Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: [EFM] RE: Pause frame usage in transport networks




Shahram,

Depending on the "service" definition and the technology used, "Ethernet 
over SONET" can be either a "Packet/Frame Relay" service or a "Leased 
Circuit" service.  G.gfp and the architecture of E.etna are geared more 
toward "Packet" and "Frame Relay" types of services, including the 
so-called "broadband services".  X.86 is specifically designed for "Leased 
Circuit" and "Switched Circuit" services.  In order to know what kind of 
service the customer is getting he would have to know what the service 
provider has implemented and is actually offering in the way performance, 
reliability, and functionality.

Thank you,
Roy Bynum

At 07:52 AM 2/21/2003 -0800, Shahram Davari wrote:

>Ben,
>
>Thanks. What category do you think Ethernet over Sonet is?
>
>Yours,
>-Shahram
>
> > -----Original Message-----
> > From: Ben Brown [mailto:bbrown@xxxxxxxx]
> > Sent: Friday, February 21, 2003 10:50 AM
> > To: Shahram Davari
> > Cc: 'Siamack Ayandeh'; Roy Bynum; Geoff Thompson; mattsquire@xxxxxxx;
> > Chau Chak; stds-802-3-efm@ieee.org
> > Subject: Re: [EFM] RE: Pause frame usage in transport networks
> >
> >
> >
> > Shahram,
> >
> > As Roy Bynum has pointed out, the "leased line" network would pass
> > the OAM frames end to end. The "packet" networks would not. Just
> > use the appropriate protocol based on your network type.
> >
> > Regards,
> > Ben
> >
> > Shahram Davari wrote:
> > >
> > > Ben,
> > >
> > > > -----Original Message-----
> > > > From: Ben Brown [mailto:bbrown@xxxxxxxx]
> > > > Sent: Friday, February 21, 2003 10:27 AM
> > > > To: Shahram Davari
> > > > Cc: 'Siamack Ayandeh'; Roy Bynum; Geoff Thompson;
> > mattsquire@xxxxxxx;
> > > > Chau Chak; stds-802-3-efm@ieee.org
> > > > Subject: Re: [EFM] RE: Pause frame usage in transport networks
> > > >
> > > >
> > > >
> > > > Shahram,
> > > >
> > > > OAM is a link specific protocol.
> > > > If a customer wants to check
> > > > connectivity within his private network and there are multiple
> > > > links with switches between his end stations, he would not use
> > > > OAM.
> > >
> > > But if a customer is buying a leased-line or private-line
> > service (like EOS),
> > > he expects the service behave like a single link for him.
> > So he should
> > > be able to run 802.3ah OAM between its sites. Note that I
> > am not talking
> > > about switched services, I am talking about pure
> > point-to-point services.
> > >
> > >  This same thing would apply to an access/transport network
> > > > that has multiple links. You have to use a higher layer protocol,
> > > > something that is not link specific.
> > >
> > > Agree.
> > >
> > > Yours,
> > > -Shahram
> > >
> > > >
> > > > Regards,
> > > > Ben
> > > >
> > > > Shahram Davari wrote:
> > > > >
> > > > > Hi Siamak,
> > > > >
> > > > > What should a customer do if he wants to check the
> > > > connectivity between his sites?
> > > > > You need to be able to pass OAM frames through the core.
> > > > >
> > > > > -Shahram
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Siamack Ayandeh [mailto:sayandeh@xxxxxxx]
> > > > > > Sent: Thursday, February 20, 2003 10:30 PM
> > > > > > To: Shahram Davari
> > > > > > Cc: Roy Bynum; Ben Brown; Geoff Thompson; mattsquire@xxxxxxx;
> > > > > > Chau Chak;
> > > > > > stds-802-3-efm@ieee.org
> > > > > > Subject: Re: [EFM] RE: Pause frame usage in transport networks
> > > > > >
> > > > > >
> > > > > > Sharam, So its settled then.
> > > > > >
> > > > > > Siamack
> > > > > > P.S. you never mentioned what OAM function needs to be sent
> > > > > > beyond OLT. Why
> > > > > > for example the far side may be interested in BER of the
> > > > near side?
> > > > > >
> > > > > > Shahram Davari wrote:
> > > > > >
> > > > > > > Siamak and all,
> > > > > > >
> > > > > > > I was just talking to a major carrier and in their initial
> > > > > > deployment
> > > > > > > of EOS they are relying on customer shaping/rate limiting.
> > > > > > They don't send
> > > > > > > any PAUSE at all.
