Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_DMLT] REMINDER : IEEE P802.3br/D2.0 Interspersing Express Traffic Working Group initial ballot closes Tuesday 28th April 2015 23:59 AOE



Dear Colleague,

I would like to remind you that the IEEE 802.3 Working Group Initial ballot on the Amendment IEEE P802.3br Interspersing Express Traffic closes Tuesday 28th April 2015 23:59 AOE. According to my records we have not yet received your response on this ballot and, as with all Working Group ballots, there is a minimum response rate requirement to close the ballot. Your Working Group voting rights are also contingent on ballot participation. The original ballot announcement see below.

Thank you in advance for your participation in this ballot and careful review of the draft.

Mit freundlichen Gruessen / With best regards, Ludwig Winkel

   Vice-chair of IEEE P2413
   Chair of the IEEE P802.3br Task Force
   Co-chair of IEC SG8
   Convenor of IEC SC65B/WG16
   Convenor of IEC SC65C/WG17
   Convenor of IEC SC65C/MT9
   Convenor of CENELEC TC65X/WG1

Mail: Siemens AG , PD TI FC 
        Oestliche Rheinbrueckenstr. 50 
        76187 Karlsruhe, Germany
Tel.: +49 721 595-6098
Mobile: +49 172 6132658
mailto:ludwig.winkel@xxxxxxxxxxx 

Siemens Aktiengesellschaft: Chairman of the Supervisory Board: Gerhard Cromme; Managing Board: Joe Kaeser, Chairman, President and Chief Executive Officer; Roland Busch, Lisa Davis, Klaus Helmrich, Hermann Requardt, Siegfried Russwurm, Ralf P. Thomas; Registered offices: Berlin and Munich, Germany; Commercial registries: Berlin Charlottenburg, HRB 12300, Munich, HRB 6684; WEEE-Reg.-No. DE 23691322

-----Original Message-----
From: Law, David [mailto:dlaw@xxxxxx]
Sent: Freitag, 24. April 2015 18:56
To: David Law <david_law@xxxxxxxx>
Cc: Winkel, Ludwig
Subject: REMINDER : IEEE P802.3br/D2.0 Interspersing Express Traffic Working Group initial ballot closes Tuesday 28th April 2015 23:59 AOE

Dear Colleague,

I would like to remind you that the IEEE 802.3 Working Group Initial ballot on the Amendment IEEE P802.3br Interspersing Express Traffic closes Tuesday 28th April 2015 23:59 AOE. According to my records we have not yet received your response on this ballot and, as with all Working Group ballots, there is a minimum response rate requirement to close the ballot. Your Working Group voting rights are also contingent on ballot participation. The original ballot announcement follows.

Thank you in advance for your participation in this ballot and careful review of the draft.

David Law,
Chair, IEEE 802.3 Ethernet Working Group
Phone: +44 1631 563729
Email: david_law@xxxxxxxx 

Ludwig Winkel
Chair, IEEE P802.3br Interspersing Express Traffic Task Force
Phone: +49 721 595 6098
Email: ludwig.winkel@xxxxxxxxxxx

-----

+++ 802.3 WG INITIAL BALLOT: IEEE P802.3br Interspersing Express Traffic
+++ D2.0 ballot

Dear Colleagues:

This is the announcement of the electronic IEEE 802.3 Working Group Initial ballot on the Amendment IEEE P802.3br Interspersing Express Traffic. Remember that voting, as well as attendance, is a requirement to maintain your IEEE 802.3 member (voter) status. Instructions for accessing the draft, casting your ballot and submitting comments follow this announcement. The ballot group for this draft is the IEEE 802.3 voting membership as of Friday 13th March 2015.

BALLOT SCOPE:
As a Working Group initial ballot, the scope of the ballot is the complete IEEE P802.3br draft.

FIVE CRITERIA:
One of the responsibilities as a balloter is to ensure that draft is consistent with the 5 Criteria responses which are available at <http://ieee802.org/3/br/8023-DMLT-SG-1311-Winkel-5C-v2.3.pdf>. An Approve vote indicates your agreement that the draft is consistent with the 5 Criteria responses.

