Re: [802.3_NGEPON] IEEE P802.3ca/D2.2 25 Gb/s and 50 Gb/s Ethernet Passive Optical Networks Working Group 2nd recirculation ballot
Dear IEEE P802.3ca Task Force Participants,
I would like to correct an item in the email below. I provided Curtis with the incorrect date for the formation of the Working Group ballot group for this project. The ballot group for this draft is the IEEE 802.3 voting membership as of Thursday 23rd May 2019 as correctly stated in the ballot notice below. My apologies for any confusion.
Best regards,
David
-----Original Message-----
From: Curtis Knittle [mailto:C.Knittle@xxxxxxxxxxxxx]
Sent: 18 September 2019 14:35
To: STDS-802-3-NGEPON@xxxxxxxxxxxxxxxxx
Subject: [802.3_NGEPON] IEEE P802.3ca/D2.2 25 Gb/s and 50 Gb/s Ethernet Passive Optical Networks Working Group 2nd recirculation ballot
Dear Task Force Participants,
With this e-mail, I'd like to announce the start of the IEEE P802.3ca/D2.2 25 Gb/s and 50 Gb/s Ethernet Passive Optical Networks Working Group 2nd recirculation ballot.
Open date: Wednesday 18th September 2019 Close date: Wednesday 2nd October 2019 23:59 AOE
As stated in the announcement below, the ballot group for this draft is the IEEE 802.3 voting membership as of Monday 30th September 2019. All comments received before the close of ballot will be considered, the one limitation however is that if you are not a member of the balloting group, and therefore cannot cast a ballot, you cannot designate comments as TR or ER since you cannot cast a Disapprove ballot.
Best regards,
Curtis Knittle
Chair, IEEE P802.3ca 25 Gb/s and 50 Gb/s Ethernet Passive Optical Networks Task Force
-----
Dear Colleagues,
This is the announcement of the electronic IEEE 802.3 Working Group 2nd recirculation ballot on the Amendment IEEE P802.3ca 25 Gb/s and 50 Gb/s Ethernet Passive Optical Networks. Remember that voting, as well as attendance, is a requirement to maintain your IEEE 802.3 member (voter) status <http://ieee802.org/3/rules/member.html#DOT3 >. Instructions for accessing the draft, casting your ballot and submitting comments follow this announcement. Please review the commenting instructions below to ensure you are using the most up to date tools.
The ballot group for this draft is the IEEE 802.3 voting membership as of Thursday 23rd May 2019.
Because this is a recirculation ballot, YOU ONLY NEED TO CAST A BALLOT IF YOU WISH TO CHANGE YOUR VOTE FROM THAT WHICH WAS RECORDED ON THE INITIAL BALLOT OR LAST RECIRCULATION. If you voted previously and your vote has not changed, the last ballot cast will be carried over to this ballot and you do not need to cast a new ballot.
BALLOT SCOPE:
During this IEEE 802.3 Working Group 2nd recirculation ballot, the scope of the ballot is the substantive changes between IEEE P802.3ca/D2.1 and IEEE P802.3ca/D2.2 and the unsatisfied negative comments.
CRITERIA FOR STANDARDS DEVELOPMENT:
One of the responsibilities as a balloter is to ensure that draft is consistent with the criteria for standards development (CSD) responses which are available at <https://mentor.ieee.org/802-ec/dcn/18/ec-18-0247-00-ACSD-p802-3ca.pdf >. An Approve vote indicates your agreement that the draft is consistent with the CSD responses.
BALLOT OPEN:
Wednesday 18th September 2019
BALLOT CLOSE:
Wednesday 2nd October 2019 23:59 AOE
The Project Authorization Request for this Amendment is available at <http://ieee802.org/3/ca/documents/P802_3ca_PAR_approved.pdf > and includes the following:
TITLE:
Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 25 Gb/s and 50 Gb/s Passive Optical Networks
SCOPE OF PROJECT:
The scope of this project is to amend IEEE Std 802.3 to add physical layer specifications and management parameters for point-to-multipoint passive optical networks supporting MAC data rates of 25 Gb/s or 50 Gb/s in the downstream direction and 10 Gb/s, 25 Gb/s, or 50 Gb/s in the upstream direction, with distance and split ratios consistent with those defined in IEEE Std 802.3. It also extends the operation of Ethernet Passive Optical Networks (EPON) protocols, such as MultiPoint Control Protocol (MPCP) and Operation Administration and Management (OAM).
NEED FOR THE PROJECT:
The project is applicable to business and residential access environments. The project is needed to enable access network operators to provide advanced bandwidth-intensive services while reducing footprint of network equipment, simplifying service upgrades, reducing network upgrade cost, and reducing fiber deployment costs.