> > > > > > >
> > > > > > > Yours,
> > > > > > > Shahram
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Shahram Davari
> > > > > > > > Sent: Thursday, February 20, 2003 2:21 PM
> > > > > > > > To: 'Siamack Ayandeh'; Roy Bynum
> > > > > > > > Cc: Ben Brown; Geoff Thompson;
> > mattsquire@xxxxxxx; Chau Chak;
> > > > > > > > stds-802-3-efm@ieee.org
> > > > > > > > Subject: [EFM] RE: Pause frame usage in transport networks
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Siamak and all,
> > > > > > > >
> > > > > > > > Thanks for starting discussion on my original question.
> > > > > > > > But my original question was more related to 802.3ah OAM.
> > > > > > > > Do you think that the OLT should terminate 802.3ah OAM
> > > > > > > > frames received from ONU?
> > > > > > > >
> > > > > > > > Please see some comments in-line.
> > > > > > > >
> > > > > > > > Yours,
> > > > > > > > -Shahram
> > > > > > > >
> > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: Siamack Ayandeh [mailto:sayandeh@xxxxxxx]
> > > > > > > > > Sent: Thursday, February 20, 2003 10:49 AM
> > > > > > > > > To: Roy Bynum
> > > > > > > > > Cc: Ben Brown; Geoff Thompson;
> > mattsquire@xxxxxxx; Shahram
> > > > > > > > > Davari; Chau
> > > > > > > > > Chak; stds-802-3-efm@ieee.org
> > > > > > > > > Subject: Re: Pause frame usage in transport networks
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Roy,
> > > > > > > > >
> > > > > > > > > I suggest that we shy away from generalizations
> > that arise
> > > > > > > > > from a broad brush
> > > > > > > > > discussion. I made very specific comments on the
> > > > mailing list
> > > > > > > > > and would be happy to
> > > > > > > > > discuss specifics.  Here is a brief summary (Please
> > > > note that
> > > > > > > > > discussion was
> > > > > > > > > focused on EoS for Ethernet Private Line type
> > services. So
> > > > > > > > > both ends of the service
> > > > > > > > > would have the same traffic parameters. More
> > > > involved service
> > > > > > > > > definitions were not
> > > > > > > > > part of this discussion):
> > > > > > > > >
> > > > > > > > > 1. Network to subscriber Pause has advantages over
> > > > shaping at
> > > > > > > > > subscriber
> > > > > > > >
> > > > > > > > I wouldn't call it advantage. I think both are
> > > > > > acceptable. In one case
> > > > > > > > the ONU drops packet while in other case the OLT.
> > > > > > > >
> > > > > > > >
> > > > > > > > > 2. Subscriber to network Pause is UNlikely to
> > be invoked as
> > > > > > > > > most often the backbone
> > > > > > > > > link is the bottleneck. However if it does network would
> > > > > > > > > buffer and subsequently
> > > > > > > > > drop packets.
> > > > > > > >
> > > > > > > >
> > > > > > > > Agree. The link BW is usually more than the SONET
> > VC. Besides
> > > > > > > > OLT can't
> > > > > > > > back pressure the SONET.
> > > > > > > >
> > > > > > > > >Sending Pause to the far end is not practical
> > > > > > > > > as it would require
> > > > > > > > > large buffers to absorb the wide area round trip delays.
> > > > > > > >
> > > > > > > > We have heard some customers requiring this
> > functionality. The
> > > > > > > > problem is, how can we have both ONU-OLT pause and
> > > > ONU-ONU pause?
> > > > > > > >
> > > > > > > > > 3. Pause would not interfere with OAM, if
> > anything it avoids
> > > > > > > > > loss of OAM frames and
> > > > > > > > > the resulting time outs.
> > > > > > > >
> > > > > > > > Actually if you read 802.3ah section 55.1.6.3 it says that
> > > > > > > > PAUSE frames
> > > > > > > > may delay/prevent signaling of critical events. I
> > think the
> > > > > > > > reason is that
> > > > > > > > PAUSE frames are treated the same as user MAC frames.
> > > > > > > >
> > > > > > > > >
> > > > > > > > > Regards, Siamack
> > > > > > > > >
> > > > > > > > > Roy Bynum wrote:
> > > > > > > > >
> > > > > > > > > > Ben, Siamack,
> > > > > > > > > >
> > > > > > > > > > In these comments I am seeing the movement
> > toward an link
> > > > > > > > > facility that can
> > > > > > > > > > be labeled as "Ethernet", but has little or none of
> > > > > > the inherent
> > > > > > > > > > characteristics of reliability and low
> > latency variance.
