause that is appropriate. " REFERENCE "802.1ag clauses 21.6.5.4, 21.6.5.5, 21.6.5.6" SYNTAX OCTET STRING (SIZE(1..45)) Dot1agCfmMDLevel ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "Integer identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower numbers correspond to lower Maintenance Domains, those with more limited physical reach, with the lowest values for CFM PDUs protecting single bridges or physical links. " REFERENCE "802.1ag clauses 18.3, 21.4.1" SYNTAX Integer32 (0..7) Dot1agCfmMDLevelOrNone ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "Integer identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM packets. Lower numbers correspond to lower Maintenance Domains, those with more limited physical reach, with the lowest values for CFM PDUs protecting single bridges or physical links. The value (-1) is reserved to indicate that no MA Level has been assigned. " REFERENCE "802.1ag clauses 18.3, 12.14.3.1.3:c" SYNTAX Integer32 (-1 | 0..7) Dot1agCfmMpDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the direction in which the Maintenance association (MEP or MIP) faces on the bridge port: down(1) Sends Continuity Check Messages away from the MAC Relay Entity. up(2) Sends Continuity Check Messages towards the MAC Relay Entity. " REFERENCE "802.1ag clauses 12.14.6.3.2:c" SYNTAX INTEGER { down (1), up (2) } Dot1agCfmPortStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An enumerated value from he Port Status TLV from the last CCM received from the last MEP. It indicates the ability of the Bridge Port on which the transmitting MEP resides to pass ordinary data, regardless of the status of the MAC (Table 21-10). psNoPortStateTLV(0) Indicates either that no CCM has been received or that no port status TLV was present in the last CCM received. psBlocked(1) Ordinary data cannot pass freely through the port on which the remote MEP resides. Value of enableRmepDefect is equal to false. psUp(2): Ordinary data can pass freely through the port on which the remote MEP resides. Value of enableRmepDefect is equal to true. NOTE: A 0 value is used for psNoPortStateTLV, so that additional code points can be added in a manner consistent with the Dot1agCfmInterfaceStatus textual convention. " REFERENCE "802.1ag clause 12.14.7.6.3:f, 20.19.3 and 21.5.4" SYNTAX INTEGER { psNoPortStateTLV (0), psBlocked (1), psUp (2) } Dot1agCfmInterfaceStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An enumerated value from the Interface Status TLV from the last CCM received from the last MEP. It indicates the status of the Interface within which the MEP transmitting the CCM is configured, or the next lower Interface in the Interface Stack, if the MEP is not configured within an Interface. isNoInterfaceStatusTLV(0) Indicates either that no CCM has been received or that no interface status TLV was present in the last CCM received. isUp(1) The interface is ready to pass packets. isDown(2) The interface cannot pass packets isTesting(3) The interface is in some test mode. isUnknown(4) The interface status cannot be determined for some reason. isDormant(5) The interface is not in a state to pass packets but is in a pending state, waiting for some external event. isNotPresent(6) Some component of the interface is missing isLowerLayerDown(7) The interface is down due to state of the lower layer interfaces NOTE: A 0 value is used for isNoInterfaceStatusTLV, so that these code points can be kept consistent with new code points added to ifOperStatus in the IF-MIB. " REFERENCE "802.1ag clause 12.14.7.6.3:g, 20.19.4 and 21.5.5" SYNTAX INTEGER { isNoInterfaceStatusTLV (0), isUp (1), isDown (2), isTesting (3), isUnknown (4), isDormant (5), isNotPresent (6), isLowerLayerDown (7) } Dot1agCfmHighestDefectPri ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An enumerated value, equal to the contents of the variable highestDefect (20.33.9 and Table 20-1), indicating the highest-priority defect that has been present since the MEP Fault Notification Generator State Machine was last in the FNG_RESET state, either: none(0) no defects since FNG_RESET defRDICCM(1) DefRDICCM defMACstatus(2) DefMACstatus defRemoteCCM(3) DefRemoteCCM defErrorCCM(4) DefErrorCCM defXconCCM(5) DefXconCCM The value 0 is used for no defects so that additional higher priority values can be added, if needed, at a later time, and so that these values correspond with those in Dot1agCfmLowestAlarmPri. " REFERENCE "802.1ag clause 20.1.2, 12.14.7.7.2:c and 20.33.9" SYNTAX INTEGER { none (0), defRDICCM (1), defMACstatus (2), defRemoteCCM (3), defErrorCCM (4), defXconCCM (5) } Dot1agCfmLowestAlarmPri ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An integer value specifying the lowest priority defect that is allowed to generate a Fault Alarm (20.9.5), either: allDef(1) DefRDICCM, DefMACstatus, DefRemoteCCM, DefErrorCCM, and DefXconCCM; macRemErrXcon(2) Only DefMACstatus, DefRemoteCCM, DefErrorCCM, and DefXconCCM (default); remErrXcon(3) Only DefRemoteCCM, DefErrorCCM, and DefXconCCM; errXcon(4) Only DefErrorCCM and DefXconCCM; xcon(5) Only DefXconCCM; or noXcon(6) No defects DefXcon or lower are to be reported; " REFERENCE "802.1ag clause 12.14.7.1.3:k and 20.9.5" SYNTAX INTEGER { allDef (1), macRemErrXcon (2), remErrXcon (3), errXcon (4), xcon (5), noXcon (6) } Dot1agCfmMepId ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "Maintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. " REFERENCE "802.1ag clauses 3.18 and 19.2.1" SYNTAX Unsigned32 (1..8191) Dot1agCfmMepIdOrZero ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "Maintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. The special value 0 is allowed to indicate special cases, for example that no MEPID is configured. Whenever an object is defined with this SYNTAX, then the DESCRIPTION clause of such an object MUST specify what the special value of 0 means. " REFERENCE "802.1ag clause 19.2.1" SYNTAX Unsigned32 (0 | 1..8191) Dot1agCfmMhfCreation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates if the Management Entity can create MHFs. The valid values are: defMHFnone(1) No MHFs can be created for this VID. defMHFdefault(2) MHFs can be created on this VID on any Bridge port through which this VID can pass. defMHFexplicit(3) MHFs can be created for this VID only on Bridge ports through which this VID can pass, and only if a MEP is created at some lower MD Level. defMHFdefer(4) The creation of MHFs is determined by the corresponding Maintenance Domain variable (dot1agCfmMaCompMhfCreation). " REFERENCE "802.1ag clause 12.14.5.1.3:c and 22.2.3" SYNTAX INTEGER { defMHFnone (1), defMHFdefault (2), defMHFexplicit (3), defMHFdefer (4) } Dot1agCfmIdPermission ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates what, if anything, is to be included in the Sender ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. The valid values are: sendIdNone(1) The Sender ID TLV is not to be sent. sendIdChassis(2) The Chassis ID Length, Chassis ID Subtype, and Chassis ID fields of the Sender ID TLV are to be sent. sendIdManage(3) The Management Address Length and Management Address of the Sender ID TLV are to be sent. sendIdChassisManage(4) The Chassis ID Length, Chassis ID Subtype, Chassis ID, Management Address Length and Management Address fields are all to be sent. sendIdDefer(5) The contents of the Sender ID TLV are determined by the corresponding Maintenance Domain variable (dot1agCfmMaCompIdPermission). " REFERENCE "802.1ag clause 12.14.6.1.3:d and 21.5.3" SYNTAX INTEGER { sendIdNone (1), sendIdChassis (2), sendIdManage (3), sendIdChassisManage (4), sendIdDefer (5) } Dot1agCfmCcmInterval ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the interval at which CCMs are sent by a MEP. The possible values are: intervalInvalid(0) No CCMs are sent (disabled). interval300Hz(1) CCMs are sent every 3 1/3 milliseconds (300Hz). interval10ms(2) CCMs are sent every 10 milliseconds. interval100ms(3) CCMs are sent every 100 milliseconds. interval1s(4) CCMs are sent every 1 second. interval10s(5) CCMs are sent every 10 seconds. interval1min(6) CCMs are sent every minute. interval10min(7) CCMs are sent every 10 minutes. Note: enumerations start at zero to match the 'CCM Interval field' protocol field. " REFERENCE "802.1ag clauses 12.14.6.1.3:e, 20.8.1 and 21.6.1.3" SYNTAX INTEGER { intervalInvalid (0), interval300Hz (1), interval10ms (2), interval100ms (3), interval1s (4), interval10s (5), interval1min (6), interval10min (7) } Dot1agCfmFngState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the diferent states of the MEP Fault Notification Generator State Machine. fngReset(1) No defect has been present since the dot1agCfmMepFngResetTime timer expired, or since the state machine was last reset. fngDefect(2) A defect is present, but not for a long enough time to be reported (dot1agCfmMepFngAlarmTime). fngReportDefect(3) A momentary state during which the defect is reported by sending a dot1agCfmFaultAlarm notification, if that action is enabled. fngDefectReported(4) A defect is present, and some defect has been reported. fngDefectClearing(5) No defect is present, but the dot1agCfmMepFngResetTime timer has not yet expired. " REFERENCE "802.1ag clause 12.14.7.1.3:f and 20.35" SYNTAX INTEGER { fngReset (1), fngDefect (2), fngReportDefect (3), fngDefectReported (4), fngDefectClearing (5) } Dot1agCfmRelayActionFieldValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Possible values the Relay action field can take." REFERENCE "802.1ag clauses 12.14.7.5.3:g, 20.36.2.5, 21.9.5, and Table 21-27" SYNTAX INTEGER { rlyHit (1), rlyFdb (2), rlyMpdb (3) } Dot1agCfmIngressActionFieldValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Possible values returned in the ingress action field." REFERENCE "802.1ag clauses 12.14.7.5.3:g, 20.36.2.6, 21.9.8.1, and Table 21-30 " SYNTAX INTEGER { ingNoTlv (0), ingOk (1), ingDown (2), ingBlocked (3), ingVid (4) } Dot1agCfmEgressActionFieldValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Possible values returned in the egress action field" REFERENCE "802.1ag clauses 12.14.7.5.3:o, 20.36.2.10, 21.9.9.1, and Table 21-32" SYNTAX INTEGER { egrNoTlv (0), egrOK (1), egrDown (2), egrBlocked (3), egrVid (4) } Dot1agCfmRemoteMepState::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Operational state of the remote MEP state machine. This state machine monitors the reception of valid CCMs from a remote MEP with a specific MEPID. It uses a timer that expires in 3.5 times the length of time indicated by the dot1agCfmMaNetCcmInterval object. rMepIdle(1) Momentary state during reset. rMepStart(2) The timer has not expired since the state machine was reset, and no valid CCM has yet been received. rMepFailed(3) The timer has expired, both since the state machine was reset, and since a valid CCM was received. rMepOk(4) The timer has not expired since a valid CCM was received. " REFERENCE "802.1ag clauses 12.14.7.6.3:b, 20.22" SYNTAX INTEGER { rMepIdle (1), rMepStart (2), rMepFailed (3), rMepOk (4) } Dot1afCfmIndexIntegerNextFree ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "An integer which may be used as a new Index in a table. The special value of 0 indicates that no more new entries can be created in the relevant table. When a MIB is used for configuration, an object with this SYNTAX always contains a legal value (if non-zero) for an index that is not currently used in the relevant table. The Command Generator (Network Management Application) reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET. When the SET is performed, the Command Responder (agent) MUST determine whether the value is indeed still unused; Two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds and the Command Responder (agent) changes the value of this object, according to an implementation-specific algorithm. If the value is in use, however, the SET fails. The Network Management Application MUST then re-read this variable to obtain a new usable value. An OBJECT-TYPE definition using this SYNTAX MUST specify the relevant table for which the object is providing this functionality. " SYNTAX Unsigned32 (0..4294967295) Dot1agCfmMepDefects ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A MEP can detect and report a number of defects, and multiple defects can be present at the same time. These defects are: bDefRDICCM(0) A remote MEP is reported the RDI bit in its last CCM. bDefMACstatus(1) Either some remote MEP is reporting its Interface Status TLV as not isUp, or all remote MEPs are reporting a Port Status TLV that contains some value other than psUp. bDefRemoteCCM(2) The MEP is not receiving valid CCMs from at least one of the remote