Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-3-EPOC] RF Spectrum Ad Hoc



Hi Steve, 

 

Thanks for the feedback. 

 

I will try to call, but the amount of ad-hocs and involved calls as well as
other activities makes it increasingly challenging to attend them. It would
be nice therefore if the discussion as not only limited to the call. Email
reflector is a valid medium for discussion, IMO. 

 

Regards

 

Marek

 

From: Shellhammer, Steve [mailto:sshellha@xxxxxxxxxxxxxxxx] 
Sent: Wednesday, 30 January, 2013 1:35 AM
To: Marek Hajduczenia; STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-3-EPOC] RF Spectrum Ad Hoc

 

Marek,

 

               Next week we will discuss the wording of the straw polls and
then have the straw polls for those on the call.  Can you join the call next
week?

 

               In the CLT the management layers would need to set the
registers via MDIO.  

 

               There is some duplication between MDIO and PLC, which we
discussed on the call this morning.  It may need to be via PLC at startup,
and via OAM to MDIO once up an running.

 

Steve

 

From: Marek Hajduczenia [mailto:marek.hajduczenia@xxxxxx] 
Sent: Tuesday, January 29, 2013 2:21 PM
To: Shellhammer, Steve; STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-3-EPOC] RF Spectrum Ad Hoc

 

Steve, 

 

Is there any way to have the recorded straw-polls clarified? It is unclear
what station they refer to (CLT or CNU) and what it really means "Exclusion
sub-bands are to be configured by MDIO or the PHY Link channel" - does it
mean that CLT configures these parameters on CNU via MDIO (if so, how is
that achieved, really?) or something else happens and PLC delivers this
information from CLT to CNU?

 

Also, since my previous email was ignored so far, I would like to repeat my
two primary questions:

 

Question 1: how is information delivered from management layer (up above
802.3 layers) to PLC? 

 

Question 2: how does PLC interplay with OAM? Functionally, I see overlap
between them . 

 

Regards

 

Marek

 

From: Shellhammer, Steve [mailto:sshellha@xxxxxxxxxxxxxxxx] 
Sent: Tuesday, 29 January, 2013 8:55 PM
To: STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-3-EPOC] RF Spectrum Ad Hoc

 

All,

 

               Here are the minutes from this morning's call.

 

Steve

 

 

  _____  


________________________________________________________________________

To unsubscribe from the STDS-802-3-EPOC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-EPOC&A=1