> > > > > > > > > Any Ethernet
> > > > > > > > > > service that claims to be full duplex, but
> > drops frames
> > > > > > > > > without generating
> > > > > > > > > > a "collision" when congested will fail meet the basic
> > > > > > reliability
> > > > > > > > > > characteristic of any 802.3 standard that I
> > am aware of.
> > > > > > > > > This is NOT Ethernet.
> > > > > > > > > >
> > > > > > > > > > The ONU should be allowed to "pause" the GFP/OLT
> > > > on any one
> > > > > > > > > link, and the
> > > > > > > > > > GFP/OLT, should be allowed to "pause" the ONU
> > on any one
> > > > > > > > > link.  With proper
> > > > > > > > > > configuration of the operands, an ONU at one
> > end of an end
> > > > > > > > > to end "link"
> > > > > > > > > > should be able to "pause" the ONU at the other end.
> > > > > > Without that
> > > > > > > > > > capability, what is being defined is no more
> > reliable that
> > > > > > > > > what exists
> > > > > > > > > > today, and is some respects is less reliable than the
> > > > > > alternative.
> > > > > > > > > >
> > > > > > > > > > When an end to end link starts "dropping"
> > frames, the data
> > > > > > > > > packets get
> > > > > > > > > > retransmitted in new frames which now adds to the
> > > > > > > > > congestion of a link and
> > > > > > > > > > thus lowers the effective access bandwidth that can be
> > > > > > > > > utilized.  This has
> > > > > > > > > > the effect of lowering the effective committed
> > > > > > > > information rate even
> > > > > > > > > > more.  This is one of the primary reasons
> > that experienced
> > > > > > > > > WAN networking
> > > > > > > > > > architects design IP networks to run as a nominal 30%
> > > > > > > > > utilization.  (I
> > > > > > > > > > remember reading something by David Boggs about ~30%
> > > > > > > > > utilization being the
> > > > > > > > > > effective performance ceiling of congestion domain
> > > > > > > > > networks.  I turns out
> > > > > > > > > > that he knew what he was talking about.)
> > > > > > > > > >
> > > > > > > > > > The current defined X.86/OLT does make use of "pause"
> > > > > > > > > functionality, and
> > > > > > > > > > will allow an ONU at one end of an end to end
> > link "pause"
> > > > > > > > > the ONU at the
> > > > > > > > > > other end.  By properly use of active flow control,
> > > > > > the service
> > > > > > > > > > communications link can perform as a
> > non-congestion domain
> > > > > > > > > link.  With
> > > > > > > > > > properly configured operands at the ONUs,
> > this would be
> > > > > > > > > highly reliable at
> > > > > > > > > > the cost of lower predetermined bandwidth
> > > > > > utilization, but without
> > > > > > > > > > retransmissions.  In experiments performed in the
> > > > 1998-2000
> > > > > > > > > time frame,
> > > > > > > > > > effective utilization was found to be a
> > direct ratio of
> > > > > > > > > link/circuit speed
> > > > > > > > > > to distance (I am having to write this from
> > memory because
> > > > > > > > > I no longer have
> > > > > > > > > > access to the data.)  Properly configured use
> > of active
> > > > > > > > > flow control can
> > > > > > > > > > allow architecture designs with much higher effective
> > > > > > > > > bandwidth utilization
> > > > > > > > > > than 30%.
> > > > > > > > > >
> > > > > > > > > > Thank you,
> > > > > > > > > > Roy Bynum
> > > > > > > > > >
> > > > > > > > > > At 10:15 PM 2/18/2003 -0500, Siamack Ayandeh wrote:
> > > > > > > > > > >Ben,
> > > > > > > > > > >
> > > > > > > > > > >Please see my comments interleaved.
> > > > > > > > > > >
> > > > > > > > > > >Regards, Siamack
> > > > > > > > > > >
> > > > > > > > > > >Ben Brown wrote:
> > > > > > > > > > >
> > > > > > > > > > > > Siamack,
> > > > > > > > > > > >
> > > > > > > > > > > > This comment is way off track of the original
> > > > > > question but I
> > > > > > > > > > > > feel a need to ask this question. That's why
> > > > I changed the
> > > > > > > > > > > > subject. I'll even redraw the network so that
> > > > > > we're all using
> > > > > > > > > > > > the same context.
