Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_10SPE] IEEE P802.3cg/D2.4 10 Mb/s Single Pair Ethernet Working Group 4th recirculation ballot



Dear Task Force Participants,

 

With this e-mail, I'd like to announce the start of the IEEE P802.3cg/D2.4 10 Mb/s Single Pair Ethernet Working Group 4th recirculation ballot.

 

Open date: Thursday 21st February 2019

Close date: Friday 8th March 2019 23:59 AOE

 

As stated in the attached announcement, the ballot group for this draft is the IEEE 802.3 voting membership as of Sunday 15th July 2018. All comments received before the close of ballot will be considered, the one limitation however is that if you are not a member of the balloting group, and therefore cannot cast a ballot, you cannot designate comments as TR or ER since you cannot cast a Disapprove ballot.

 

Best regards,

George Zimmerman

Chair, IEEE P802.3cg 10 Mb/s Single Pair Ethernet Task Force

 

----

 

Dear Colleagues,

 

This is the announcement of the electronic IEEE 802.3 Working Group 4th recirculation ballot on the Amendment IEEE P802.3cg 10 Mb/s Single Pair Ethernet. Remember that voting, as well as attendance, is a requirement to maintain your IEEE 802.3 member (voter) status <http://ieee802.org/3/rules/member.html#DOT3>. Instructions for accessing the draft, casting your ballot and submitting comments follow this announcement. Please review the commenting instructions below to ensure you are using the most up to date tools.

 

The ballot group for this draft is the IEEE 802.3 voting membership as of Sunday 15th July 2018.

 

Because this is a recirculation ballot, YOU ONLY NEED TO CAST A BALLOT IF YOU WISH TO CHANGE YOUR VOTE FROM THAT WHICH WAS RECORDED ON THE INITIAL BALLOT OR LAST RECIRCULATION. If you voted previously and your vote has not changed, the last ballot cast will be carried over to this ballot and you do not need to cast a new ballot.

 

BALLOT SCOPE:

During this IEEE 802.3 Working Group 4th recirculation ballot, the scope of the ballot is the substantive changes between IEEE P802.3cg/D2.3 and IEEE P802.3cg/D2.4 and the unsatisfied negative comments.

 

CRITERIA FOR STANDARDS DEVELOPMENT:

One of the responsibilities as a balloter is to ensure that draft is consistent with the criteria for standards development (CSD) responses which are available at <https://mentor.ieee.org/802-ec/dcn/18/ec-18-0079-00-ACSD-802-3cg.pdf>. An Approve vote indicates your agreement that the draft is consistent with the CSD responses.

 

BALLOT OPEN:

Thursday 21st February 2019

 

BALLOT CLOSE:

Friday 8th March 2019 23:59 AOE

 

The Project Authorization Request for this Amendment is available at <http://www.ieee802.org/3/cg/P802_3cg_PAR_140518.pdf> and includes the following:

 

TITLE:

Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 10 Mb/s Operation and Associated Power Delivery over a Single Balanced Pair of Conductors

 

SCOPE OF PROJECT:

Specify additions to and appropriate modifications of IEEE Std 802.3 to add 10 Mb/s Physical Layer (PHY) specifications and management parameters for operation, and associated optional provision of power, using a single balanced pair of conductors.

 

NEED FOR THE PROJECT:

Applications such as those used in automotive and automation industries have begun the transition of legacy networks to Ethernet. This has generated an intrasystem control need for a 10 Mb/s solution which will operate over a single balanced pair of conductors. IEEE 802.3 does not currently support 10 Mb/s over a single balanced pair of conductors, and a reduction in the number of pairs of conductors and interface components required for 10 Mb/s Ethernet will provide a basis for an optimized solution in these applications.

 

Thank you for your participation in this ballot and careful review of the draft.

 

David Law

Chair, IEEE 802.3 Ethernet Working Group

Phone: +44 1631 563729

Email: david_law@xxxxxxxx

 

George Zimmerman

Chair, IEEE P802.3cg 10 Mb/s Single Pair Ethernet Task Force

Phone: +1 310 920 3860

Email: george@xxxxxxxxxxxxxxxxxxxx

 

----------------------------------------------------------------

 

INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3cg draft D2.4

 

Instructions for accessing the ballot documents, casting your ballot and submitting comments follow.

