Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-3-EPOC] PCS structure and draft development contribution



Marek-
A slight modification for the sake of generalization would be in order.

On slide 4 where it says:
"Construct serial bit stream to be fed..."
it should say:
"Construct serial bit stream(s) to be fed..."

and the equivalent change on slide 5,
unless we have a TF decision that all implementations will be purely serial

If we have multiple data streams then de-skewing will also be needed (slide 5)

Best regards,

Geoff

On 13//13 11:25 AM, Marek Hajduczenia wrote:

Dear colleagues,

I recently started looking at the decisions about the PCS operation, structure, etc., and drew blank -- we have not been making too much progress so far. To facilitate the progress going forward, and show what we really need to decide in the first run (really simple stuff, I promise) I prepared a brief contribution looking at how to go through the process of selecting PCS structure, and then defining individual features. The main goal here is to allow the PCS Clause Editor to start drafting and be able to guide the development of the missing features.

Please take a look at the attached slide deck and think ahead of the meeting about the PCS structure for EPoC, what functions we need there. We will be looking for volunteers to drive the development of contributions for individual baseline functions, so if you have experience in any of the PCS functions, please let me know. I will be happy to work with you on a contribution for either upcoming March or next interim meeting in Canada

regards

*Marek Hajduczenia, PhD*
* *
ZTE Portugal
/Standard Development and Industry Relations/
Edifício Amoreiras Plaza,
Rua Carlos Alberto da Mota Pinto, nr. 9 - 6 A,
1070-374 Lisbon, Portugal
/ /
/Office: +351 213 700 090
Fax: + 351 213 813 349
Mobile: +351 961 121 851 (Portugal)/


------------------------------------------------------------------------

________________________________________________________________________

To unsubscribe from the STDS-802-3-EPOC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-EPOC&A=1