> > > > > > > > > > > >
> > > > > > > > > > > > ONU1 ------ OLT1/GFP ------------------- GFP/OLT2
> > > > > > ------ ONU2
> > > > > > > > > > > >     Ethernet                SONET
> > > >    Ethernet
> > > > > > > > > > > >
> > > > > > > > > > > > Why are Pause frames used on the Ethernet
> > links? The
> > > > > > > > ONU should
> > > > > > > > > > > > never be allowed to Pause the OLT as that would
> > > > > > back-pressure
> > > > > > > > > > > > the entire WAN. Since the WAN doesn't support
> > > > > > back-pressure,
> > > > > > > > > > > > packets over the SONET link that exceed the OLT's
> > > > > > > > egress buffers
> > > > > > > > > > > > would wind up being dropped at the OLT.
> > > > > > > > > > >
> > > > > > > > > > >That's basically what I said "OLT can simply
> > buffer and
> > > > > > > > > subsequently drop
> > > > > > > > > > >packets."
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > The OLT could Pause the ONU but for what
> > reason? The
> > > > > > > > only reason
> > > > > > > > > > > > that I can think of would be to enforce the ONU's
> > > > > > > > SLA. The point
> > > > > > > > > > > > of putting an SLA in place is to enforce some set
> > > > > > of rules,
> > > > > > > > > > > > usually having to do with the minimum and maximum
> > > > > > throughput
> > > > > > > > > > > > guaranteed at the OLT for the ONU. The reason an
> > > > > > SLA needs to
> > > > > > > > > > > > be in place is because each side doesn't
> > > > really trust the
> > > > > > > > > > > > other's "handshake" and a legal document of sorts
> > > > > > is needed.
> > > > > > > > > > > > So, if neither side "trusts" the other, why
> > > > do you rely on
> > > > > > > > > > > > Pause frames to enforce the SLA? If the ONU will
> > > > > > attempt to
> > > > > > > > > > > > use as much bandwidth as possible, it will
> > > > likely do so by
> > > > > > > > > > > > ignoring the Pause frames from the OLT. This
> > > > > > means that the
> > > > > > > > > > > > only way the OLT can truly enforce the SLA is to
> > > > > > be able to
> > > > > > > > > > > > discard the frames that exceed the bandwidth
> > > > agreed to in
> > > > > > > > > > > > the SLA. If the OLT is capable of this, why even
> > > > > > bother with
> > > > > > > > > > > > Pause frames?
> > > > > > > > > > >
> > > > > > > > > > >You forget two things:
> > > > > > > > > > >1. The bursty nature of traffic and the fact
> > that peak is
> > > > > > > > > greater than the
> > > > > > > > > > >committed
> > > > > > > > > > >rate of service
> > > > > > > > > > >2. That networks by definition protect
> > > > themselves i.e. can
> > > > > > > > > not rely on
> > > > > > > > > > >subscriber
> > > > > > > > > > >alone
> > > > > > > > > > >
> > > > > > > > > > >If the subscriber exceeds its SLA then yes,
> > frames would
> > > > > > > > > be dropped. But
> > > > > > > > > > >if it's just
> > > > > > > > > > >a burst, i.e. on average the subscriber is
> > in compliance
> > > > > > > > > then buffering
> > > > > > > > > > >and Pause
> > > > > > > > > > >should do the job.
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Sorry for being long winded but I'm trying to
> > > > > > make a logical
> > > > > > > > > > > > argument. What assumptions did I make that
> > > > aren't valid?
> > > > > > > > > > > >
> > > > > > > > > > > > Thanks,
> > > > > > > > > > > > Ben
> > > > > > > > > > > >
> > > > > > > > > > > > Siamack Ayandeh wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > > Shahram,
> > > > > > > > > > > > >
> > > > > > > > > > > > > It would be helpful to this discussion if you
> > > > > > > > > indicate what you had
> > > > > > > > > > > in mind
> > > > > > > > > > > > > with regard to OAM frames so one can think of a
> > > > > > pragmatic
> > > > > > > > > > > answer.  For example
> > > > > > > > > > > > > if you are worried about Pause frames:
> > In this case
> > > > > > > > > the SONET/SDH
> > > > > > > > > > > (OLT1-OLT2)
> > > > > > > > > > > > > is often the bottleneck link. So Pause is
> > > > used on the
> > > > > > > > > local link to
> > > > > > > > > > > protect the
> > > > > > > > > > > > > OLT-1/2 buffers. If the egress ONU back
> > > > pressures the
> > > > > > > > > network, then
> > > > > > > > > > > OLT can
> > > > > > > > > > > > > simply buffer and subsequently drop packets.