MEPs. bDefErrorCCM(3) The MEP has received at least one invalid CCM whose CCM Interval has not yet timed out. bDefXconCCM(4) The MEP has received at least one CCM from either another MAID or a lower MD Level whose CCM Interval has not yet timed out. " REFERENCE "802.1ag clauses 12.14.7.1.3:o, 12.14.7.1.3:p, 12.14.7.1.3:q, 12.14.7.1.3:r, and 12.14.7.1.3:s." SYNTAX BITS { bDefRDICCM(0), bDefMACstatus(1), bDefRemoteCCM(2), bDefErrorCCM(3), bDefXconCCM(4) } Dot1agCfmConfigErrors ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "While making the MIP creation evaluation described in 802.1ag clause 22.2.3, the management entity can encounter errors in the configuration. These are possible errors that can be encountered: CFMleak(0) MA x is associated with a specific VID list, one or more of the VIDs in MA x can pass through the Bridge Port, no Down MEP is configured on any Bridge Port for MA x, and some other MA y, at a higher MD Level than MA x, and associated with at least one of the VID(s) also in MA x, does have a MEP configured on the Bridge Port. conflictingVids(1) MA x is associated with a specific VID list, an Up MEP is configured on MA x on the Bridge Port, and some other MA y, associated with at least one of the VID(s) also in MA x, also has an Up MEP configured on some Bridge Port. ExcessiveLevels(2) The number of different MD Levels at which MIPs are to be created on this port exceeds the Bridge's capabilities (see subclause 22.3). OverlappedLevels(3) A MEP is created for one VID at one MD Level, but a MEP is configured on another VID at that MD Level or higher, exceeding the Bridge's capabilities. " REFERENCE "802.1ag clause 12.14.4.1.3:b and clauses 22.2.3 and 22.2.4" SYNTAX BITS { cfmLeak(0), conflictingVids(1), excessiveLevels(2), overlappedLevels(3) } -- ****************************************************************** -- The Stack Object. This group will contain all the MIBs objects -- needed to access the Stack managed object. -- ****************************************************************** -- ****************************************************************** -- The CFM Stack Table -- ****************************************************************** dot1agCfmStackTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agCfmStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is one CFM Stack table per bridge. It permits the retrieval of information about the Maintenance Points configured on any given interface. " REFERENCE "802.1ag clauses 12.14.2" ::= { dot1agCfmStack 1 } dot1agCfmStackEntry OBJECT-TYPE SYNTAX Dot1agCfmStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Stack table entry" INDEX { dot1agCfmStackifIndex, dot1agCfmStackVlanIdOrNone, dot1agCfmStackMdLevel, dot1agCfmStackDirection } ::= { dot1agCfmStackTable 1 } Dot1agCfmStackEntry ::= SEQUENCE { dot1agCfmStackifIndex InterfaceIndex, dot1agCfmStackVlanIdOrNone VlanIdOrNone, dot1agCfmStackMdLevel Dot1agCfmMDLevel, dot1agCfmStackDirection Dot1agCfmMpDirection, dot1agCfmStackMdIndex Unsigned32, dot1agCfmStackMaIndex Unsigned32, dot1agCfmStackMepId Dot1agCfmMepIdOrZero, dot1agCfmStackMacAddress MacAddress } dot1agCfmStackifIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the Bridge Port or aggregated port on which MEPs or MHFs might be configured. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable, and rearrange the dot1agCfmStackTable, so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL delete all entries in the dot1agCfmStackTable with the interface index. " REFERENCE "802.1ag clause 12.14.2.1.2:a" ::= { dot1agCfmStackEntry 1 } dot1agCfmStackVlanIdOrNone OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN ID to which the MP is attached, or 0, if none." REFERENCE "802.1ag clauses 12.14.2.1.2:d, 22.1.7" ::= { dot1agCfmStackEntry 2 } dot1agCfmStackMdLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevel MAX-ACCESS not-accessible STATUS current DESCRIPTION "MD Level of the Maintenance Point." REFERENCE "802.1ag clause 12.14.2.1.2:b" ::= { dot1agCfmStackEntry 3 } dot1agCfmStackDirection OBJECT-TYPE SYNTAX Dot1agCfmMpDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction in which the MP faces on the Bridge Port" REFERENCE "802.1ag clause 12.14.2.1.2:c" ::= { dot1agCfmStackEntry 4 } dot1agCfmStackMdIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the Maintenance Domain in the dot1agCfmMdTable to which the MP is associated, or 0, if none." REFERENCE "802.1ag clause 12.14.2.1.3:b" ::= { dot1agCfmStackEntry 5 } dot1agCfmStackMaIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the MA in the dot1agCfmMaNetTable and dot1agCfmMaCompTable to which the MP is associated, or 0, if none." REFERENCE "802.1ag clause 12.14.2.1.3:c" ::= { dot1agCfmStackEntry 6 } dot1agCfmStackMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "If an MEP is configured, the MEPID, else 0" REFERENCE "802.1ag clause 12.14.2.1.3:d" ::= { dot1agCfmStackEntry 7 } dot1agCfmStackMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the MP." REFERENCE "802.1ag clause 12.14.2.1.3:e" ::= { dot1agCfmStackEntry 8 } -- ****************************************************************** -- The VLAN Table -- ****************************************************************** dot1agCfmVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agCfmVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the association of VIDs into VLANs. There is an entry in this table, for each component of the bridge, for each VID that is: a) a VID belonging to a VLAN associated with more than one VID; and b) not the Primary VLAN of that VID. The entry in this table contains the Primary VID of the VLAN. By default, this table is empty, meaning that every VID is the Primary VID of a single-VID VLAN. VLANs that are associated with only one VID SHOULD NOT have an entry in this table. The writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clauses 12.14.3.1.3:a, 12.14.3.2.2:a, 12.14.5.3.2:c, 12.14.6.1.3:b, 22.1.5." ::= { dot1agCfmVlan 1 } dot1agCfmVlanEntry OBJECT-TYPE SYNTAX Dot1agCfmVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN table entry." INDEX { dot1agCfmVlanComponentId, dot1agCfmVlanVid } ::= { dot1agCfmVlanTable 1 } Dot1agCfmVlanEntry ::= SEQUENCE { dot1agCfmVlanComponentId IEEE8021PbbComponentIdentifierTC, dot1agCfmVlanVid VlanId, dot1agCfmVlanPrimaryVid VlanId, dot1agCfmVlanRowStatus RowStatus } dot1agCfmVlanComponentId OBJECT-TYPE SYNTAX IEEE8021PbbComponentIdentifierTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bridge component within the system to which the information in this dot1agCfmVlanEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. " REFERENCE "802.1ag clause 17.5" ::= { dot1agCfmVlanEntry 1 } dot1agCfmVlanVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a VLAN ID belonging to a VLAN that is associated with more than one VLAN ID, and this is not the Primary VID of the VLAN. " ::= { dot1agCfmVlanEntry 2 } dot1agCfmVlanPrimaryVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Primary VLAN ID of the VLAN with which this entry's dot1agCfmVlanVid is associated. This value MUST not equal the value of dot1agCfmVlanVid. " ::= { dot1agCfmVlanEntry 3 } dot1agCfmVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. " ::= { dot1agCfmVlanEntry 4 } -- ******************************************************************* -- The Default MD Level object. This group will contain all the -- MIB objects needed to access and modify default MD level -- managed objects. -- ******************************************************************* dot1agCfmDefaultMdDefLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevel MAX-ACCESS read-write STATUS current DESCRIPTION "A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for each dot1agCfmDefaultMdEntry whose dot1agCfmDefaultMdLevel object contains the value -1. After this initialization, this object needs to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 12.14.3.1.3:c, 12.14.3.2.2:b" DEFVAL {0} ::= { dot1agCfmDefaultMd 1 } dot1agCfmDefaultMdDefMhfCreation OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation { defMHFnone (1), defMHFdefault (2), defMHFexplicit (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "A value indicating if the Management entity can create MHFs (MIP Half Function) for the VID, for each dot1agCfmDefaultMdEntry whose dot1agCfmDefaultMdMhfCreation object contains the value defMHFdefer. Since, in this variable, there is no encompassing Maintenance Domain, the value defMHFdefer is not allowed. After this initialization, this object needs to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 12.14.3.1.3:d" DEFVAL {defMHFnone} ::= { dot1agCfmDefaultMd 2 } dot1agCfmDefaultMdDefIdPermission OBJECT-TYPE SYNTAX Dot1agCfmIdPermission { sendIdNone (1), sendIdChassis (2), sendIdManage (3), sendIdChassisManage (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain, for each dot1agCfmDefaultMdEntry whose dot1agCfmDefaultMdIdPermission object contains the value sendIdDefer. Since, in this variable, there is no encompassing Maintenance Domain, the value sendIdDefer is not allowed. After this initialization, this object needs to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 12.14.3.1.3:e" DEFVAL { sendIdNone } ::= { dot1agCfmDefaultMd 3 } -- ******************************************************************* -- The Default MD Level Table -- ******************************************************************* dot1agCfmDefaultMdTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agCfmDefaultMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each bridge component, the Default MD Level Managed Object controls MHF creation for VIDs that are not attached to a specific Maintenance Association Managed Object, and Sender ID TLV transmission by those MHFs. For each Bridge Port, and for each VLAN ID whose data can pass through that Bridge Port, an entry in this table is used by the algorithm in subclause 22.2.3 only if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as this table's entry, and on which MA an Up MEP is defined. If there exists such an MA, that MA's objects are used by the algorithm in subclause 22.2.3 in place of this table entry's objects. The agent maintains the value of dot1agCfmDefaultMdStatus to indicate whether this entry is overridden by an MA. When first initialized, the agent creates this table automatically with entries for all VLAN IDs, with the default values specified for each object. After this initialization, the writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 12.14.3" ::= { dot1agCfmDefaultMd 4 } dot1agCfmDefaultMdEntry OBJECT-TYPE SYNTAX Dot1agCfmDefaultMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Default MD Level table entry." INDEX { dot1agCfmDefaultMdComponentId, dot1agCfmDefaultMdPrimaryVid } ::= { dot1agCfmDefaultMdTable 1 } Dot1agCfmDefaultMdEntry ::= SEQUENCE { dot1agCfmDefaultMdComponentId IEEE8021PbbComponentIdentifierTC, dot1agCfmDefaultMdPrimaryVid VlanId, dot1agCfmDefaultMdStatus TruthValue, dot1agCfmDefaultMdLevel Dot1agCfmMDLevelOrNone, dot1agCfmDefaultMdMhfCreation Dot1agCfmMhfCreation, dot1agCfmDefaultMdIdPermission Dot1agCfmIdPermission } dot1agCfmDefaultMdComponentId OBJECT-TYPE SYNTAX IEEE8021PbbComponentIdentifierTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bridge component within the system to which the information in this dot1agCfmDefaultMdEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. " REFERENCE "802.1ag clause 17.5" ::= { dot1agCfmDefaultMdEntry 1 } dot1agCfmDefaultMdPrimaryVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Primary VID of the VLAN to which this entry's objects apply." ::= { dot1agCfmDefaultMdEntry 2 } dot1agCfmDefaultMdStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "State of this Default MD Level table entry. True if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as this table's entry, and on which MA an Up MEP is defined, else false. " REFERENCE "802.1ag clause 12.14.3.1.3:b" ::= { dot1agCfmDefaultMdEntry 3 } dot1agCfmDefaultMdLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevelOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for the VLAN to which this entry's objects apply. If this object has the value -1, the MD Level for MHF creation for this VLAN is controlled by dot1agCfmDefaultMdDefLevel. " REFERENCE "802.1ag clause 12.14.3.1.3:c, 12.14.3.2.2:b" DEFVAL {-1} ::= { dot1agCfmDefaultMdEntry 4 } dot1agCfmDefaultMdMhfCreation OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation MAX-ACCESS read-write STATUS current DESCRIPTION "A value indicating if the Management entity can create MHFs (MIP Half Function) for this VID at this MD Level. If this object has the value defMHFdefer, MHF