Thank you for your participation in this ballot and careful review of the draft.
David Law
Chair, IEEE 802.3 Ethernet Working Group
Phone: +44 1631 563729
Email: david_law@xxxxxxxx
Curtis Knittle
Chair, IEEE P802.3ca 25 Gb/s and 50 Gb/s Ethernet Passive Optical Networks Task Force
Phone: +1 303 661 3851
Email: c.knittle@xxxxxxxxxxxxx
----------------------------------------------------------------
INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3ca draft D2.2
Instructions for accessing the ballot documents, casting your ballot and submitting comments follow.
HOW TO ACCESS THE DRAFT
The draft is posted for your review for balloting purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights.
The IEEE P802.3ca 25 Gb/s and 50 Gb/s Ethernet Passive Optical Networks draft D2.2 may be downloaded from:
URL: <http://ieee802.org/3/ca/private/drafts/D2_2/draft_3ca_D2_2_clean.pdf >
Username: [IEEE 802.3 or IEEE P802.3ca username]
Password: [IEEE 802.3 or IEEE P802.3ca password]
Please submit comments against the above draft.
A comparison file between IEEE P802.3ca 25 Gb/s and 50 Gb/s Ethernet Passive Optical Networks draft D2.1 and D2.2 is also provided to both focus and ease your review. Please DO NOT comment on this comparison document. This draft may be downloaded from:
<http://ieee802.org/3/ca/private/drafts/D2_2/draft_3ca_D2_2_diff.pdf >
Please DO NOT submit comments against the above document.
Unsatisfied negative comments, and their dispositions may be downloaded from:
<http://ieee802.org/3/ca/comments/802d3ca_D2_all_unsatisfied_20190917.pdf >
All comments, and their dispositions, from the 1st recirculation ballot may be downloaded from:
<http://ieee802.org/3/ca/comments/802d3ca_D2_1_approved_20190917.pdf >
These documents are posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it may be downloaded for free downloading from Adobe from:
<http://www.adobe.com/prodindex/acrobat/readstep.html >
HOW TO CAST YOUR BALLOT
To assure your ballot is counted, please:
1) Send your ballot to: stds-802-3-ballot@xxxxxxxx
2) Paste the following line into the subject field:
IEEE P802.3ca 25 Gb/s and 50 Gb/s Ethernet Passive Optical Networks D2.2 ballot
This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3ca%2025%20Gb/s%20and%2050%20Gb/s%20Ethernet%20Passive%20Optical%20Networks%20D2.2%20ballot>
3) Paste into the message body and complete the ballot form below:
-----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------
IEEE P802.3ca 25 Gb/s and 50 Gb/s Ethernet Passive Optical Networks D2.2 ballot
Your Name:___________________________
___ APPROVE ALL WITHOUT COMMENT
___ APPROVE ALL WITH COMMENTS on SOME
(All comments are non-binding)
___ DISAPPROVE
(Some or all comments are binding; a voter must submit specific comments for remedy)
___ ABSTAIN, Lack of Expertise
___ ABSTAIN, Lack of Time
-----------------------end ballot form--------------------
HOW TO SUBMIT COMMENTS
Acceptable comment types:
E = Editorial
ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) T = Technical TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member)
1. Prepare your comments in one of the following three ways. You are STRONGLY REQUESTED to use either the comment tool or spreadsheet. A comment entry tutorial is available at:
<http://ieee802.org/3/ballots/p802d3_comment_entry_tutorial_v1p0.pdf >
a. Access the comment tool at the URL:
<http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool_FM.zip >
To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is:
Comment_Tool_Generic_Solution.exe
b. Access the comment spreadsheet at the URL:
<http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls >
c. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail.
PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use one of the comment tools above if possible.
------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------
CommentID: (Leave Blank)
CommenterName:
CommenterCompany:
Clause:
Subclause:
Page:
Line:
CommentType: (E, ER, T, or TR)
Comment:
CommentEnd:
SuggestedRemedy:
RemedyEnd:
--------------------end comment template------------------
2. Send your comments to: stds-802-3-ballot@xxxxxxxx and paste into the subject line:
IEEE P802.3ca 25 Gb/s and 50 Gb/s Ethernet Passive Optical Networks D2.2 comments
This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3ca%2025%20Gb/s%20and%2050%20Gb/s%20Ethernet%20Passive%20Optical%20Networks%20D2.2%20comments>
________________________________________________________________________
To unsubscribe from the STDS-802-3-NGEPON list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGEPON&A=1
________________________________________________________________________
To unsubscribe from the STDS-802-3-NGEPON list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGEPON&A=1