 

HOW TO ACCESS THE DRAFT

The draft is posted for your review for balloting purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights.

 

The IEEE P802.3cg 10 Mb/s Single Pair Ethernet draft D2.4 may be downloaded from:

 

URL: <http://www.ieee802.org/3/cg/private/8023cg_D2p4.pdf>

Username: [IEEE 802.3 or IEEE P802.3cg username]

Password: [IEEE 802.3 or IEEE P802.3cg password]

 

Please submit comments against the above draft.

 

A comparison file between IEEE P802.3cg 10 Mb/s Single Pair Ethernet draft D2.3 and D2.4 is also provided to both focus and ease your review. Please DO NOT comment on this comparison document. This draft may be downloaded from:

 

<http://www.ieee802.org/3/cg/private/8023cg_D2p4CMP%20Substantive.pdf>

 

Please DO NOT submit comments against the above document.

 

Unsatisfied negative comments, and their dispositions may be downloaded from:

 

<http://www.ieee802.org/3/cg/comments/802d3cg_allNotSat_report_ID_20190220.pdf>

 

All comments, and their dispositions, from the 3rd recirculation ballot may be downloaded from:

 

<http://ieee802.org/3/cg/comments/802.3cg_draft2p3_Resolved_By%20Comment%20ID.pdf>

 

These documents are posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it may be downloaded for free downloading from Adobe from:

 

<http://www.adobe.com/prodindex/acrobat/readstep.html>

 

 

HOW TO CAST YOUR BALLOT

 

To assure your ballot is counted, please:

 

1) Send your ballot to: stds-802-3-ballot@xxxxxxxx

 

2) Paste the following line into the subject field:

 

IEEE P802.3cg 10 Mb/s Single Pair Ethernet D2.4 ballot

               

This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3cg%2010%20Mb/s%20Single%20Pair%20Ethernet%20D2.4%20ballot>

 

3) Paste into the message body and complete the ballot form below:

 

-----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

 

IEEE P802.3cg 10 Mb/s Single Pair Ethernet D2.4 ballot

 

Your Name:___________________________

 

 ___ APPROVE ALL WITHOUT COMMENT

 ___ APPROVE ALL WITH COMMENTS on SOME

       (All comments are non-binding)

 ___ DISAPPROVE

       (Some or all comments are binding; a voter must submit specific comments for remedy)

 ___ ABSTAIN, Lack of Expertise

 ___ ABSTAIN, Lack of Time

 

-----------------------end ballot form--------------------

 

HOW TO SUBMIT COMMENTS

 

Acceptable comment types:

 

E = Editorial

ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) T = Technical TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member)

 

1. Prepare your comments in one of the following three ways. You are STRONGLY REQUESTED to use either the comment tool or spreadsheet. A comment entry tutorial is available at:

 

<http://ieee802.org/3/ballots/p802d3_comment_entry_tutorial_v1p0.pdf>

 

a. Access the comment tool at the URL:

 

<http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool_FM.zip>

 

To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is:

 

Comment_Tool_Generic_Solution.exe

 

b. Access the comment spreadsheet at the URL:

 

<http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls>

 

c. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail.

 

PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use one of the comment tools above if possible.

 ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

 

CommentID: (Leave Blank)

CommenterName:

CommenterCompany:

Clause:

Subclause:

Page:

Line:

CommentType: (E, ER, T, or TR)

Comment:

CommentEnd:

SuggestedRemedy:

RemedyEnd:

 

--------------------end comment template------------------

 

2. Send your comments to: stds-802-3-ballot@xxxxxxxx and paste into the subject line:

 

IEEE P802.3cg 10 Mb/s Single Pair Ethernet D2.4 comments

 

This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3cg%2010%20Mb/s%20Single%20Pair%20Ethernet%20D2.4%20comments>

 

 

George Zimmerman, Ph.D.

Chair, IEEE P802.3cg 10 Mb/s Single Pair Ethernet Task Force

President & Principal

CME Consulting, Inc.

Experts in Advanced PHYsical Communications

george@xxxxxxxxxxxxxxxxxxxx

310-920-3860

 

 


To unsubscribe from the STDS-802-3-10SPE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-10SPE&A=1