creation for this VLAN is controlled by dot1agCfmDefaultMdDefMhfCreation. The value of this variable is meaningless if the values of dot1agCfmDefaultMdStatus is false. " REFERENCE "802.1ag clause 12.14.3.1.3:d" DEFVAL {defMHFdefer} ::= { dot1agCfmDefaultMdEntry 5 } dot1agCfmDefaultMdIdPermission OBJECT-TYPE SYNTAX Dot1agCfmIdPermission MAX-ACCESS read-write STATUS current DESCRIPTION "Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain. If this object has the value sendIdDefer, Sender ID TLV transmission for this VLAN is controlled by dot1agCfmDefaultMdDefIdPermission. The value of this variable is meaningless if the values of dot1agCfmDefaultMdStatus is false. " REFERENCE "802.1ag clause 12.14.3.1.3:e" DEFVAL { sendIdDefer } ::= { dot1agCfmDefaultMdEntry 6 } -- ****************************************************************** -- The CFM configuration error list managed object. This group will -- contain all the MIB objects used to read the interfaces and VIDs -- configured incorrectly. -- ****************************************************************** -- ****************************************************************** -- The CFM Configuration Error List Table -- ****************************************************************** dot1agCfmConfigErrorListTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agCfmConfigErrorListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The CFM Configuration Error List table provides a list of Interfaces and VIDs that are incorrectly configured. " REFERENCE "802.1ag clause 12.14.4" ::= {dot1agCfmConfigErrorList 1} dot1agCfmConfigErrorListEntry OBJECT-TYPE SYNTAX Dot1agCfmConfigErrorListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Config Error List Table entry" INDEX { dot1agCfmConfigErrorListVid, dot1agCfmConfigErrorListIfIndex } ::= { dot1agCfmConfigErrorListTable 1} Dot1agCfmConfigErrorListEntry ::= SEQUENCE { dot1agCfmConfigErrorListVid VlanId, dot1agCfmConfigErrorListIfIndex InterfaceIndex, dot1agCfmConfigErrorListErrorType Dot1agCfmConfigErrors } dot1agCfmConfigErrorListVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN ID of the VLAN with interfaces in error." REFERENCE "802.1ag Clause 12.14.4.1.2:a" ::= { dot1agCfmConfigErrorListEntry 1 } dot1agCfmConfigErrorListIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is the IfIndex of the interface. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL delete any entries in dot1agCfmConfigErrorListTable indexed by that InterfaceIndex value. " REFERENCE "802.1ag clause 12.14.4.1.2:b" ::= { dot1agCfmConfigErrorListEntry 2 } dot1agCfmConfigErrorListErrorType OBJECT-TYPE SYNTAX Dot1agCfmConfigErrors MAX-ACCESS read-only STATUS current DESCRIPTION "A vector of Boolean error conditions from 22.2.4, any of which may be true: 0) CFMleak; 1) ConflictingVids; 2) ExcessiveLevels; 3) OverlappedLevels. " REFERENCE "802.1ag clause 12.14.4.1.3:b" ::= { dot1agCfmConfigErrorListEntry 3 } -- ****************************************************************** -- The Maintenance Domain Managed Object. This group contains all -- the MIB objects used to maintain Maintenance Domains. -- ****************************************************************** dot1agCfmMdTableNextIndex OBJECT-TYPE SYNTAX Dot1afCfmIndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for dot1agCfmMdIndex in the dot1agCfmMdTable, or a zero to indicate that none exist. " ::= { dot1agCfmMd 1 } -- ****************************************************************** -- The Maintenance Domain Table -- ****************************************************************** dot1agCfmMdTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agCfmMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Maintenance Domain table. Each row in the table represents a different Maintenance Domain. A Maintenance Domain is described in 802.1ag (3.21) as the network or the part of the network for which faults in connectivity are to be managed. The boundary of a Maintenance Domain is defined by a set of DSAPs, each of which can become a point of connectivity to a service instance. " REFERENCE "802.1ag clauses 3.21 and 18.1" ::= { dot1agCfmMd 2 } dot1agCfmMdEntry OBJECT-TYPE SYNTAX Dot1agCfmMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Maintenance Domain table entry. This entry is not lost upon reboot. It is backed up by stable storage. " INDEX {dot1agCfmMdIndex } ::= { dot1agCfmMdTable 1 } Dot1agCfmMdEntry ::= SEQUENCE { dot1agCfmMdIndex Unsigned32, dot1agCfmMdFormat Dot1agCfmMaintDomainNameType, dot1agCfmMdName Dot1agCfmMaintDomainName, dot1agCfmMdMdLevel Dot1agCfmMDLevel, dot1agCfmMdMhfCreation Dot1agCfmMhfCreation, dot1agCfmMdMhfIdPermission Dot1agCfmIdPermission, dot1agCfmMdMaNextIndex Dot1afCfmIndexIntegerNextFree, dot1agCfmMdRowStatus RowStatus } dot1agCfmMdIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index to the Maintenance Domain table. dot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. Referential integrity is required, i.e., the index needs to be persistent upon a reboot or restart of a device. The index can never be reused for other Maintenance Domain. The index value SHOULD keep increasing up to the time that they wrap around. This is to facilitate access control based on OID. " ::= { dot1agCfmMdEntry 1 } dot1agCfmMdFormat OBJECT-TYPE SYNTAX Dot1agCfmMaintDomainNameType MAX-ACCESS read-create STATUS current DESCRIPTION "The type (and thereby format) of the Maintenance Domain Name." REFERENCE "802.1ag clause 21.6.5.1" DEFVAL { charString } ::= { dot1agCfmMdEntry 2 } dot1agCfmMdName OBJECT-TYPE SYNTAX Dot1agCfmMaintDomainName MAX-ACCESS read-create STATUS current DESCRIPTION "The Maintenance Domain name. The type/format of this object is determined by the value of the dot1agCfmMdNameType object. Each Maintenance Domain has unique name amongst all those used or available to a service provider or operator. It facilitates easy identification of administrative responsibility for each Maintenance Domain. Clause 3.23 defines a Maintenance Domain name as the identifier, unique over the domain for which CFM is to protect against accidental concatenation of Service Instances, of a particular Maintenance Domain. " REFERENCE "802.1ag clauses 3.23, 12.14.5, and 21.6.5.3" DEFVAL { "DEFAULT" } ::= { dot1agCfmMdEntry 3 } dot1agCfmMdMdLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevel MAX-ACCESS read-create STATUS current DESCRIPTION "The Maintenance Domain Level." REFERENCE "802.1ag clause 12.14.5.1.3:b" DEFVAL { 0 } ::= { dot1agCfmMdEntry 4 } dot1agCfmMdMhfCreation OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation { defMHFnone (1), defMHFdefault (2), defMHFexplicit (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this Maintenance Domain. Since, in this variable, there is no encompassing Maintenance Domain, the value defMHFdefer is not allowed. " REFERENCE "802.1ag clause 12.14.5.1.3:c" DEFVAL { defMHFnone } ::= { dot1agCfmMdEntry 5 } dot1agCfmMdMhfIdPermission OBJECT-TYPE SYNTAX Dot1agCfmIdPermission { sendIdNone (1), sendIdChassis (2), sendIdManage (3), sendIdChassisManage (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this Maintenance Domain. Since, in this variable, there is no encompassing Maintenance Domain, the value sendIdDefer is not allowed. " REFERENCE "802.1ag clause 12.14.5.1.3:d" DEFVAL { sendIdNone } ::= { dot1agCfmMdEntry 6 } dot1agCfmMdMaNextIndex OBJECT-TYPE SYNTAX Dot1afCfmIndexIntegerNextFree MAX-ACCESS read-only STATUS current DESCRIPTION "Value to be used as the index of the MA table entries, both the dot1agCfmMaNetTable and the dot1agCfmMaCompTable, for this Maintenance Domain when the management entity wants to create a new row in those tables. " ::= { dot1agCfmMdEntry 7 } dot1agCfmMdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. " ::= { dot1agCfmMdEntry 8 } -- ****************************************************************** -- The Maintenance Association Object. This group contains all the -- MIB objects used to read, create, modify, and delete Maintenance -- Associations in the MIB. -- ****************************************************************** -- ****************************************************************** -- The Maintenance Association (MA) Network Table -- ****************************************************************** dot1agCfmMaNetTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agCfmMaNetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the part of the complete MA table that is constant across all Bridges in a Maintenance Domain, and across all components of a single Bridge. That part of the MA table that can vary from Bridge component to Bridge component is contained in the dot1agCfmMaCompTable. Creation of a Service Instance establishes a connectionless association among the selected DSAPs. Configuring a Maintenance association End Point (MEP) at each of the DSAPs creates a Maintenance Association (MA) to monitor that connectionless connectivity. The MA is identified by a Short MA Name that is unique within the Maintenance Domain and chosen to facilitate easy identification of the Service Instance. Together, the Maintenance Domain Name and the Short MA Name form the Maintenance Association Identifier (MAID) that is carried in CFM Messages to identify incorrect connectivity among Service Instances. A small integer, the Maintenance association End Point Identifier (MEPID), identifies each MEP among those configured on a single MA (802.1ag clauses 3.16 and 18.2). This table uses two indices, first index is the index of the Maintenance Domain table. The second index is the same as the index of the dot1agCfmMaCompEntry for the same MA. The writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 18.2" ::= { dot1agCfmMa 1 } dot1agCfmMaNetEntry OBJECT-TYPE SYNTAX Dot1agCfmMaNetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MA table entry." INDEX {dot1agCfmMdIndex, dot1agCfmMaIndex } ::= { dot1agCfmMaNetTable 1 } Dot1agCfmMaNetEntry ::= SEQUENCE { dot1agCfmMaIndex Unsigned32, dot1agCfmMaNetFormat Dot1agCfmMaintAssocNameType, dot1agCfmMaNetName Dot1agCfmMaintAssocName, dot1agCfmMaNetCcmInterval Dot1agCfmCcmInterval, dot1agCfmMaNetRowStatus RowStatus } dot1agCfmMaIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the MA table dot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation. " ::= { dot1agCfmMaNetEntry 1 } dot1agCfmMaNetFormat OBJECT-TYPE SYNTAX Dot1agCfmMaintAssocNameType MAX-ACCESS read-create STATUS current DESCRIPTION "The type (and thereby format) of the Maintenance Association Name. " REFERENCE "802.1ag clauses 21.6.5.4" ::= { dot1agCfmMaNetEntry 2 } dot1agCfmMaNetName OBJECT-TYPE SYNTAX Dot1agCfmMaintAssocName MAX-ACCESS read-create STATUS current DESCRIPTION "The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object. This name MUST be unique within a maintenance domain. " REFERENCE "802.1ag clauses 21.6.5.6, and Table 21-20" ::= { dot1agCfmMaNetEntry 3 } dot1agCfmMaNetCcmInterval OBJECT-TYPE SYNTAX Dot1agCfmCcmInterval MAX-ACCESS read-create STATUS current DESCRIPTION "Interval between CCM transmissions to be used by all MEPs in the MA. " REFERENCE "802.1ag clause 12.14.6.1.3:e" DEFVAL { interval1s } ::= { dot1agCfmMaNetEntry 4 } dot1agCfmMaNetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. " ::= { dot1agCfmMaNetEntry 5 } -- ****************************************************************** -- The Maintenance Association (MA) Component Table -- ****************************************************************** dot1agCfmMaCompTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agCfmMaCompEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the part of the complete MA table that is variable across the Bridges in a Maintenance Domain, or across the components of a single Bridge. That part of the MA table that is constant across the Bridges and their components in a Maintenance Domain is contained in the dot1agCfmMaNetTable. This table uses three indices, first index is the IEEE8021PbbComponentIdentifierTC that identifies the component within the Bridge for which the information in the dot1agCfmMaCompEntry applies. The second is the index of the Maintenance Domain table. The third index is the same as the index of the dot1agCfmMaNetEntry for the same MA. The writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 18.2" ::= { dot1agCfmMa 2 } dot1agCfmMaCompEntry OBJECT-TYPE SYNTAX Dot1agCfmMaCompEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MA table entry." INDEX {dot1agCfmMaComponentId, dot1agCfmMdIndex, dot1agCfmMaIndex } ::= { dot1agCfmMaCompTable 1 } Dot1agCfmMaCompEntry ::= SEQUENCE { dot1agCfmMaComponentId IEEE8021PbbComponentIdentifierTC, dot1agCfmMaCompPrimaryVlanId