> > > > > > > > > Otherwise fairly large
> > > > > > > > > > > buffers
> > > > > > > > > > > > > would be required to absorb the round
> > trip time of
> > > > > > > > > the wide area.  If
> > > > > > > > > > > you think
> > > > > > > > > > > > > about it as a two port bridge, again
> > Pause is not
> > > > > > > > > propagated over the
> > > > > > > > > > > wide
> > > > > > > > > > > > > area. If you look at various IETF
> > > > Pseudowire flavors,
> > > > > > > > > again following
> > > > > > > > > > > the lead
> > > > > > > > > > > > > of IEEE, Pause is not propagated over
> > the wide area.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Siamack
> > > > > > > > > > > > >
> > > > > > > > > > > > > Geoff Thompson wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > > > Matt-
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > To further enrich the information that
> > > > you provided
> > > > > > > > > below....
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > 802.3 has a long, well established
> > > > tradition of not
> > > > > > > > > supporting media
> > > > > > > > > > > > > > converters.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > It would be my opinion that any
> > > > "features" designed
> > > > > > > > > to specifically
> > > > > > > > > > > support
> > > > > > > > > > > > > > media converters were out of scope unless
> > > > they were
> > > > > > > > > specifically
> > > > > > > > > > > mentioned
> > > > > > > > > > > > > > in the PAR.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Geoff
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > At 01:05 AM 2/12/2003 -0500, Matt
> > Squire wrote:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > >My 2 cents.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >If there is a MAC layer in the ONU, then OAM
> > > > > > > > > terminates there.  If a
> > > > > > > > > > > > > > >vendor builds something without a
> > MAC layer, then
> > > > > > > > > it doesn't terminate
> > > > > > > > > > > > > > >there.  If you put MACs in your ONU,
> > > > you're really
> > > > > > > > > building something
> > > > > > > > > > > > > > >akin to a 2-port bridge (likely with
> > STP disabled
> > > > > > > > > > > permanently).  If you
> > > > > > > > > > > > > > >don't, then its more along the lines
> > of a media
> > > > > > > > > converter.  Both
> > > > > > > > > > > models
> > > > > > > > > > > > > > >can work.  Both models can interoperate.
> > > >  So do it
> > > > > > > > > anyway you
> > > > > > > > > > > want, and
> > > > > > > > > > > > > > >maybe the market will agree with you.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >- Matt
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >Shahram Davari wrote:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Roy,
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Since EOS is a private line
> > service, It seems
> > > > > > > > > that you agree
> > > > > > > > > > > with me
> > > > > > > > > > > > > > > and Chak that for the EOS it seems from
> > > > > > > > > architectural point of
> > > > > > > > > > > view the
> > > > > > > > > > > > > > > OAM MAC frames should not be
> > terminated at OLTs.
> > > > > > > > > Is that correct?
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Yours,
> > > > > > > > > > > > > > > > -Shahram
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > > > > > From: Roy Bynum
> > > > [mailto:rabynum@xxxxxxxxxxxxxx]
> > > > > > > > > > > > > > > > > Sent: Tuesday, February 11,
> > 2003 12:26 PM
> > > > > > > > > > > > > > > > > To: Chau, Chak; stds-802-3-efm@ieee.org
> > > > > > > > > > > > > > > > > Subject: RE: [EFM] Question
> > regarding OAM in
> > > > > > > > > 802.3ah D1.3
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Chak,
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Depending on the service
> > definition and who
> > > > > > > > > owns the service
> > > > > > > > > > > > > > > > > facilities,
> > > > > > > > > > > > > > > > > end to end OAM functionality would not
> > > > > > necessarily
> > > > > > > > > > > available.  In all
> > > > > > > > > > > > > > > > > packet services, the service
> > provider would
> > > > > > > > > own at least a
> > > > > > > > > > > > > > > > > portion, if not
> > > > > > > > > > > > > > > > > all of the communications
> > facilities.  The
> > > > > > > > > OAM functionality
> > > > > > > > > > > > > > > > > would then be
> > > > > > > > > > > > > > > > > for the use of the service
> > provider, not the
> > > > > > > > > customer.  Only
> > > > > > > > > > > > > > > > > with a Leased
> > > > > > > > > > > > > > > > > Circuit type of service (also
> > referred to as
> > > > > > > > > "Private Line")
> > > > > > > > > > > > > > > > > would end to
> > > > > > > > > > > > > > > > > end, OLT1 to OLT2 OAM
> > functionality exist.
> > > > > > > > > For all other
> > > > > > > > > > > types of
> > > > > > > > > > > > > > > > > services, the OAM for Link 1 would
> > > > not be the
> > > > > > > > > OAM for Link 2.
