[802.3_B10GAUTO] FW: [802.3_DIALOG] Invitation to participate in Standards Association Ballot of IEEE P802.3cy Greater than 10 Gb/s Electrical Automotive Ethernet
Colleagues,
A reminder that the ballot group for IEEE-SA P802.3cy ballot closes
tomorrow. Please see David Law's email for details if you wish to join the
ballot group.
Regards,
Steve
Steven B. Carlson
Chair, P802.3cy 25 Gb/s Automotive Electrical PHYs Task Force
Executive Secretary, IEEE 802.3 Ethernet Working Group
http://www.ieee802.org/3/index.html
President
High Speed Design, Inc.
Portland, OR
scarlson@xxxxxxxxxxxxx
-----Original Message-----
From: Law, David <dlaw@xxxxxxx>
Sent: Wednesday, August 31, 2022 8:31 AM
To: STDS-802-3-DIALOG@xxxxxxxxxxxxxxxxx
Subject: [802.3_DIALOG] Invitation to participate in Standards Association
Ballot of IEEE P802.3cy Greater than 10 Gb/s Electrical Automotive Ethernet
Dear colleagues,
Draft standards within the IEEE 802.3 Ethernet Working Group pass through
two balloting cycles, first through IEEE 802.3 Working Group Ballot, then
through Standards Association Ballot. If you wish to take part in the
Standards Association Ballot of the IEEE P802.3cy Greater than 10 Gb/s
Electrical Automotive Ethernet draft, please follow the instructions found
below. Please note that you have to join the ballot group by Friday 30
September 2022 23:59 AoE (UTC-12).
If you have any questions, please contact me.
Best regards,
David Law
Chair, IEEE 802.3 Ethernet Working Group
Phone: +44 1631 563729
Email: david_law@xxxxxxxx
ENROLMENT INSTRUCTIONS
----------------------
To participate, you must have access to myProject through an IEEE Web
Account <https://www.ieee.org/about/help/my-account/web-account.html>. This
is the same IEEE Web Account you would use to access the IEEE attendance
tool.
If you are an IEEE-SA member:
Follow this process:
1. Log onto myProject; click the link:
<https://development.standards.ieee.org/myproject-web/app#>.
2. Click on "Menu" in the top right; click on "Invitations/Ballots"; click
on the "Open Invitations Panel"
<https://development.standards.ieee.org/myproject-web/app#ballots>.
3. Scroll down until you find IEEE P802.3cz (if you cannot see IEEE P802.3cz
please select 'All Invitations'); click on the "Join Ballot Group" icon
under the heading "Ballot Invitations".
4. Click "Join The Ballot" on the top right; enter you affiliation(s); click
"Select Classification"; confirm your affiliation(s); select your
classification category, and click "Submit". You will receive an on-screen
confirmation that you successfully joined the group.
If you are not an IEEE SA Member:
You can either enrol in a single ballot by paying a per ballot fee or you
can join the IEEE SA by choosing an option link below. Joining the IEEE SA
entitles you to participate in as many Standards Association ballots as you
like for the year.
OPTION 1 - I am already an IEEE Member and I want to add Standards
Association Membership. Go to:
<http://www.ieee.org/membership_services/index.html>
OPTION 2 - I am not an IEEE Member but would like to enrol in both IEEE and
IEEE Standards Association. Go to:
<http://www.ieee.org/membership_services/membership/join/index.html>.
OPTION 3 - I am not interested in becoming an IEEE Member, however I would
like to enrol as a Standards Association Member only. Go to: <
https://standards.ieee.org/about/membership/index.html>
If you are interested in paying a per ballot fee, please contact
<David_Law@xxxxxxxx> as soon as possible.
OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS
---------------------------------------------
Once the document is ready to be balloted, you will receive notification via
email. You will typically have 30 days to review the document and return the
ballot with your vote. By agreeing to participate in this ballot you have an
*obligation* to respond. Failure to return a completed ballot may disqualify
you from participating in future ballots.
________________________________________________________________________
To unsubscribe from the STDS-802-3-DIALOG list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-DIALOG&A=1
________________________________________________________________________
To unsubscribe from the STDS-802-3-B10GAUTO list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-B10GAUTO&A=1