VlanIdOrNone, dot1agCfmMaCompMhfCreation Dot1agCfmMhfCreation, dot1agCfmMaCompIdPermission Dot1agCfmIdPermission, dot1agCfmMaCompNumberOfVids Unsigned32, dot1agCfmMaCompRowStatus RowStatus } dot1agCfmMaComponentId OBJECT-TYPE SYNTAX IEEE8021PbbComponentIdentifierTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bridge component within the system to which the information in this dot1agCfmMaCompEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. " REFERENCE "802.1ag clause 17.5" ::= { dot1agCfmMaCompEntry 1 } dot1agCfmMaCompPrimaryVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The Primary VLAN ID with which the Maintenance Association is associated, or 0 if the MA is not attached to any VID. If the MA is associated with more than one VID, the dot1agCfmVlanTable lists them." REFERENCE "802.1ag clause 12.14.6.1.3:b" ::= { dot1agCfmMaCompEntry 2 } dot1agCfmMaCompMhfCreation OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates if the Management entity can create MHFs (MIP Half Function) for this MA. " REFERENCE "802.1ag clause 12.14.6.1.3:c" DEFVAL { defMHFdefer } ::= { dot1agCfmMaCompEntry 3 } dot1agCfmMaCompIdPermission OBJECT-TYPE SYNTAX Dot1agCfmIdPermission MAX-ACCESS read-create STATUS current DESCRIPTION "Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this MA. " REFERENCE "802.1ag clause 12.14.6.1.3:d" DEFVAL { sendIdDefer } ::= { dot1agCfmMaCompEntry 4 } dot1agCfmMaCompNumberOfVids OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of VIDs associated with the MA. " REFERENCE "802.1ag clause 12.14.6.1.3:b" ::= { dot1agCfmMaCompEntry 5 } dot1agCfmMaCompRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. " ::= { dot1agCfmMaCompEntry 6 } -- ****************************************************************** -- The list of known MEPs for a given MA -- ****************************************************************** dot1agCfmMaMepListTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agCfmMaMepListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of MEPIDs that belong to this MA. Clause 12.14.6.1.3 specifies that a list of MEPIDs in all bridges in that MA, but since SNMP SMI does not allow to state in a MIB that an object in a table is an array, the information has to be stored in another table with two indices, being the first index, the index of the table that contains the list or array. For all bridges in which the same MAID {dot1agCfmMdFormat, dot1agCfmMdName, dot1agCfmMaNetFormat, and dot1agCfmMaNetName} is configured, the same set of dot1agCfmMaMepListIdentifiers MUST be configured in the bridges' dot1agCfmMaMepListTables. This allows each MEP to determine whether or not it is receiving CCMs from all of the other MEPs in the MA. For example, if one were creating a new MA whose MAID were {charString, 'Dom1', charString, 'MA1'}, that had 2 MEPs, whose MEPIDs were 1 and 3, one could, in Bridge A: 1. Get a new MD index d from dot1agCfmMdTableNextIndex. 2. Create the Maintenance Domain {charString, 'Dom1'}. 3. Get a new MA index a from dot1agCfmMdMaNextIndex [d]. 4. Create the Maintenance Association {charString, 'MA1'}. 5. Create a new dot1agCfmMaMepListEntry for each of the MEPs in the MA: [d, a, 1] and [d, a, 3]. 6. Create one of the new MEPs, say [d, a, 1]. Then, in Bridge B: 7. Do all of these steps 1-6, except for using the other MEPID for the new MEP in Step 6, in this example, MEPID 3. Note that, when creating the MA, MEP List Table, and MEP entries in the second bridge, the indices 'd' and 'a' identifying the MAID {charString, 'Dom1', charString, 'MA1'} may have different values than those in the first Bridge. " REFERENCE "802.1ag clause 12.14.6.1.3:g" ::= { dot1agCfmMa 3 } dot1agCfmMaMepListEntry OBJECT-TYPE SYNTAX Dot1agCfmMaMepListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The known MEPS table entry." INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMaMepListIdentifier } ::= { dot1agCfmMaMepListTable 1 } Dot1agCfmMaMepListEntry ::= SEQUENCE { dot1agCfmMaMepListIdentifier Dot1agCfmMepId, dot1agCfmMaMepListRowStatus RowStatus } dot1agCfmMaMepListIdentifier OBJECT-TYPE SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "MEPID" REFERENCE "802.1ag clause 12.14.6.1.3:g" ::= { dot1agCfmMaMepListEntry 1 } dot1agCfmMaMepListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. Read SNMPv2-TC (RFC1903) for an explanation of the possible values this object can take. " ::= { dot1agCfmMaMepListEntry 2 } -- ****************************************************************** -- The MEP Object. This object represents a Maintenance End -- Point as described in 802.1ag document. -- ****************************************************************** -- ****************************************************************** -- The MEP Table -- ****************************************************************** dot1agCfmMepTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Maintenance Association End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with a specific DSAP of a Service Instance, which can generate and receive CFM PDUs and track any responses. It is an end point of a single Maintenance Association, and is an endpoint of a separate Maintenance Entity for each of the other MEPs in the same Maintenance Association (802.1ag clause 3.17). This table uses three indices. The first two indices are the indices of the Maintenance Domain and MA tables, the reason being that a MEP is always related to an MA and Maintenance Domain. The MEP table also stores all the managed objects for sending LBM and LTM. *LBM Managed objects LBM Managed objects in the MEP table enables the management entity to initiate transmission of Loopback messages. It will signal the MEP that it SHOULD transmit some number of Loopback messages and detect the detection (or lack thereof) of the corresponding Loopback messages. Steps to use entries in this table: 1) Wait for dot1agCfmMepTransmitLbmStatus value to be true. To do this do this sequence: a. an SNMP GET for both SnmpSetSerialNo and dot1agCfmMepTransmitLbmStatus objects (in same SNMP PDU). b. Check if value for dot1agCfmMepTransmitLbmStatus is true. - if not, wait x seconds, go to step a above. - if yes, save the value of SnmpSetSerialNo and go to step 2) below 2) Change dot1agCfmMepTransmitLbmStatus value from true to false to ensure no other management entity will use the service. In order to not disturb a possible other NMS do this by sending an SNMP SET for both SnmpSetSerialNo and dot1agCfmMepTransmitLbmStatus objects (in same SNMP PDU, and make sure SNmpSetSerialNo is the first varBind). For the SnmpSetSerialNo varBind, use the value that you obtained in step 1)a.. This ensures that two cooperating NMSes will not step on each others toes. 3) Setup the different data to be sent (number of messages, optional TLVs,...), except do not set dot1agCfmMepTransmitLbmMessages. 4) Record the current values of dot1agCfmMepLbrIn, dot1agCfmMepLbrInOutOfOrder, and dot1agCfmMepLbrBadMsdu. 6) Set dot1agCfmMepTransmitLbmMessages to a non-zero value to initiate transmission of Loopback messages. 7) Check the value of dot1agCfmMepTransmitLbmResultOK to find out if the operation was successfully initiated or not. 8) Monitor the value of dot1agCfmMepTransmitLbmMessages. When it reaches 0, the last LBM has been transmitted. Wait an additional 5 seconds to ensure that all LBRs have been returned. 9) Compare dot1agCfmMepLbrIn, dot1agCfmMepLbrInOutOfOrder, and dot1agCfmMepLbrBadMsdu to their old values from step 4, above, to get the results of the test. 10) Change the dot1agCfmMepTransmitLbmStatus value back to true to allow other management entities to use the table. *LTM Managed objects The LTM Managed objects in the MEP table are used in a manner similar to that described for LBM transmission, above. Upon successfully initiating the transmission, the variables dot1agCfmMepTransmitLtmSeqNumber and dot1agCfmMepTransmitLtmEgressIdentifier return the information required to recover the results of the LTM from the dot1agCfmLtrTable. " REFERENCE "802.1ag clauses 12.14.7 and 19.2" ::= { dot1agCfmMep 1 } dot1agCfmMepEntry OBJECT-TYPE SYNTAX Dot1agCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP table entry" INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier } ::= { dot1agCfmMepTable 1 } Dot1agCfmMepEntry ::= SEQUENCE { dot1agCfmMepIdentifier Dot1agCfmMepId, dot1agCfmMepIfIndex InterfaceIndexOrZero, dot1agCfmMepDirection Dot1agCfmMpDirection, dot1agCfmMepPrimaryVid Unsigned32, dot1agCfmMepActive TruthValue, dot1agCfmMepFngState Dot1agCfmFngState, dot1agCfmMepCciEnabled TruthValue, dot1agCfmMepCcmLtmPriority Unsigned32, dot1agCfmMepMacAddress MacAddress, dot1agCfmMepLowPrDef Dot1agCfmLowestAlarmPri, dot1agCfmMepFngAlarmTime TimeInterval, dot1agCfmMepFngResetTime TimeInterval, dot1agCfmMepHighestPrDefect Dot1agCfmHighestDefectPri, dot1agCfmMepDefects Dot1agCfmMepDefects, dot1agCfmMepErrorCcmLastFailure OCTET STRING, dot1agCfmMepXconCcmLastFailure OCTET STRING, dot1agCfmMepCcmSequenceErrors Counter32, dot1agCfmMepCciSentCcms Counter32, dot1agCfmMepNextLbmTransId Unsigned32, dot1agCfmMepLbrIn Counter32, dot1agCfmMepLbrInOutOfOrder Counter32, dot1agCfmMepLbrBadMsdu Counter32, dot1agCfmMepLtmNextSeqNumber Unsigned32, dot1agCfmMepUnexpLtrIn Counter32, dot1agCfmMepLbrOut Counter32, dot1agCfmMepTransmitLbmStatus TruthValue, dot1agCfmMepTransmitLbmDestMacAddress MacAddress, dot1agCfmMepTransmitLbmDestMepId Dot1agCfmMepIdOrZero, dot1agCfmMepTransmitLbmDestIsMepId TruthValue, dot1agCfmMepTransmitLbmMessages Integer32, dot1agCfmMepTransmitLbmDataTlv OCTET STRING, dot1agCfmMepTransmitLbmVlanPriority Integer32, dot1agCfmMepTransmitLbmVlanDropEnable TruthValue, dot1agCfmMepTransmitLbmResultOK TruthValue, dot1agCfmMepTransmitLbmSeqNumber Unsigned32, dot1agCfmMepTransmitLtmStatus TruthValue, dot1agCfmMepTransmitLtmFlags BITS, dot1agCfmMepTransmitLtmTargetMacAddress MacAddress, dot1agCfmMepTransmitLtmTargetMepId Dot1agCfmMepIdOrZero, dot1agCfmMepTransmitLtmTargetIsMepId TruthValue, dot1agCfmMepTransmitLtmTtl Unsigned32, dot1agCfmMepTransmitLtmResult TruthValue, dot1agCfmMepTransmitLtmSeqNumber Unsigned32, dot1agCfmMepTransmitLtmEgressIdentifier OCTET STRING, dot1agCfmMepRowStatus RowStatus } dot1agCfmMepIdentifier OBJECT-TYPE SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance association End Point (3.18). MEP Identifier is also known as the MEPID. " REFERENCE "802.1ag clauses 3.18, 19.2 and 12.14.7" ::= { dot1agCfmMepEntry 1 } dot1agCfmMepIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL set this variable to 0. " REFERENCE "802.1ag clause 12.14.7.1.3:b" ::= { dot1agCfmMepEntry 2 } dot1agCfmMepDirection OBJECT-TYPE SYNTAX Dot1agCfmMpDirection MAX-ACCESS read-create STATUS current DESCRIPTION "The direction in which the MEP faces on the Bridge port." REFERENCE "802.1ag clauses 12.14.7.1.3:c and 19.2" ::= { dot1agCfmMepEntry 3 } dot1agCfmMepPrimaryVid OBJECT-TYPE SYNTAX Unsigned32(0..16777215) MAX-ACCESS read-create STATUS current DESCRIPTION "An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that either the Primary VID is that of the MEP's MA, or that the MEP's MA is associated with no VID." REFERENCE "802.1ag clauses 12.14.7.1.3:d" DEFVAL { 0 } ::= { dot1agCfmMepEntry 4 } dot1agCfmMepActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Administrative state of the MEP A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to function normally, and false that it is to cease functioning." REFERENCE "802.1ag clauses 12.14.7.1.3:e and 20.9.1" DEFVAL { false } ::= { dot1agCfmMepEntry 5 } dot1agCfmMepFngState OBJECT-TYPE SYNTAX Dot1agCfmFngState MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the MEP Fault Notification Generator State Machine. " REFERENCE "802.1ag clauses 12.14.7.1.3:f and 20.35" DEFVAL { fngReset } ::= { dot1agCfmMepEntry 6 } dot1agCfmMepCciEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If set to true, the MEP will generate CCM messages." REFERENCE "802.1ag clauses 12.14.7.1.3:g and 20.10.1" DEFVAL { false } ::= { dot1agCfmMepEntry 7 } dot1agCfmMepCcmLtmPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority value for CCMs and LTMs transmitted by the MEP. Default Value is the highest priority value allowed to pass through the bridge port for any of this MEPs VIDs. The management entity can obtain the default value for this variable from the priority regeneration table by extracting the highest priority value in this table on this MEPs bridge port. (1 is lowest, then 2, then 0, then 3-7). " REFERENCE "802.1ag clause 12.14.7.1.3:h" ::= { dot1agCfmMepEntry 8 } dot1agCfmMepMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the MEP." REFERENCE "802.1ag clause 12.14.7.1.3:i and 19.4" ::= { dot1agCfmMepEntry 9 } dot1agCfmMepLowPrDef OBJECT-TYPE SYNTAX Dot1agCfmLowestAlarmPri MAX-ACCESS read-create STATUS current DESCRIPTION "An integer value specifying the lowest priority defect that is allowed to generate fault alarm. " REFERENCE "802.1ag clause 12.14.7.1.3:k and 20.9.5 and Table 20-1" DEFVAL { macRemErrXcon } ::= { dot1agCfmMepEntry 10} dot1agCfmMepFngAlarmTime OBJECT-TYPE SYNTAX TimeInterval (250..