Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-3-EPOC] Question on FER Objective



All,
I would assume 64-2000 bytes.
Best Regards,
Duane

FutureWei Technologies Inc.
duane.remein@xxxxxxxxxx
Director, Access R&D
919 418 4741
Raleigh, NC

From: Mark Laubach [mailto:laubach@xxxxxxxxxxxx]
Sent: Wednesday, January 30, 2013 4:04 PM
To: STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-3-EPOC] Question on FER Objective

Hi Steve,

Likely we probably all assumed 64 octet to ~1518 octet Ethernet packets and probably should discuss up to 2000 octets.

I'm assuming others will comment on this.

Cheers,
Mark

From: Shellhammer, Steve [mailto:sshellha@xxxxxxxxxxxxxxxx]
Sent: Wednesday, January 30, 2013 10:40 AM
To: STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-3-EPOC] Question on FER Objective

Mark, et. al.,

               In our Objectives it says we have a frame error ratio (rate) of 10^-6 on the downstream and 5x10^-5 on the upstream,

               http://grouper.ieee.org/groups/802/3/bn/EPoC_objectives_update_1115.pdf

               In 802.3 what frame size is used in this objective?

Thanks,
Steve


________________________________

<="" p="">

________________________________

<="" p="">

________________________________________________________________________

To unsubscribe from the STDS-802-3-EPOC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-EPOC&A=1