Re: [STDS-802-3-EPOC] PCS structure and draft development contribution
Geoff,
A fair observation. I have updated the slides accordingly, per your
suggestion.
Regards
Marek
From: Geoff Thompson [mailto:thompson@xxxxxxxx]
Sent: Friday, 01 March, 2013 10:53 PM
To: Marek Hajduczenia
Cc: STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-3-EPOC] PCS structure and draft development
contribution
Marek-
A slight modification for the sake of generalization would be in order.
On slide 4 where it says:
"Construct serial bit stream to be fed..."
it should say:
"Construct serial bit stream(s) to be fed..."
and the equivalent change on slide 5,
unless we have a TF decision that all implementations will be purely serial
If we have multiple data streams then de-skewing will also be needed (slide
5)
Best regards,
Geoff
On 13//13 11:25 AM, Marek Hajduczenia wrote:
Dear colleagues,
I recently started looking at the decisions about the PCS operation,
structure, etc., and drew blank ? we have not been making too much progress
so far. To facilitate the progress going forward, and show what we really
need to decide in the first run (really simple stuff, I promise) I prepared
a brief contribution looking at how to go through the process of selecting
PCS structure, and then defining individual features. The main goal here is
to allow the PCS Clause Editor to start drafting and be able to guide the
development of the missing features.
Please take a look at the attached slide deck and think ahead of the meeting
about the PCS structure for EPoC, what functions we need there. We will be
looking for volunteers to drive the development of contributions for
individual baseline functions, so if you have experience in any of the PCS
functions, please let me know. I will be happy to work with you on a
contribution for either upcoming March or next interim meeting in Canada
regards
Marek Hajduczenia, PhD
ZTE Portugal
Standard Development and Industry Relations
Edifício Amoreiras Plaza,
Rua Carlos Alberto da Mota Pinto, nr. 9 - 6 A,
1070-374 Lisbon, Portugal
Office: +351 213 700 090
Fax: + 351 213 813 349
Mobile: +351 961 121 851 (Portugal)
_____
________________________________________________________________________
To unsubscribe from the STDS-802-3-EPOC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-EPOC&A=1