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The time that defects MUST be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s). " REFERENCE "802.1ag clauses 12.14.7.1.3:l and 20.33.3" DEFVAL { 250 } ::= { dot1agCfmMepEntry 11 } dot1agCfmMepFngResetTime OBJECT-TYPE SYNTAX TimeInterval (250..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The time that defects MUST be absent before resetting a Fault Alarm (fngResetTime, 20.33.4) (default 10s). " REFERENCE "802.1ag clauses 12.14.7.1.3:m and 20.33.4" DEFVAL { 1000 } ::= { dot1agCfmMepEntry 12 } dot1agCfmMepHighestPrDefect OBJECT-TYPE SYNTAX Dot1agCfmHighestDefectPri MAX-ACCESS read-only STATUS current DESCRIPTION "The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state. " REFERENCE "802.1ag clause 12.14.7.1.3:n 20.33.9 and Table 21-1" ::= { dot1agCfmMepEntry 13 } dot1agCfmMepDefects OBJECT-TYPE SYNTAX Dot1agCfmMepDefects MAX-ACCESS read-only STATUS current DESCRIPTION "A vector of Boolean error conditions from Table 20-1, any of which may be true: DefRDICCM(0) DefMACstatus(1) DefRemoteCCM(2) DefErrorCCM(3) DefXconCCM(4) " REFERENCE ".1ag clauses 12.14.7.1.3:o, 12.14.7.1.3:p, 12.14.7.1.3:q, 12.14.7.1.3:r, 12.14.7.1.3:s, 20.21.3, 20.23.3, 20.33.5, 20.33.6, 20.33.7." ::= { dot1agCfmMepEntry 14 } dot1agCfmMepErrorCcmLastFailure OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..1522)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last-received CCM that triggered an DefErrorCCM fault." REFERENCE "802.1ag clauses 12.14.7.1.3:t and 20.21.2" ::= { dot1agCfmMepEntry 15 } dot1agCfmMepXconCcmLastFailure OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..1522)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last-received CCM that triggered a DefXconCCM fault." REFERENCE "802.1ag clauses 12.14.7.1.3:u and 20.23.2" ::= { dot1agCfmMepEntry 16 } dot1agCfmMepCcmSequenceErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of out-of-sequence CCMs received from all remote MEPs. " REFERENCE "802.1ag clauses 12.14.7.1.3:v and 20.16.12" ::= { dot1agCfmMepEntry 17 } dot1agCfmMepCciSentCcms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Continuity Check messages transmitted." REFERENCE "802.1ag clauses 12.14.7.1.3:w and 20.10.2" ::= { dot1agCfmMepEntry 18 } dot1agCfmMepNextLbmTransId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Next sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps around. " REFERENCE "802.1ag clauses 12.14.7.1.3:x and 20.28.2" ::= { dot1agCfmMepEntry 19 } dot1agCfmMepLbrIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of valid, in-order Loopback Replies received." REFERENCE "802.1ag clause 12.14.7.1.3:y and 20.31.1" ::= { dot1agCfmMepEntry 20 } dot1agCfmMepLbrInOutOfOrder OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of valid, out-of-order Loopback Replies received. " REFERENCE "802.1ag clause 12.14.7.1.3:z and 20.31.1" ::= { dot1agCfmMepEntry 21 } dot1agCfmMepLbrBadMsdu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM (20.2.3). " REFERENCE "802.1ag clause 12.14.7.1.3:aa 20.2.3" ::= { dot1agCfmMepEntry 22} dot1agCfmMepLtmNextSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Next transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps around. " REFERENCE "802.1ag clause 12.14.7.1.3:ab and 20.36.1" ::= { dot1agCfmMepEntry 23 } dot1agCfmMepUnexpLtrIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unexpected LTRs received (20.39.1). " REFERENCE "802.1ag clause 12.14.7.1.3:ac 20.39.1" ::= { dot1agCfmMepEntry 24 } dot1agCfmMepLbrOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Loopback Replies transmitted." REFERENCE "802.1ag clause 12.14.7.1.3:ad and 20.26.2" ::= { dot1agCfmMepEntry 25 } dot1agCfmMepTransmitLbmStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A Boolean flag set to true by the bridge port to indicate that another LBM may be transmitted. Reset to false by the MEP Loopback Initiator State Machine." DEFVAL { true } ::= { dot1agCfmMepEntry 26 } dot1agCfmMepTransmitLbmDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column dot1agCfmMepTransmitLbmDestIsMepId is 'false'. " REFERENCE "802.1ag clause 12.14.7.3.2:b" ::= { dot1agCfmMepEntry 27 } dot1agCfmMepTransmitLbmDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used if the value of the column dot1agCfmMepTransmitLbmDestIsMepId is 'true'. " REFERENCE "802.1ag clause 12.14.7.3.2:b" ::= { dot1agCfmMepEntry 28 } dot1agCfmMepTransmitLbmDestIsMepId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "True indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. " REFERENCE "802.1ag clause 12.14.7.3.2:b" ::= {dot1agCfmMepEntry 29 } dot1agCfmMepTransmitLbmMessages OBJECT-TYPE SYNTAX Integer32(1..1024) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of Loopback messages to be transmitted." REFERENCE "802.1ag clause 12.14.7.3.2:c" DEFVAL { 1 } ::= {dot1agCfmMepEntry 30 } dot1agCfmMepTransmitLbmDataTlv OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1500)) MAX-ACCESS read-create STATUS current DESCRIPTION "An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. " REFERENCE "802.1ag clause 12.14.7.3.2:d" ::= { dot1agCfmMepEntry 31 } dot1agCfmMepTransmitLbmVlanPriority OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority. " REFERENCE "802.1ag clause 12.14.7.3.2:e" ::= { dot1agCfmMepEntry 32 } dot1agCfmMepTransmitLbmVlanDropEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad. " REFERENCE "802.1ag clause 12.14.7.3.2:e" DEFVAL { true } ::= { dot1agCfmMepEntry 33 } dot1agCfmMepTransmitLbmResultOK OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sent. " REFERENCE "802.1ag clause 12.14.7.3.3:a" DEFVAL { true } ::= { dot1agCfmMepEntry 34 } dot1agCfmMepTransmitLbmSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Loopback Transaction Identifier (dot1agCfmMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined if dot1agCfmMepTransmitLbmResultOK is false. " REFERENCE "802.1ag clause 12.14.7.3.3:a" ::= { dot1agCfmMepEntry 35 } dot1agCfmMepTransmitLtmStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. Reset to false by the MEP Linktrace Initiator State Machine." DEFVAL { true } ::= { dot1agCfmMepEntry 36 } dot1agCfmMepTransmitLtmFlags OBJECT-TYPE SYNTAX BITS { useFDBonly (0) } MAX-ACCESS read-create STATUS current DESCRIPTION "The flags field for LTMs transmitted by the MEP." REFERENCE "802.1ag clause 12.14.7.4.2:b and 20.37.1" DEFVAL { {useFDBonly } } ::= { dot1agCfmMepEntry 37 } dot1agCfmMepTransmitLtmTargetMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column dot1agCfmMepTransmitLtmTargetIsMepId is 'false'. " REFERENCE "802.1ag clause 12.14.7.4.2:c" ::= { dot1agCfmMepEntry 38 } dot1agCfmMepTransmitLtmTargetMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column dot1agCfmMepTransmitLtmTargetIsMepId is 'true'. " REFERENCE "802.1ag clause 12.14.7.4.2:c" ::= { dot1agCfmMepEntry 39 } dot1agCfmMepTransmitLtmTargetIsMepId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. " REFERENCE "802.1ag clause 12.14.7.4.2:c" ::= { dot1agCfmMepEntry 40 } dot1agCfmMepTransmitLtmTtl OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace Responder that handles the LTM. The value returned in the LTR is one less than that received in the LTM. If the LTM TTL is 0 or 1, the LTM is not forwarded to the next hop, and if 0, no LTR is generated. " REFERENCE "802.1ag clause 12.14.7.4.2:d and 21.8.4" DEFVAL {64} ::= { dot1agCfmMepEntry 41 } dot1agCfmMepTransmitLtmResult OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent" REFERENCE "802.1ag clause 12.14.7.4.3:a" DEFVAL { true } ::= { dot1agCfmMepEntry 42 } dot1agCfmMepTransmitLtmSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The LTM Transaction Identifier (dot1agCfmMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if dot1agCfmMepTransmitLtmResult is false. " REFERENCE "802.1ag clause 12.14.7.4.3:a" ::= { dot1agCfmMepEntry 43 } dot1agCfmMepTransmitLtmEgressIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Identifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-order six octets contain a 48-bit IEEE MAC address unique to the system in which the MEP Linktrace Initiator or Linktrace Responder resides. The high-order two octets contain a value sufficient to uniquely identify the MEP Linktrace Initiator or Linktrace Responder within that system. For most Bridges, the address of any MAC attached to the Bridge will suffice for the low-order six octets, and 0 for the high-order octets. In some situations, e.g., if multiple virtual Bridges utilizing emulated LANs are implemented in a single physical system, the high-order two octets can be used to differentiate among the transmitting entities. The value returned is undefined if dot1agCfmMepTransmitLtmResult is false. " REFERENCE "802.1ag clause 12.14.7.4.3:b and 21.8.8" ::= { dot1agCfmMepEntry 44 } dot1agCfmMepRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. " ::= { dot1agCfmMepEntry 45 } -- ****************************************************************** -- The Linktrace Reply Table -- ****************************************************************** dot1agCfmLtrTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agCfmLtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table extends the MEP table and contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. SNMP SMI does not allow to state in a MIB that an object in a table is an array. The solution is to take the index (or indices) of the first table and add one or more indices. " REFERENCE "802.1ag clause 12.14.7.5" ::= { dot1agCfmMep 2 } dot1agCfmLtrEntry OBJECT-TYPE SYNTAX Dot1agCfmLtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Linktrace Reply table entry." INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier, dot1agCfmLtrSeqNumber, dot1agCfmLtrReceiveOrder } ::= { dot1agCfmLtrTable 1 } Dot1agCfmLtrEntry ::= SEQUENCE { dot1agCfmLtrSeqNumber Unsigned32, dot1agCfmLtrReceiveOrder Unsigned32, dot1agCfmLtrTtl Unsigned32, dot1agCfmLtrForwarded TruthValue, dot1agCfmLtrTerminalMep TruthValue, dot1agCfmLtrLastEgressIdentifier OCTET STRING, dot1agCfmLtrNextEgressIdentifier OCTET STRING, dot1agCfmLtrRelay Dot1agCfmRelayActionFieldValue, dot1agCfmLtrChassisIdSubtype LldpChassisIdSubtype, dot1agCfmLtrChassisId LldpChassisId, dot1agCfmLtrManAddressDomain TDomain, dot1agCfmLtrManAddress TAddress, dot1agCfmLtrIngress Dot1agCfmIngressActionFieldValue, dot1agCfmLtrIngressMac MacAddress, dot1agCfmLtrIngressPortIdSubtype LldpPortIdSubtype, dot1agCfmLtrIngressPortId LldpPortId, dot1agCfmLtrEgress Dot1agCfmEgressActionFieldValue, dot1agCfmLtrEgressMac MacAddress, dot1agCfmLtrEgressPortIdSubtype LldpPortIdSubtype, dot1agCfmLtrEgressPortId LldpPortId, dot1agCfmLtrOrganizationSpecificTlv OCTET STRING } dot1agCfmLtrSeqNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. " REFERENCE "802.1ag clause 12.14.7.5.2:b" ::= { dot1agCfmLtrEntry 1} dot1agCfmLtrReceiveOrder OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. dot1agCfmLtrReceiveOrder are assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs. " REFERENCE "802.1ag clause 12.14.7.5.2:c" ::= { dot1agCfmLtrEntry 2 } dot1agCfmLtrTtl OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "TTL field value for a returned LTR." REFERENCE "802.1ag clause 12.14.7.5 and 20.36.2.2" ::= { dot1agCfmLtrEntry 3 } dot1agCfmLtrForwarded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. " REFERENCE "802.1ag clauses 12.14.7.5.3:c and 20.36.2.1" ::= { dot1agCfmLtrEntry 4 } dot1agCfmLtrTerminalMep OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. " REFERENCE "802.1ag clauses 12.14.7.5.3:d and 20.36.2.1" ::= { dot1agCfmLtrEntry 5 } dot1agCfmLtrLastEgressIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace Initiator that originated, or the Linktrace Responder that forwarded, the LTM to which this LTR is the response. This is the same value as the Egress Identifier TLV of that LTM. " REFERENCE "802.1ag clauses 12.14.7.5.3:e and 20.36.2.3" ::= { dot1agCfmLtrEntry 6 } dot1agCfmLtrNextEgressIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Responder that transmitted this LTR, and can forward the LTM to the next hop. This is the same value as the Egress Identifier TLV of the forwarded LTM, if any. If the FwdYes bit of the Flags field is false, the contents of this field are undefined, i.e., any value can be