Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11] Liaison from 3GPP RAN4 on RSSI measurement accuracy text



--- This message came from the IEEE 802.11 Working Group Reflector ---

--- This message came from the IEEE 802.11 Working Group Reflector ---

Dear 802.11 participants,

 

I cited the incoming liaison from RAN on RSSI measurement accuracy tests in the WG opening plenary

and asked for somebody to lead generation of a response.  Nobody came forward.

 

The liaison is doc 11-16/772r0 and includes:

Overall Description:

In order to verify E-UTRAN-WLAN measurement reporting delay, RAN4 has agreed two test cases: one for E-UTRAN FDD-WLAN interworking case another one for E-UTRAN TDD-WLAN interworking case [1]. These tests will be introduced in 3GPP TS 36.133, Rel-13. The corresponding conformance tests will be defined by RAN5 in their conformance test specifications. 

 

Another set of test cases to define WLAN RSSI measurement accuracy tests were presented for approval in [2]. But due to lack of consensus in RAN4, these tests cases were not agreed. However RAN4 recommends that WLAN RSSI accuracy tests are defined in at least IEEE 802.11 specifications.

 

RAN4 therefore requests IEEE 802.11 WG and WIFI Alliance to specify WLAN RSSI measurement accuracy test cases in their specifications.

 

If anybody is interested in responding substantively to this request,  I recommend that they start with a submission that contains the requested test cases.  I anticipate this material would be added in REVmd.

Does anybody want to volunteer to provide this?

 

Best Regards,

 

Adrian P STEPHENS

 

Tel: +44 (1793) 404825 (office)

Tel: +1 (971) 330 6025 (mobile)
 

----------------------------------------------
Intel Corporation (UK) Limited
Registered No. 1134945 (England)
Registered Office: Pipers Way, Swindon SN3 1RJ
VAT No: 860 2173 47

 

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.

If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________