> > > > > > > > > > > > > > > > >  Other than
> > > > > > > > > > > > > > > > > with a Leased Circuit service,
> > the services
> > > > > > > > > are defined to
> > > > > > > > > > > > > > > > > alter, filter,
> > > > > > > > > > > > > > > > > or drop customer originated
> > > > frames/packets in
> > > > > > > > > one way or
> > > > > > > > > > > > > > > > > another, including
> > > > > > > > > > > > > > > > > the OAM frames.  This is the gist
> > > > of the work
> > > > > > > > > that is being
> > > > > > > > > > > done by
> > > > > > > > > > > > > > > > > SG15/Q.10 under E.Ethna.  Other
> > than with a
> > > > > > > > > Leased Circuit
> > > > > > > > > > > > > > > > > service, true
> > > > > > > > > > > > > > > > > "transparency" does not exist.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Thank you,
> > > > > > > > > > > > > > > > > Roy Bynum
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > At 10:15 AM 2/11/2003 -0600, Chau,
> > > > Chak wrote:
> > > > > > > > > > > > > > > > > >Hi David and All,
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >I though for a PtP application
> > the OAMPDUs
> > > > > > > > > message should be
> > > > > > > > > > > > > > > > > transparent
> > > > > > > > > > > > > > > > > >form OLT1 to OLT2.
> > > > > > > > > > > > > > > > > >Or else, this will defeat the
> > purpose of
> > > > > > > > > PtP, i.e., no L2 frame
> > > > > > > > > > > > > > > > > >processing. Which means that
> > OAM for Link1
> > > > > > > > > can be OAM for
> > > > > > > > > > > > > > > > > Link2, is that
> > > > > > > > > > > > > > > > > >correct?  This topic may be
> > > > reviewed outside
> > > > > > > > > of EFM if prefered.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >Kind Regards,
> > > > > > > > > > > > > > > > > >Chak
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >Chak Chau
> > > > > > > > > > > > > > > > > >FUJITSU, Transmission Development
> > > > > > > > > > > > > > > > > >Phone: (972) 479-2795
> > > > > > > > > > > > > > > > > >chak.chau@xxxxxxxxxxxxxxx
> > > > > > > > > > > > > > > > > >chakavuth.chau@xxxxxxxxxxxx
> > > > > > > > > > > > > > > > > >-----Original Message-----
> > > > > > > > > > > > > > > > > >From: David Martin
> > > > > > > > > [mailto:dwmartin@xxxxxxxxxxxxxxxxxx]
> > > > > > > > > > > > > > > > > >Sent: Monday, February 10, 2003 2:59 PM
> > > > > > > > > > > > > > > > > >To: stds-802-3-efm@ieee.org
> > > > > > > > > > > > > > > > > >Subject: RE: [EFM] Question
> > > > regarding OAM in
> > > > > > > > > 802.3ah D1.3
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >Shahram,
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >Agreed, the EoS (e.g. GFP-F) mapping
> > > > > > is a simple
> > > > > > > > > > > > > > > > > port-to-port mapping and
> > > > > > > > > > > > > > > > > >doesn't include the full MAC sublayer
> > > > > > > > > processing (i.e. only
> > > > > > > > > > > > > > > > > terminates
> > > > > > > > > > > > > > > > > >IPG, preamble, SFD).