transmitted, and the field is ignored by the receiver. " REFERENCE "802.1ag clauses 12.14.7.5.3:f and 20.36.2.4" ::= { dot1agCfmLtrEntry 7 } dot1agCfmLtrRelay OBJECT-TYPE SYNTAX Dot1agCfmRelayActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "Value returned in the Relay Action field." REFERENCE "802.1ag clauses 12.14.7.5.3:g and 20.36.2.5" ::= { dot1agCfmLtrEntry 8 } dot1agCfmLtrChassisIdSubtype OBJECT-TYPE SYNTAX LldpChassisIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the format of the Chassis ID returned in the Sender ID TLV of the LTR, if any. This value is meaningless if the dot1agCfmLtrChassisId has a length of 0." REFERENCE "802.1ag clauses 12.14.7.5.3:h and 21.5.3.2" ::= { dot1agCfmLtrEntry 9 } dot1agCfmLtrChassisId OBJECT-TYPE SYNTAX LldpChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "The Chassis ID returned in the Sender ID TLV of the LTR, if any. The format of this object is determined by the value of the dot1agCfmLtrChassisIdSubtype object. " REFERENCE "802.1ag clauses 12.14.7.5.3:i and 21.5.3.3" ::= { dot1agCfmLtrEntry 10 } dot1agCfmLtrManAddressDomain OBJECT-TYPE SYNTAX TDomain MAX-ACCESS read-only STATUS current DESCRIPTION "The TDomain that identifies the type and format of the related dot1agCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the LTR. Received in the LTR Sender ID TLV from that system. Typical values will be one of (not all inclusive) list: snmpUDPDomain (from SNMPv2-TM, RFC3417) snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789) The value 'zeroDotZero' (from RFC2578) indicates 'no management address was present in the LTR', in which case the related object dot1agCfmMepDbManAddress MUST have a zero-length OCTET STRING as a value. " REFERENCE "802.1ag clauses 12.14.7.5.3:j, 21.5.3.5, 21.9.6" ::= { dot1agCfmLtrEntry 11 } dot1agCfmLtrManAddress OBJECT-TYPE SYNTAX TAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related object dot1agCfmLtrManAddressDomain contains the value 'zeroDotZero', this object dot1agCfmLtrManAddress MUST have a zero-length OCTET STRING as a value. " REFERENCE "802.1ag clauses 12.14.7.5.3:j, 21.5.3.7, 21.9.6" ::= { dot1agCfmLtrEntry 12 } dot1agCfmLtrIngress OBJECT-TYPE SYNTAX Dot1agCfmIngressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(0) indicates that no Reply Ingress TLV was returned in the LTM." REFERENCE "802.1ag clauses 12.14.7.5.3:k and 20.36.2.6" ::= { dot1agCfmLtrEntry 13 } dot1agCfmLtrIngressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address returned in the ingress MAC address field. If the dot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless." REFERENCE "802.1ag clauses 12.14.7.5.3:l and 20.36.2.7" ::= { dot1agCfmLtrEntry 14 } dot1agCfmLtrIngressPortIdSubtype OBJECT-TYPE SYNTAX LldpPortIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "Format of the Ingress Port ID. If the dot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless." REFERENCE "802.1ag clauses 12.14.7.5.3:m and 20.36.2.8" ::= { dot1agCfmLtrEntry 15 } dot1agCfmLtrIngressPortId OBJECT-TYPE SYNTAX LldpPortId MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress Port ID. The format of this object is determined by the value of the dot1agCfmLtrIngressPortIdSubtype object. If the dot1agCfmLtrIngress object contains the value ingNoTlv(0), then the contents of this object are meaningless." REFERENCE "802.1ag clauses 12.14.7.5.3:n and 20.36.2.9" ::= { dot1agCfmLtrEntry 16 } dot1agCfmLtrEgress OBJECT-TYPE SYNTAX Dot1agCfmEgressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value returned in the Egress Action Field of the LTM. The value egrNoTlv(0) indicates that no Reply Egress TLV was returned in the LTM." REFERENCE "802.1ag clauses 12.14.7.5.3:o and 20.36.2.10" ::= { dot1agCfmLtrEntry 17 } dot1agCfmLtrEgressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address returned in the egress MAC address field. If the dot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless." REFERENCE "802.1ag clauses 12.14.7.5.3:p and 20.36.2.11" ::= { dot1agCfmLtrEntry 18 } dot1agCfmLtrEgressPortIdSubtype OBJECT-TYPE SYNTAX LldpPortIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "Format of the egress Port ID. If the dot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless." REFERENCE "802.1ag clauses 12.14.7.5.3:q and 20.36.2.12" ::= { dot1agCfmLtrEntry 19 } dot1agCfmLtrEgressPortId OBJECT-TYPE SYNTAX LldpPortId MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Port ID. The format of this object is determined by the value of the dot1agCfmLtrEgressPortIdSubtype object. If the dot1agCfmLtrEgress object contains the value egrNoTlv(0), then the contents of this object are meaningless." REFERENCE "802.1ag clauses 12.14.7.5.3:r and 20.36.2.13" ::= { dot1agCfmLtrEntry 20 } dot1agCfmLtrOrganizationSpecificTlv OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0|4..1500)) MAX-ACCESS read-only STATUS current DESCRIPTION "All Organization specific TLVs returned in the LTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together." REFERENCE "802.1ag clauses 12.14.7.5.3:s, 21.5.2" ::= { dot1agCfmLtrEntry 21 } -- ****************************************************************** -- The MEP Database Table -- ****************************************************************** dot1agCfmMepDbTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agCfmMepDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP Database. A database, maintained by every MEP, that maintains received information about other MEPs in the Maintenance Domain. The SMI does not allow to state in a MIB that an object in a table is an array. The solution is to take the index (or indices) of the first table and add one or more indices. " REFERENCE "802.1ag clause 19.2.15" ::= { dot1agCfmMep 3 } dot1agCfmMepDbEntry OBJECT-TYPE SYNTAX Dot1agCfmMepDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP Database table entry." INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier, dot1agCfmMepDbRMepIdentifier } ::= { dot1agCfmMepDbTable 1 } Dot1agCfmMepDbEntry ::= SEQUENCE { dot1agCfmMepDbRMepIdentifier Dot1agCfmMepId, dot1agCfmMepDbRMepState Dot1agCfmRemoteMepState, dot1agCfmMepDbRMepFailedOkTime TimeStamp, dot1agCfmMepDbMacAddress MacAddress, dot1agCfmMepDbRdi TruthValue, dot1agCfmMepDbPortStatusTlv Dot1agCfmPortStatus, dot1agCfmMepDbInterfaceStatusTlv Dot1agCfmInterfaceStatus, dot1agCfmMepDbChassisIdSubtype LldpChassisIdSubtype, dot1agCfmMepDbChassisId LldpChassisId, dot1agCfmMepDbManAddressDomain TDomain, dot1agCfmMepDbManAddress TAddress } dot1agCfmMepDbRMepIdentifier OBJECT-TYPE SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maintenance association End Point Identifier of a remote MEP whose information from the MEP Database is to be returned. " REFERENCE "802.1ag clause 12.14.7.6.2:b" ::= { dot1agCfmMepDbEntry 1 } dot1agCfmMepDbRMepState OBJECT-TYPE SYNTAX Dot1agCfmRemoteMepState MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of the remote MEP IFF State machines." REFERENCE "802.1ag clause 12.14.7.6.3:b and 20.22" ::= { dot1agCfmMepDbEntry 2} dot1agCfmMepDbRMepFailedOkTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time (SysUpTime) at which the IFF Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state. " REFERENCE "802.1ag clause 12.14.7.6.3:c" ::= { dot1agCfmMepDbEntry 3 } dot1agCfmMepDbMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the remote MEP." REFERENCE "802.1ag clause 12.14.7.6.3:d and 20.19.7" ::= { dot1agCfmMepDbEntry 4 } dot1agCfmMepDbRdi OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received. " REFERENCE "802.1ag clauses 12.14.7.6.3:e and 20.19.2" ::= { dot1agCfmMepDbEntry 5 } dot1agCfmMepDbPortStatusTlv OBJECT-TYPE SYNTAX Dot1agCfmPortStatus MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value psNoPortStateTLV indicating either no CCM has been received, or that nor port status TLV was received in the last CCM. " REFERENCE "802.1ag clause 12.14.7.6.3:f and 20.19.3" DEFVAL { psNoPortStateTLV } ::= { dot1agCfmMepDbEntry 6} dot1agCfmMepDbInterfaceStatusTlv OBJECT-TYPE SYNTAX Dot1agCfmInterfaceStatus MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerated value of the Interface status TLV received in the last CCM from the remote MEP or the default value isNoInterfaceStatus TLV indicating either no CCM has been received, or that no interface status TLV was received in the last CCM. " REFERENCE "802.1ag clause 12.14.7.6.3:g and 20.19.4" DEFVAL { isNoInterfaceStatusTLV } ::= { dot1agCfmMepDbEntry 7} dot1agCfmMepDbChassisIdSubtype OBJECT-TYPE SYNTAX LldpChassisIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the format of the Chassis ID received in the last CCM." REFERENCE "802.1ag clauses 12.14.7.6.3:h and 21.5.3.2" ::= { dot1agCfmMepDbEntry 8 } dot1agCfmMepDbChassisId OBJECT-TYPE SYNTAX LldpChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "The Chassis ID. The format of this object is determined by the value of the dot1agCfmLtrChassisIdSubtype object. " REFERENCE "802.1ag clauses 12.14.7.6.3:h and 21.5.3.3" ::= { dot1agCfmMepDbEntry 9 } dot1agCfmMepDbManAddressDomain OBJECT-TYPE SYNTAX TDomain MAX-ACCESS read-only STATUS current DESCRIPTION "The TDomain that identifies the type and format of the related dot1agCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the CCM. Received in the CCM Sender ID TLV from that system. Typical values will be one of (not all inclusive) list: snmpUDPDomain (from SNMPv2-TM, RFC3417) snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789) The value 'zeroDotZero' (from RFC2578) indicates 'no management address was present in the LTR', in which case the related object dot1agCfmMepDbManAddress MUST have a zero-length OCTET STRING as a value. " REFERENCE "802.1ag clauses 12.14.7.6.3:h, 21.5.3.5, 21.6.7" ::= { dot1agCfmMepDbEntry 10 } dot1agCfmMepDbManAddress OBJECT-TYPE SYNTAX TAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related object dot1agCfmMepDbManAddressDomain contains the value 'zeroDotZero', this object dot1agCfmMepDbManAddress MUST have a zero-length OCTET STRING as a value. " REFERENCE "802.1ag clauses 12.14.7.6.3:h, 21.5.3.7, 21.6.7" ::= { dot1agCfmMepDbEntry 11 } -- ****************************************************************** -- PBB specific tables -- ****************************************************************** -- The goal of this section is to provide CFM management capability -- for the new I-SID capable shim (Backbone Service Instance -- Multiplex Entity (6.18)) created in 802.1ah. -- ****************************************************************** -- The PBB CFM Stack Table -- ****************************************************************** dot1agPbbCfmStackTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agPbbCfmStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is one CFM Stack table per bridge. It permits the retrieval of information about the Maintenance Points configured on any given interface. " REFERENCE "802.1ag clauses 12.14.2" ::= { dot1agCfmStack 2 } dot1agPbbCfmStackEntry OBJECT-TYPE SYNTAX Dot1agPbbCfmStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Stack table entry" INDEX { dot1agPbbCfmStackifIndex, dot1agPbbCfmStackServiceSelectorType, dot1agPbbCfmStackServiceSelectorOrNone, dot1agPbbCfmStackMdLevel, dot1agPbbCfmStackDirection } ::= { dot1agPbbCfmStackTable 1 } Dot1agPbbCfmStackEntry ::= SEQUENCE { dot1agPbbCfmStackifIndex InterfaceIndex, dot1agPbbCfmStackServiceSelectorType IEEE8021ServiceSelectorTypeTC, dot1agPbbCfmStackServiceSelectorOrNone IEEE8021ServiceSelectorValueOrNoneTC, dot1agPbbCfmStackMdLevel Dot1agCfmMDLevel, dot1agPbbCfmStackDirection Dot1agCfmMpDirection, dot1agPbbCfmStackMdIndex Unsigned32, dot1agPbbCfmStackMaIndex Unsigned32, dot1agPbbCfmStackMepId Dot1agCfmMepIdOrZero, dot1agPbbCfmStackMacAddress MacAddress } dot1agPbbCfmStackifIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the Bridge Port or aggregated port on which MEPs or MHFs might be configured. