All,
Perhaps, if we are going to show the “RQ” primitives in the figure(s) (that is, Figure 6-17, and maybe as suggested in Figure 6-16 also), then we should merge those primitives into the subclause also. That is, merge subclause 6.3.68 into 6.3.56 (and maybe 6.3.67 into 6.3.55)?
Those later clauses have the primitive definitions for MLME-[FINE]TIMINGMSMTRQ, .request and .indication. In the current subclause with Figure 6-17, there are only the primitives for the FTM frames themselves. But, the clause states this, w.r.t. Figure 6-17:
The following set of primitives supports exchange of FTM information from one SME to another.
(M138)The diagram in Figure 6-17 (Fine timing measurement primitives and timestamps capture) shows
various points in time that are of interest to the FTM procedure.
Given the combination of both sets of actions in the Figure, I think having both sets of primitives in the subclause makes sense. Right now, the subclauses are very far apart, and there is no cross-reference hint to go look at the other one, to understand the whole picture that Figure 6-17 is trying to convey.
Mark
From: ***** 802.11 REVm - Revision Maintainance List ***** <STDS-802-11-TGM@xxxxxxxx> On Behalf Of Jon Rosdahl
Sent: Tuesday, March 3, 2020 10:30 PM
To: STDS-802-11-TGM@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGM] Figure 6-17
--- This message came from the IEEE 802.11 Task Group M Technical Reflector ---
Mark RISON pointed out that I attached the original figure, and did not give the updated figure.
The one attached here is the updated figure that he will include in his document of proposed comment resolutions.
If you have any feedback please let Mark RISON know.
-----------------------------------------------------------------------------
Jon Rosdahl Engineer, Senior Staff
IEEE 802 Executive Secretary Qualcomm Technologies, Inc.
office: 801-492-4023 10871 North 5750 West
cell: 801-376-6435 Highland, UT 84003
A Job is only necessary to eat!
A Family is necessary to be happy!!
Emily and Mark have looked at the attached figure to be the resolution for CID resolution to GEN CIDs 4715/4716.
If you have feedback please let me know.
Note that Mark RISON had the following thought:
This change should probably also be made (with "FINE"/"Fine" deleted)
in Figure 6-16—Timing measurement primitives and timestamps capture.
Thanks,
Mark
--
Mark RISON, Standards Architect, WLAN English/Esperanto/Français
-----------------------------------------------------------------------------
Jon Rosdahl Engineer, Senior Staff
IEEE 802 Executive Secretary Qualcomm Technologies, Inc.
office: 801-492-4023 10871 North 5750 West
cell: 801-376-6435 Highland, UT 84003
A Job is only necessary to eat!
A Family is necessary to be happy!!
To unsubscribe from the STDS-802-11-TGM list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGM&A=1
To unsubscribe from the STDS-802-11-TGM list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGM&A=1