> > Inspecting the MAC DA
> > > > > > > > > and filtering off
> > > > > > > > > > > > > > > > > EFM OAMPDUs
> > > > > > > > > > > > > > > > > >and processing them is required by the
> > > > > > > > > network application,
> > > > > > > > > > > > > > > > > since the
> > > > > > > > > > > > > > > > > >Ethernet link / PHY to which
> > they apply is
> > > > > > > > > terminated. OAM
> > > > > > > > > > > > > > > > > for link 1
> > > > > > > > > > > > > > > > > >cannot be mixed with OAM for
> > link 2 on the
> > > > > > > > > other side of the
> > > > > > > > > > > > > > > > > provider's
> > > > > > > > > > > > > > > > > >network.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >ONU1 --------------
> > > > > > > > > OLT1/GFP------------------ GFP/OLT2
> > > > > > > > > > > > > > > > > ------------ ONU2
> > > > > > > > > > > > > > > > > >           Ethernet
> > > >       SONET
> > > > > > > > > > > > > > > > >       Ethernet
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >It might be more appropriate
> > to continue
> > > > > > > > > this privately, or
> > > > > > > > > > > > > > > > > on the Q.12/15
> > > > > > > > > > > > > > > > > >reflector.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >...Dave
> > > > > > > > > > > > > > > > > >David W. Martin
> > > > > > > > > > > > > > > > > >Nortel Networks
> > > > > > > > > > > > > > > > >
> > ><mailto:dwmartin@xxxxxxxx>dwmartin@xxxxxxxx
> > > > > > > > > > > > > > > > > >+1 613 765-2901 (esn 395)
> > > > > > > > > > > > > > > > > >~~~~~~~~~~~~~~~~~~~~
> > > > > > > > > > > > > > > > > >-----Original Message-----
> > > > > > > > > > > > > > > > > >From: Shahram Davari
> > > > > > > > > [mailto:Shahram_Davari@xxxxxxxxxxxxxx]
> > > > > > > > > > > > > > > > > >Sent: Monday, February 10, 2003 3:16 PM
> > > > > > > > > > > > > > > > > >To: Martin, David [SKY:QW10:EXCH];
> > > > > > > > > stds-802-3-efm@ieee.org
> > > > > > > > > > > > > > > > > >Subject: RE: [EFM] Question
> > > > regarding OAM in
> > > > > > > > > 802.3ah D1.3
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >David,
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >I like to agree with you, but
> > from layering
> > > > > > > > > architectural
> > > > > > > > > > > > > > > > > point of view,
> > > > > > > > > > > > > > > > > >the EOS box does not have to
> > implement MAC
> > > > > > > > > > > > > > > > > >layer (i.e., do any MAC
> > lookup), rather a
> > > > > > > > > P-2-P EOS is a
> > > > > > > > > > > > > > > > > kind of port
> > > > > > > > > > > > > > > > > >transport in which all traffic
> > coming form
> > > > > > > > > an Ethernet port
> > > > > > > > > > > > > > > > > are send over
> > > > > > > > > > > > > > > > > >a specific SONET channel.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >Please see further comments in-line:
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >Thanks,
> > > > > > > > > > > > > > > > > >-Shahram
> > > > > > > > > > > > > > > > > >-----Original Message-----
> > > > > > > > > > > > > > > > > >From: David Martin
> > > > > > > > > [mailto:dwmartin@xxxxxxxxxxxxxxxxxx]
> > > > > > > > > > > > > > > > > >Sent: Monday, February 10, 2003 3:00 PM
> > > > > > > > > > > > > > > > > >To: stds-802-3-efm@ieee.org
> > > > > > > > > > > > > > > > > >Subject: RE: [EFM] Question
> > > > regarding OAM in
> > > > > > > > > 802.3ah D1.3
> > > > > > > > > > > > > > > > > >Shahram,
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >This question is somewhat out
> > of scope wrt
> > > > > > > > > EFM, but the
> > > > > > > > > > > > > > > > > answer is yes, the
> > > > > > > > > > > > > > > > > >EFM OAMPDU flow must be
> > terminated at the
> > > > > > > > > Provider Edge.
> > > > > > > > > > > > > > > > > Otherwise it
> > > > > > > > > > > > > > > > > >would flow through the provider's SONET
> > > > > > > > > network and get
> > > > > > > > > > > > > > > > > mixed in with a
> > > > > > > > > > > > > > > > > >separate EFM OAMPDU flow at
> > the far end.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >SD=> Which separate OAMPDU flow?
> > > > do you mean
> > > > > > > > > from ONU2 to OLT2?
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >  Note that you have the terms ONU /
> > > > > > OLT reversed.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >So the ONU is the customer side?
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >This "filter function" is
> > being defined in
> > > > > > > > > the ITU-T SG15 /
> > > > > > > > > > > > > > > > > Q.12 work in
> > > > > > > > > > > > > > > > > >draft G.ethna (was G.etna) and in the
> > > > > > OIF UNI v2.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >Thanks I will have a look.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >The PE-PE, or SONET portion is
> > not an EFM
> > > > > > > > > link, but rather a
> > > > > > > > > > > > > > > > > SONET path,
> > > > > > > > > > > > > > > > > >which has its own OAM (i.e. POH).