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable, and rearrange the dot1agPbbCfmStackTable, so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL delete all entries in the dot1agPbbCfmStackTable with the interface index. " REFERENCE "802.1ag clause 12.14.2.1.2:a" ::= { dot1agPbbCfmStackEntry 1 } dot1agPbbCfmStackServiceSelectorType OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorTypeTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of the Service Selector identifier indicated by dot1agPbbCfmStackServiceSelectorOrNone. See textual convention IEEE8021ServiceSelectorTypeTC for details. " REFERENCE "802.1ag clauses 12.14.2.1.2:d, 22.1.7" ::= { dot1agPbbCfmStackEntry 2 } dot1agPbbCfmStackServiceSelectorOrNone OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorValueOrNoneTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "Service Selector identifier to which the MP is attached, or 0, if none. See textual convention IEEE8021ServiceSelectorValueTC for details. " REFERENCE "802.1ag clauses 12.14.2.1.2:d, 22.1.7" ::= { dot1agPbbCfmStackEntry 3 } dot1agPbbCfmStackMdLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevel MAX-ACCESS not-accessible STATUS current DESCRIPTION "MD Level of the Maintenance Point." REFERENCE "802.1ag clause 12.14.2.1.2:b" ::= { dot1agPbbCfmStackEntry 4 } dot1agPbbCfmStackDirection OBJECT-TYPE SYNTAX Dot1agCfmMpDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "Direction in which the MP faces on the Bridge Port" REFERENCE "802.1ag clause 12.14.2.1.2:c" ::= { dot1agPbbCfmStackEntry 5 } dot1agPbbCfmStackMdIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the Maintenance Domain in the dot1agPbbCfmMdTable to which the MP is associated, or 0, if none." REFERENCE "802.1ag clause 12.14.2.1.3:b" ::= { dot1agPbbCfmStackEntry 6 } dot1agPbbCfmStackMaIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the MA in the dot1agPbbCfmMaNetTable and dot1agPbbCfmMaCompTable to which the MP is associated, or 0, if none." REFERENCE "802.1ag clause 12.14.2.1.3:c" ::= { dot1agPbbCfmStackEntry 7 } dot1agPbbCfmStackMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "If an MEP is configured, the MEPID, else 0" REFERENCE "802.1ag clause 12.14.2.1.3:d" ::= { dot1agPbbCfmStackEntry 8 } dot1agPbbCfmStackMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address of the MP." REFERENCE "802.1ag clause 12.14.2.1.3:e" ::= { dot1agPbbCfmStackEntry 9 } -- ****************************************************************** -- The PBB CFM VLAN Table -- ****************************************************************** dot1agPbbCfmVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agPbbCfmVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the association of VIDs into VLANs. There is an entry in this table, for each component of the bridge, for each VID that is: a) a VID belonging to a VLAN associated with more than one VID; and b) not the Primary VLAN of that VID. The entry in this table contains the Primary VID of the VLAN. By default, this table is empty, meaning that every VID is the Primary VID of a single-VID VLAN. VLANs that are associated with only one VID SHOULD NOT have an entry in this table. The writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clauses 12.14.3.1.3:a, 12.14.3.2.2:a, 12.14.5.3.2:c, 12.14.6.1.3:b, 22.1.5." ::= { dot1agCfmVlan 2 } dot1agPbbCfmVlanEntry OBJECT-TYPE SYNTAX Dot1agPbbCfmVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN table entry." INDEX { dot1agPbbCfmVlanComponentId, dot1agPbbCfmVlanSelector} ::= { dot1agPbbCfmVlanTable 1 } Dot1agPbbCfmVlanEntry ::= SEQUENCE { dot1agPbbCfmVlanComponentId IEEE8021PbbComponentIdentifierTC, dot1agPbbCfmVlanSelector IEEE8021ServiceSelectorValueTC, dot1agPbbCfmVlanPrimarySelector IEEE8021ServiceSelectorValueTC, dot1agPbbCfmVlanRowStatus RowStatus } dot1agPbbCfmVlanComponentId OBJECT-TYPE SYNTAX IEEE8021PbbComponentIdentifierTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bridge component within the system to which the information in this dot1agPbbCfmVlanEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. " REFERENCE "802.1ag clause 17.5" ::= { dot1agPbbCfmVlanEntry 1 } dot1agPbbCfmVlanSelector OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorValueTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a service ID belonging to a service that is associated with more than one Service Selector identifiers, and this is not the Primary Service ID of the service. The type of this Service Selector is the same as the primary Service Selector's type defined by dot1agPbbCfmMaCompPrimarySelectorType in the dot1agPbbCfmMaCompTable. " ::= { dot1agPbbCfmVlanEntry 3 } dot1agPbbCfmVlanPrimarySelector OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorValueTC MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Primary Service selector for a Service that is associated with more than one Service Selector identifiers. This value MUST not equal the value of dot1agPbbCfmVlanSelector. The type of this Service Selector is the same as the primary Service Selector's type defined by dot1agPbbCfmMaCompPrimarySelectorType in the dot1agPbbCfmMaCompTable. " REFERENCE "802.1ag clauses" ::= { dot1agPbbCfmVlanEntry 5 } dot1agPbbCfmVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. " ::= { dot1agPbbCfmVlanEntry 6 } -- ******************************************************************* -- The PBB CFM Default MD Level Table -- ******************************************************************* dot1agPbbCfmDefaultMdTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agPbbCfmDefaultMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each bridge component, the Default MD Level Managed Object controls MHF creation for VIDs that are not attached to a specific Maintenance Association Managed Object, and Sender ID TLV transmission by those MHFs. For each Bridge Port, and for each VLAN ID whose data can pass through that Bridge Port, an entry in this table is used by the algorithm in subclause 22.2.3 only if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as this table's entry, and on which MA an Up MEP is defined. If there exists such an MA, that MA's objects are used by the algorithm in subclause 22.2.3 in place of this table entry's objects. The agent maintains the value of dot1agPbbCfmDefaultMdStatus to indicate whether this entry is overridden by an MA. When first initialized, the agent creates this table automatically with entries for all VLAN IDs, with the default values specified for each object. After this initialization, the writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 12.14.3" ::= { dot1agCfmDefaultMd 5 } dot1agPbbCfmDefaultMdEntry OBJECT-TYPE SYNTAX Dot1agPbbCfmDefaultMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Default MD Level table entry." INDEX { dot1agPbbCfmDefaultMdComponentId, dot1agPbbCfmDefaultMdPrimarySelectorType, dot1agPbbCfmDefaultMdPrimarySelector} ::= { dot1agPbbCfmDefaultMdTable 1 } Dot1agPbbCfmDefaultMdEntry ::= SEQUENCE { dot1agPbbCfmDefaultMdComponentId IEEE8021PbbComponentIdentifierTC, dot1agPbbCfmDefaultMdPrimarySelectorType IEEE8021ServiceSelectorTypeTC, dot1agPbbCfmDefaultMdPrimarySelector IEEE8021ServiceSelectorValueTC, dot1agPbbCfmDefaultMdStatus TruthValue, dot1agPbbCfmDefaultMdLevel Dot1agCfmMDLevelOrNone, dot1agPbbCfmDefaultMdMhfCreation Dot1agCfmMhfCreation, dot1agPbbCfmDefaultMdIdPermission Dot1agCfmIdPermission } dot1agPbbCfmDefaultMdComponentId OBJECT-TYPE SYNTAX IEEE8021PbbComponentIdentifierTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bridge component within the system to which the information in this dot1agPbbCfmDefaultMdEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. " REFERENCE "802.1ag clause 17.5" ::= { dot1agPbbCfmDefaultMdEntry 1 } dot1agPbbCfmDefaultMdPrimarySelectorType OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorTypeTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of the Primary Service Selector identifier indicated by dot1agPbbCfmDefaultMdPrimarySelector. See textual convention IEEE8021ServiceSelectorTypeTC for details. " ::= { dot1agPbbCfmDefaultMdEntry 2 } dot1agPbbCfmDefaultMdPrimarySelector OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorValueTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "Primary Service Selector identifier of a Service Instance with no MA configured. See IEEE8021ServiceSelectorValueTC for details. " ::= { dot1agPbbCfmDefaultMdEntry 3 } dot1agPbbCfmDefaultMdStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "State of this Default MD Level table entry. True if there is no entry in the Maintenance Association table defining an MA for the same VLAN ID and MD Level as this table's entry, and on which MA an Up MEP is defined, else false. " REFERENCE "802.1ag clause 12.14.3.1.3:b" ::= { dot1agPbbCfmDefaultMdEntry 4 } dot1agPbbCfmDefaultMdLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevelOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for the VLAN to which this entry's objects apply. If this object has the value -1, the MD Level for MHF creation for this VLAN is controlled by dot1agPbbCfmDefaultMdDefLevel. " REFERENCE "802.1ag clause 12.14.3.1.3:c, 12.14.3.2.2:b" DEFVAL {-1} ::= { dot1agPbbCfmDefaultMdEntry 5 } dot1agPbbCfmDefaultMdMhfCreation OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation MAX-ACCESS read-write STATUS current DESCRIPTION "A value indicating if the Management entity can create MHFs (MIP Half Function) for this VID at this MD Level. If this object has the value defMHFdefer, MHF creation for this VLAN is controlled by dot1agPbbCfmDefaultMdDefMhfCreation. The value of this variable is meaningless if the values of dot1agPbbCfmDefaultMdStatus is false. " REFERENCE "802.1ag clause 12.14.3.1.3:d" DEFVAL {defMHFdefer} ::= { dot1agPbbCfmDefaultMdEntry 6 } dot1agPbbCfmDefaultMdIdPermission OBJECT-TYPE SYNTAX Dot1agCfmIdPermission MAX-ACCESS read-write STATUS current DESCRIPTION "Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain. If this object has the value sendIdDefer, Sender ID TLV transmission for this VLAN is controlled by dot1agPbbCfmDefaultMdDefIdPermission. The value of this variable is meaningless if the values of dot1agPbbCfmDefaultMdStatus is false. " REFERENCE "802.1ag clause 12.14.3.1.3:e" DEFVAL { sendIdDefer } ::= { dot1agPbbCfmDefaultMdEntry 7 } -- ****************************************************************** -- The PBB CFM Configuration Error List Table -- ****************************************************************** dot1agPbbCfmConfigErrorListTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agPbbCfmConfigErrorListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PBB CFM Configuration Error List table provides a list of Interfaces and VIDs that are incorrectly configured. " REFERENCE "802.1ag clause 12.14.4" ::= {dot1agCfmConfigErrorList 2} dot1agPbbCfmConfigErrorListEntry OBJECT-TYPE SYNTAX Dot1agPbbCfmConfigErrorListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Config Error List Table entry" INDEX { dot1agPbbCfmConfigErrorListSelectorType, dot1agPbbCfmConfigErrorListSelector, dot1agPbbCfmConfigErrorListIfIndex } ::= { dot1agPbbCfmConfigErrorListTable 1} Dot1agPbbCfmConfigErrorListEntry ::= SEQUENCE { dot1agPbbCfmConfigErrorListSelectorType IEEE8021ServiceSelectorTypeTC, dot1agPbbCfmConfigErrorListSelector IEEE8021ServiceSelectorValueTC, dot1agPbbCfmConfigErrorListIfIndex InterfaceIndex, dot1agPbbCfmConfigErrorListErrorType Dot1agCfmConfigErrors } dot1agPbbCfmConfigErrorListSelectorType OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorTypeTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of the Service Selector identifier indicated by dot1agPbbCfmConfigErrorListSelector. See textual convention IEEE8021ServiceSelectorTypeTC for details. " REFERENCE "802.1ag Clause 12.14.4.1.2:a" ::= { dot1agPbbCfmConfigErrorListEntry 1 } dot1agPbbCfmConfigErrorListSelector OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorValueTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Service Selector Identifier of the Service with interfaces in error. See IEEE8021ServiceSelectorValueTC for details. " REFERENCE "802.1ag Clause 12.14.4.1.2:a" ::= { dot1agPbbCfmConfigErrorListEntry 2 } dot1agPbbCfmConfigErrorListIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is the IfIndex of the interface. