Re: [10GBASE-T] The channel model

["Chris DiMinico" <cd@mohawk-cdt.com>]

Pirooz,

 

Thanks for the input. I'm planning to schedule a con-call next week to

discuss the channel modeling.

 

What are the requirements that necessitate channel characterization up to 1 GHz?

 

I'd like to limit the channel characterization to account for relevant signal spectrum and

minimize excess bandwidth characterization.

 

Regards,

Chris

----- Original Message -----

From: "Pirooz Hojabri" <pirooz@platolabs.com>

To: <stds-802-3-10gbt@ieee.org>

Sent: Tuesday, January 14, 2003 10:36 PM

Subject: [10GBASE-T] The channel model

>
> Chris,
>
> I would like to propose the following steps in order to validate/generate a
> common channel model for 50m & 100m of CAT6/6e & CAT5e with two connectors:
>
>
> 1) Channel characterization for Attenuation, phase and roughness up to 1GHz.
>
> 2) Cable balance vs frequency up to 1GHz.
>
> 3) Channel characterization for NEXT,ANEXT,FEXT up to 1GHz.
>
> 4) Validate RLCG model based on above characterization.
>
>
> regards,pirooz
>
>
>
>
>
> Plato Labs,Inc
> Pirooz Hojabri
> V.P Mixed Signal
> 408-379-4900
>
>