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >Agree.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >...Dave
> > > > > > > > > > > > > > > > > >David W. Martin
> > > > > > > > > > > > > > > > > >Nortel Networks
> > > > > > > > > > > > > > > > >
> > ><mailto:dwmartin@xxxxxxxx>dwmartin@xxxxxxxx
> > > > > > > > > > > > > > > > > >+1 613 765-2901 (esn 395)
> > > > > > > > > > > > > > > > > >~~~~~~~~~~~~~~~~~~~~
> > > > > > > > > > > > > > > > > >-----Original Message-----
> > > > > > > > > > > > > > > > > >From: Shahram Davari
> > > > > > > > > [mailto:Shahram_Davari@xxxxxxxxxxxxxx]
> > > > > > > > > > > > > > > > > >Sent: Monday, February 10, 2003 2:13 PM
> > > > > > > > > > > > > > > > > >To: stds-802-3-efm@ieee.org
> > > > > > > > > > > > > > > > > >Subject: [EFM] Question
> > regarding OAM in
> > > > > > > > 802.3ah D1.3
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >Hi,
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >802.3ah section 57 says that the
> > > > OAM defined
> > > > > > > > > is for single
> > > > > > > > > > > link (or
> > > > > > > > > > > > > > > > > >emulated link), and should not
> > be forwarded
> > > > > > > > > by bridges/switches.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >My question is, in case of
> > Ethernet over
> > > > > > > > > SONET transport
> > > > > > > > > > > > > > > > > (GFP + Virtual
> > > > > > > > > > > > > > > > > >concatenation), should the OAMPDU be
> > > > > > > > > terminated at the EOS
> > > > > > > > > > > > > > > > > device or it
> > > > > > > > > > > > > > > > > >should be transparently transported?
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >Consider this example:
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >OLT1 -------------- ONU
> > > > > > 1------------------ ONU 2
> > > > > > > > > > > ------------ OLT 2
> > > > > > > > > > > > > > > > > >           Ethernet               SONET
> > > > > > > > > > > Ethernet
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >Assume OLT1 and OLT2 are the customer
> > > > > > > > > equipments and ONU1
> > > > > > > > > > > > > > > > > and ONU2 are
> > > > > > > > > > > > > > > > > >provider
> > > > > > > > > > > > > > > > > >transport equipments that
> > > > transport Ethernet
> > > > > > > > > over SONET (but
> > > > > > > > > > > > > > > > > don't do any
> > > > > > > > > > > > > > > > > >switching/bridging).
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >In this case should ONU1
> > terminate OAMPDUs
> > > > > > > > > from OLT1 or it
> > > > > > > > > > > > > > > > > should sent
> > > > > > > > > > > > > > > > > >them transparently to OLT2?
> > > > > > > > > > > > > > > > > >In other words is OLT1--ONU1
> > considered a
> > > > > > > > > single link? what
> > > > > > > > > > > > > > > > > about ONU1 to
> > > > > > > > > > > > > > > > > >ONU2, is this also a link?
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >Thanks in advance,
> > > > > > > > > > > > > > > > > >Shahram Davari
> > > > > > > > > > > > > > > > > >Senior Product Research Engineer
> > > > > > > > > > > > > > > > > >R&D Research Ottawa
> > > > > > > > > > > > > > > > > >PMC-Sierra, Inc.
> > > > > > > > > > > > > > > > > >Phone: (613) 271-4018
> > > > > > > > > > > > > > > > > >Fax:   (613) 271-6468
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > -----------------------------------------
> > > > > > > > > > > > Benjamin Brown
> > > > > > > > > > > > AMCC
> > > > > > > > > > > > 200 Minuteman Rd
> > > > > > > > > > > > 3rd Floor
> > > > > > > > > > > > Andover, MA 01810
> > > > > > > > > > > > 978-247-8022 - Work
> > > > > > > > > > > > 603-491-0296 - Cell
> > > > > > > > > > > > 978-247-0024 - Fax
> > > > > > > > > > > > 603-798-4115 - Home Office/Fax
> > > > > > > > > > > > bbrown@xxxxxxxx
> > > > > > > > > > > > -----------------------------------------
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> > > >
> > > > --
> > > > -----------------------------------------
> > > > Benjamin Brown
> > > > AMCC
> > > > 200 Minuteman Rd
> > > > 3rd Floor
> > > > Andover, MA 01810
> > > > 978-247-8022 - Work
> > > > 603-491-0296 - Cell
> > > > 978-247-0024 - Fax
> > > > 603-798-4115 - Home Office/Fax
> > > > bbrown@xxxxxxxx
> > > > -----------------------------------------
> > > >
> >
> >
> > --
> > -----------------------------------------
> > Benjamin Brown
> > AMCC
> > 200 Minuteman Rd
> > 3rd Floor
> > Andover, MA 01810
> > 978-247-8022 - Work
> > 603-491-0296 - Cell
> > 978-247-0024 - Fax
> > 603-798-4115 - Home Office/Fax
> > bbrown@xxxxxxxx
> > -----------------------------------------
> >