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL delete any entries in dot1agPbbCfmConfigErrorListTable indexed by that InterfaceIndex value. " REFERENCE "802.1ag clause 12.14.4.1.2:b" ::= { dot1agPbbCfmConfigErrorListEntry 3 } dot1agPbbCfmConfigErrorListErrorType OBJECT-TYPE SYNTAX Dot1agCfmConfigErrors MAX-ACCESS read-only STATUS current DESCRIPTION "A vector of Boolean error conditions from 22.2.4, any of which may be true: 0) CFMleak; 1) ConflictingVids; 2) ExcessiveLevels; 3) OverlappedLevels. " REFERENCE "802.1ag clause 12.14.4.1.3:b" ::= { dot1agPbbCfmConfigErrorListEntry 4 } -- ****************************************************************** -- The PBB CFM Maintenance Association (MA) Component Table -- ****************************************************************** dot1agPbbCfmMaCompTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1agPbbCfmMaCompEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the part of the complete MA table that is variable across the Bridges in a Maintenance Domain, or across the components of a single Bridge. That part of the MA table that is constant across the Bridges and their components in a Maintenance Domain is contained in the dot1agPbbCfmMaNetTable. This table uses three indices, first index is the IEEE8021PbbComponentIdentifierTC that identifies the component within the Bridge for which the information in the dot1agPbbCfmMaCompEntry applies. The second is the index of the Maintenance Domain table. The third index is the same as the index of the dot1agPbbCfmMaNetEntry for the same MA. The writable objects in this table need to be persistent upon reboot or restart of a device. " REFERENCE "802.1ag clause 18.2" ::= { dot1agCfmMa 4 } dot1agPbbCfmMaCompEntry OBJECT-TYPE SYNTAX Dot1agPbbCfmMaCompEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MA table entry." INDEX {dot1agPbbCfmMaComponentId, dot1agCfmMdIndex, dot1agCfmMaIndex } ::= { dot1agPbbCfmMaCompTable 1 } Dot1agPbbCfmMaCompEntry ::= SEQUENCE { dot1agPbbCfmMaComponentId IEEE8021PbbComponentIdentifierTC, dot1agPbbCfmMaCompPrimarySelectorType IEEE8021ServiceSelectorTypeTC, dot1agPbbCfmMaCompPrimarySelectorOrNone IEEE8021ServiceSelectorValueOrNoneTC, dot1agPbbCfmMaCompMhfCreation Dot1agCfmMhfCreation, dot1agPbbCfmMaCompIdPermission Dot1agCfmIdPermission, dot1agPbbCfmMaCompNumberOfVids Unsigned32, dot1agPbbCfmMaCompRowStatus RowStatus } dot1agPbbCfmMaComponentId OBJECT-TYPE SYNTAX IEEE8021PbbComponentIdentifierTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bridge component within the system to which the information in this dot1agPbbCfmMaCompEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. " REFERENCE "802.1ag clause 17.5" ::= { dot1agPbbCfmMaCompEntry 1 } dot1agPbbCfmMaCompPrimarySelectorType OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorTypeTC MAX-ACCESS read-create STATUS current DESCRIPTION "Type of the Service Selector identifiers indicated by dot1agPbbCfmMaCompPrimarySelectorOrNone. If the service instance is defined by more than one Service Selector, this parameter also indicates the type of the dot1agPbbCfmVlanPrimarySelector and dot1agPbbCfmVlanSelector in the dot1agPbbCfmVlanTable. In Services instances made of multiple Service Selector identifiers, ensures that the type of the Service selector identifiers is the same. See textual convention Dot1agCfmServiceSelectorType for details. " REFERENCE "802.1ag clause 12.14.6.1.3:b" ::= { dot1agPbbCfmMaCompEntry 2 } dot1agPbbCfmMaCompPrimarySelectorOrNone OBJECT-TYPE SYNTAX IEEE8021ServiceSelectorValueOrNoneTC MAX-ACCESS read-create STATUS current DESCRIPTION "Service Selector identifier to which the MP is attached, or 0, if none. If the MA is associated with more than one Service Selectors Identifiers, the dot1agPbbCfmVlanTable lists them. " REFERENCE "802.1ag clause 12.14.6.1.3:b" ::= { dot1agPbbCfmMaCompEntry 3 } dot1agPbbCfmMaCompMhfCreation OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates if the Management entity can create MHFs (MIP Half Function) for this MA. " REFERENCE "802.1ag clause 12.14.6.1.3:c" DEFVAL { defMHFdefer } ::= { dot1agPbbCfmMaCompEntry 4 } dot1agPbbCfmMaCompIdPermission OBJECT-TYPE SYNTAX Dot1agCfmIdPermission MAX-ACCESS read-create STATUS current DESCRIPTION "Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this MA. " REFERENCE "802.1ag clause 12.14.6.1.3:d" DEFVAL { sendIdDefer } ::= { dot1agPbbCfmMaCompEntry 5 } dot1agPbbCfmMaCompNumberOfVids OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The number of VIDs associated with the MA. " REFERENCE "802.1ag clause 12.14.6.1.3:b" ::= { dot1agPbbCfmMaCompEntry 6 } dot1agPbbCfmMaCompRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. " ::= { dot1agPbbCfmMaCompEntry 7 } -- ****************************************************************** -- NOTIFICATIONS (TRAPS) -- These notifications will be sent to the management entity -- whenever a MEP loses/restores contact with one or more other MEPs. -- ****************************************************************** dot1agCfmFaultAlarm NOTIFICATION-TYPE OBJECTS { dot1agCfmMepHighestPrDefect } STATUS current DESCRIPTION "A MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whenever a MEP has a persistent defect, it may or may not generate a Fault Alarm to warn the system administrator of the problem, as controlled by the MEP Fault Notification Generator State Machine and associated Managed Objects. Only the highest-priority defect, as shown in Table 20-1, is reported in the Fault Alarm. If a defect with a higher priority is raised after a Fault Alarm has been issued, another Fault Alarm is issued. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the MEP reporting the defect by the indices in the OID of the dot1agCfmMepHighestPrDefect variable in the notification: dot1agCfmMdIndex - Also the index of the MEP's Maintenance Domain table entry (dot1agCfmMdTable). dot1agCfmMaIndex - Also an index (with the MD table index) of the MEP's Maintenance Association network table entry (dot1agCfmMaNetTable), and (with the MD table index and component ID) of the MEP's MA component table entry (dot1agCfmMaCompTable). dot1agCfmMepIdentifier - MEP Identifier and final index into the MEP table (dot1agCfmMepTable). " REFERENCE "802.1ag clause 12.14.7.7" ::= { dot1agNotifications 1 } -- ****************************************************************** -- IEEE 802.1ag MIB Module - Conformance Information -- ****************************************************************** dot1agCfmCompliances OBJECT IDENTIFIER ::= { dot1agCfmConformance 1 } dot1agCfmGroups OBJECT IDENTIFIER ::= { dot1agCfmConformance 2 } -- ****************************************************************** -- Units of conformance -- ****************************************************************** dot1agCfmStackGroup OBJECT-GROUP OBJECTS { dot1agCfmStackMdIndex, dot1agCfmStackMaIndex, dot1agCfmStackMepId, dot1agCfmStackMacAddress } STATUS current DESCRIPTION "Objects for the Stack group." ::= { dot1agCfmGroups 1 } dot1agCfmDefaultMdGroup OBJECT-GROUP OBJECTS { dot1agCfmDefaultMdDefLevel, dot1agCfmDefaultMdDefMhfCreation, dot1agCfmDefaultMdDefIdPermission, dot1agCfmDefaultMdStatus, dot1agCfmDefaultMdLevel, dot1agCfmDefaultMdMhfCreation, dot1agCfmDefaultMdIdPermission } STATUS current DESCRIPTION "Objects for the Default MD Level group." ::= { dot1agCfmGroups 2 } dot1agCfmVlanIdGroup OBJECT-GROUP OBJECTS { dot1agCfmVlanPrimaryVid, dot1agCfmVlanRowStatus } STATUS current DESCRIPTION "Objects for the VLAN ID group." ::= { dot1agCfmGroups 3 } dot1agCfmConfigErrorListGroup OBJECT-GROUP OBJECTS { dot1agCfmConfigErrorListErrorType } STATUS current DESCRIPTION "Objects for the CFM Configuration Error List Group." ::= {dot1agCfmGroups 4 } dot1agCfmMdGroup OBJECT-GROUP OBJECTS { dot1agCfmMdTableNextIndex, dot1agCfmMdName, dot1agCfmMdFormat, dot1agCfmMdMdLevel, dot1agCfmMdMhfCreation, dot1agCfmMdMhfIdPermission, dot1agCfmMdMaNextIndex, dot1agCfmMdRowStatus } STATUS current DESCRIPTION "Objects for the Maintenance Domain Group." ::={dot1agCfmGroups 5 } dot1agCfmMaGroup OBJECT-GROUP OBJECTS { dot1agCfmMaNetFormat, dot1agCfmMaNetName, dot1agCfmMaNetCcmInterval, dot1agCfmMaNetRowStatus, dot1agCfmMaCompPrimaryVlanId, dot1agCfmMaCompMhfCreation, dot1agCfmMaCompIdPermission, dot1agCfmMaCompRowStatus, dot1agCfmMaCompNumberOfVids, dot1agCfmMaMepListRowStatus } STATUS current DESCRIPTION "Objects for the MA group." ::= { dot1agCfmGroups 6 } dot1agCfmMepGroup OBJECT-GROUP OBJECTS { dot1agCfmMepIfIndex, dot1agCfmMepDirection, dot1agCfmMepPrimaryVid, dot1agCfmMepActive, dot1agCfmMepFngState, dot1agCfmMepCciEnabled, dot1agCfmMepCcmLtmPriority, dot1agCfmMepMacAddress, dot1agCfmMepLowPrDef, dot1agCfmMepFngAlarmTime, dot1agCfmMepFngResetTime, dot1agCfmMepHighestPrDefect, dot1agCfmMepDefects, dot1agCfmMepErrorCcmLastFailure, dot1agCfmMepXconCcmLastFailure, dot1agCfmMepCcmSequenceErrors, dot1agCfmMepCciSentCcms, dot1agCfmMepNextLbmTransId, dot1agCfmMepLbrIn, dot1agCfmMepLbrInOutOfOrder, dot1agCfmMepLbrBadMsdu, dot1agCfmMepLtmNextSeqNumber, dot1agCfmMepUnexpLtrIn, dot1agCfmMepLbrOut, dot1agCfmMepTransmitLbmStatus, dot1agCfmMepTransmitLbmDestMacAddress, dot1agCfmMepTransmitLbmDestMepId, dot1agCfmMepTransmitLbmDestIsMepId, dot1agCfmMepTransmitLbmMessages, dot1agCfmMepTransmitLbmDataTlv, dot1agCfmMepTransmitLbmVlanPriority, dot1agCfmMepTransmitLbmVlanDropEnable, dot1agCfmMepTransmitLbmResultOK, dot1agCfmMepTransmitLbmSeqNumber, dot1agCfmMepTransmitLtmStatus, dot1agCfmMepTransmitLtmFlags, dot1agCfmMepTransmitLtmTargetMacAddress, dot1agCfmMepTransmitLtmTargetMepId, dot1agCfmMepTransmitLtmTargetIsMepId, dot1agCfmMepTransmitLtmTtl, dot1agCfmMepTransmitLtmResult, dot1agCfmMepTransmitLtmSeqNumber, dot1agCfmMepTransmitLtmEgressIdentifier, dot1agCfmMepRowStatus, dot1agCfmLtrForwarded, dot1agCfmLtrRelay, dot1agCfmLtrChassisIdSubtype, dot1agCfmLtrChassisId, dot1agCfmLtrManAddress, dot1agCfmLtrManAddressDomain, dot1agCfmLtrIngress, dot1agCfmLtrIngressMac, dot1agCfmLtrIngressPortIdSubtype, dot1agCfmLtrIngressPortId, dot1agCfmLtrEgress, dot1agCfmLtrEgressMac, dot1agCfmLtrEgressPortIdSubtype, dot1agCfmLtrEgressPortId, dot1agCfmLtrTerminalMep, dot1agCfmLtrLastEgressIdentifier, dot1agCfmLtrNextEgressIdentifier, dot1agCfmLtrTtl, dot1agCfmLtrOrganizationSpecificTlv } STATUS current DESCRIPTION "Objects for the MEP group." ::= { dot1agCfmGroups 7 } dot1agCfmMepDbGroup OBJECT-GROUP OBJECTS { dot1agCfmMepDbRMepState, dot1agCfmMepDbRMepFailedOkTime, dot1agCfmMepDbMacAddress, dot1agCfmMepDbRdi, dot1agCfmMepDbPortStatusTlv, dot1agCfmMepDbInterfaceStatusTlv, dot1agCfmMepDbChassisIdSubtype, dot1agCfmMepDbChassisId, dot1agCfmMepDbManAddressDomain, dot1agCfmMepDbManAddress } STATUS current DESCRIPTION "Objects for the MEP group." ::= { dot1agCfmGroups 8 } dot1agCfmNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { dot1agCfmFaultAlarm } STATUS current DESCRIPTION "Objects for the Notifications group." ::= { dot1agCfmGroups 9 } -- ****************************************************************** -- PBB groups -- ****************************************************************** dot1agPbbCfmStackGroup OBJECT-GROUP OBJECTS { dot1agPbbCfmStackMdIndex, dot1agPbbCfmStackMaIndex, dot1agPbbCfmStackMepId, dot1agPbbCfmStackMacAddress } STATUS current DESCRIPTION "Objects for the Stack group." ::= { dot1agCfmGroups 10 } dot1agPbbCfmMaGroup OBJECT-GROUP OBJECTS { dot1agPbbCfmMaCompPrimarySelectorType, dot1agPbbCfmMaCompPrimarySelectorOrNone, dot1agPbbCfmMaCompMhfCreation, dot1agPbbCfmMaCompIdPermission, dot1agPbbCfmMaCompRowStatus, dot1agPbbCfmMaCompNumberOfVids } STATUS current DESCRIPTION "Objects for the MA group." ::= { dot1agCfmGroups 11 } dot1agPbbCfmDefaultMdGroup OBJECT-GROUP OBJECTS { dot1agPbbCfmDefaultMdStatus, dot1agPbbCfmDefaultMdLevel, dot1agPbbCfmDefaultMdMhfCreation, dot1agPbbCfmDefaultMdIdPermission } STATUS current DESCRIPTION "Objects for the Default MD Level group." ::= { dot1agCfmGroups 12 } dot1agPbbCfmVlanIdGroup OBJECT-GROUP OBJECTS { dot1agPbbCfmVlanPrimarySelector, dot1agPbbCfmVlanRowStatus } STATUS current DESCRIPTION "Objects for the VLAN ID group." ::= { dot1agCfmGroups 13 } dot1agPbbCfmConfigErrorListGroup OBJECT-GROUP OBJECTS { dot1agPbbCfmConfigErrorListErrorType } STATUS current DESCRIPTION "Objects for the CFM Configuration Error List Group." ::= {dot1agCfmGroups 14 } -- ****************************************************************** -- MIB Module Compliance statements -- ****************************************************************** dot1agCfmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for support of the CFM MIB module." MODULE MANDATORY-GROUPS { dot1agCfmStackGroup, dot1agCfmDefaultMdGroup, dot1agCfmConfigErrorListGroup, dot1agCfmMdGroup, dot1agCfmMaGroup, dot1agCfmMepGroup, dot1agCfmMepDbGroup, dot1agCfmNotificationsGroup, dot1agPbbCfmStackGroup, dot1agPbbCfmMaGroup, dot1agPbbCfmDefaultMdGroup, dot1agPbbCfmVlanIdGroup, dot1agPbbCfmConfigErrorListGroup } GROUP dot1agCfmVlanIdGroup DESCRIPTION "The VLAN ID group is optional." OBJECT dot1agCfmMepLbrBadMsdu MIN-ACCESS not-accessible DESCRIPTION "The dot1agCfmMepLbrBadMsdu variable is optional. It MUST not be present if the system cannot compare a received LBR to the corresponding LBM." OBJECT dot1agCfmMdRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT dot1agCfmMaNetRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT dot1agCfmMaCompRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT dot1agCfmVlanRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT dot1agCfmMaMepListRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT dot1agCfmMepRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT dot1agPbbCfmMaCompRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT dot1agPbbCfmVlanRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." ::= { dot1agCfmCompliances 1 } END