[802.3_4PPOE] Revised DC MPS presentation

[David Stover <00000687aebafbf1-dmarc-request@xxxxxxxx>]

Suggested baseline for T3/T4 updated to better match T1/T2 text. Note the following changes to baseline text (i.e., presentation slides 10 and 12):

From:

(Slide 10) - "A Type 3 or Type 4 PSE, when connected to a single-signature PD, may consider the DC MPS component to be either present or absent if neither of the above conditions are met."

(Slide 12) - "A Type 3 or Type 4 PSE, when connected to a dual -signature PD, may consider the DC MPS component on a pairset to be either present or absent if neither of the above conditions are met."

To:

(Slide 10) - "A Type 3 or Type 4 PSE, when connected to a single-signature PD, may consider the DC MPS component to be either present or absent if IPort-2P of the pairset with the highest current or the sum of IPort-2P of both pairsets of the same polarity is within the range of the applicable IHold."

(Slide 12) - "A Type 3 or Type 4 PSE, when connected to a dual-signature PD, may consider the DC MPS component on a pairset to be either present or absent if IPort-2P is within the range of the applicable IHold."

Attachment: hstewart_01_0116_DC_MPS_Template_v4.pdf
Description: Adobe PDF document

Attachment: hstewart_01_0116_baseline_v2.pdf
Description: Adobe PDF document