BALLOT OPEN:
Monday 30th March 2015

BALLOT CLOSE:
Tuesday 28th April 2015 23:59 AOE

The Project Authorization Request for this Amendment is available at <http://ieee802.org/3/br/P802d3br_PAR.pdf> and includes the following:

TITLE:
Standard for Ethernet Amendment Specification and Management Parameters for Interspersing Express Traffic

SCOPE OF PROJECT:
The scope of this project is to specify additions to and appropriate modifications of IEEE Std 802.3 to add support for interspersing express traffic over a single physical link.

NEED FOR THE PROJECT:
* Adoption of Ethernet into new market areas such as automotive, industrial automation, transportation (aircraft, railway and heavy trucks) has generated a need to converge low latency and best effort traffic streams.
* Currently this functionality requires multiple networks with parallel links.
* IEEE Std 802.3 currently does not have support for interspersed express traffic.
* This project will allow the needs of IEEE P802.1Qbu to be met with a single physical link between bridges.

Thank you for your participation in this ballot and careful review of the draft.

David Law
Chair, IEEE 802.3 Ethernet Working Group
Phone: +44 1631 563729
Email: david_law@xxxxxxxx 

Ludwig Winkel
Chair, IEEE P802.3br Interspersing Express Traffic Task Force
Phone: +49 721 595 6098
Email: ludwig.winkel@xxxxxxxxxxx

----------------------------------------------------------------

INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3br draft D2.0

Instructions for accessing the ballot documents, casting your ballot and submitting comments follow.

HOW TO ACCESS THE DRAFT
The draft is posted for your review for balloting purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights.

The IEEE P802.3br Interspersing Express Traffic draft D2.0 may be downloaded from:

URL: http://www.ieee802.org/3/br/private/02_WG_Drafts/802.3br_D2p0.pdf
Username: 802.3
Password: Ask Ludwig to get the password.

This document is posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it may be downloaded for free downloading from Adobe from:

<http://www.adobe.com/prodindex/acrobat/readstep.html>


HOW TO CAST YOUR BALLOT

To assure your ballot is counted, please:

1) Send your ballot to: stds-802-3-ballot@xxxxxxxx

2) Paste the following line into the subject field:

IEEE P802.3br Interspersing Express Traffic D2.0 ballot

This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE P802.3br Interspersing Express Traffic D2.0 ballot>

3) Paste into the message body and complete the ballot form below:

-----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

IEEE P802.3br Interspersing Express Traffic D2.0 ballot

Your Name:___________________________
 
 
 ___ APPROVE ALL WITHOUT COMMENT
 
 ___ APPROVE ALL WITH COMMENTS on SOME
       (All comments are non-binding)
 
 ___ DISAPPROVE
       (Some or all comments are binding; a voter must attach specific comments for remedy)
 
 ___ ABSTAIN, Lack of Expertise
 
 ___ ABSTAIN, Lack of Time
 
 
-----------------------end ballot form--------------------

HOW TO SUBMIT COMMENTS

Acceptable comment types:

E = Editorial
ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) T = Technical TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member)

1. Prepare your comments in one of the following two ways:

a. You are STRONGLY REQUESTED to use the comment tool at the URL:

<http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool.zip>

To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is:

Comment_Tool_Generic_Solution.exe

b. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail.

PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use the comment tool above if possible.
 
 ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

 CommentID: (Leave Blank)
 CommenterName:
 CommenterEmail:
 CommenterPhone:
 CommenterCellPhone:
 CommenterCompany:
 Clause:
 Subclause:
 Page:
 Line:
 CommentType: (E, ER, T, or TR)
 Comment:
 CommentEnd:
 SuggestedRemedy:
 RemedyEnd:

 --------------------end comment template------------------

2. Send your comments to: stds-802-3-ballot@xxxxxxxx and paste into the subject line:

IEEE P802.3br Interspersing Express Traffic D2.0 comments

This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE P802.3br Interspersing Express Traffic D2.0 comments>