Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy sub-task call



Duane, 

 

Data rate limitation is one thing and we will have that given, considering
that we cannot transmit more than the PHY can deliver. 

 

Now, granting granularity is a completely different topic. If you're
transmitting at 100Mbit/s with 2k or 4k granularity, the only difference is
how you grant bandwidth, and that last time that I checked was related with
DBA operation, and not PHY rate . 

 

Marek

 

From: Duane Remein [mailto:Duane.Remein@xxxxxxxxxx] 
Sent: Tuesday, July 02, 2013 6:48 PM
To: Marek Hajduczenia; STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Cc: Duane Remein
Subject: RE: [STDS-802-3-EPOC] Resoruce block presentation in todays phy
sub-task call

 

Marek,

You miss my point. I'm not saying that we write requirements for DBA only
that the standard allow visibility of the transmission granularity of the
PHY to the DBA. This was always a given in all previous Ethernet PHYs
because the PHY rate was typically a single number (10, 100 1000, 10,000,
40,000 or 100,000 Mbps) and only occasionally (auto neg) a small sub-set of
these rates. Also most Ethernet PHYs transmit continueously, however, even
in EPON with burst transmission the granularity of transmission is always
fixed (1 TQ or 16 ns). 

OFDM will obviously not be so simple and easy. Therefore it make sense to me
that the upper layers be aware of the rate the PHY is actually running at
and how granular transmission opportunities are. 

Best Regards,

Duane

 

FutureWei Technologies Inc.

duane.remein@xxxxxxxxxx

Director, Access R&D

919 418 4741

Raleigh, NC

 

From: Marek Hajduczenia [mailto:marek.hajduczenia@xxxxxx] 
Sent: Tuesday, July 02, 2013 1:26 PM
To: Duane Remein; STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-3-EPOC] Resoruce block presentation in todays phy
sub-task call

 

Duane, 

 

DBA definitions and restrictions for its operation are not within the scope
of this project . I am sure you're acutely aware of this, having gone
through P802.3av and participated in similar discussions there 

 

Marek

 

From: Duane Remein [mailto:Duane.Remein@xxxxxxxxxx] 
Sent: Tuesday, July 02, 2013 6:10 PM
To: Marek Hajduczenia; STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Cc: Duane Remein
Subject: RE: [STDS-802-3-EPOC] Resoruce block presentation in todays phy
sub-task call

 

Marek,

I think you've made a very good observation, some grant sizes will be
invalid because we will not have the ability to transmit in 16 ns (TQ)
granularity, OFDMA just isn't as flexible as good ol' optics.  My opinion is
that the upper layers (above the MAC) will need to understand the
granularity that is allowed for in EPoC grants. IF not then you will waste a
great deal of resources because you will need to round down to the nearest
OFDM transmission bucket (or Resource Block as has been proposed in numerous
presentations). 

Think of it this way. You have a CNU with a 2000 byte frame to transmit. The
CLT grants X TQs but the CNU, because of transmission granularity can only
use X-n TQs so nothing gets transmitted. Not a good situation.

Best Regards,

Duane

 

FutureWei Technologies Inc.

duane.remein@xxxxxxxxxx

Director, Access R&D

919 418 4741

Raleigh, NC

 

From: Marek Hajduczenia [mailto:marek.hajduczenia@xxxxxx] 
Sent: Tuesday, July 02, 2013 11:49 AM
To: STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy
sub-task call

 

Avi, 

 

Please note that granting is done in units of TQ, which is also something
that you would need to take into consideration in your calculations. Not all
combinations would be valid. 

 

Furthermore, what you're effectively after is restriction on the size of
grants allocated to the CNU. For that to work, we do not need to introduce
yet another concept into the already loaded draft 

 

Marek

 

From: Avi Kliger [mailto:akliger@xxxxxxxxxxxx] 
Sent: Tuesday, July 02, 2013 4:33 PM
To: STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy
sub-task call

 

Marek, Sanjay 

 

A resource block would be a minimal unit of x symbols and y subcarriers that
can be detected by the receiver. (I prefer to use x for symbols and y for
subcarriers since we are using to the horizontal axis for time and vertical
for frequency).

 

In the latest proposal we had, we assumed y and x can be configurable (per
system, all CNUs using the same RB size), and minimum values for y and x
were 4 and 6, respectively. However we can think of ways to reduce y further
to be a single sub-carrier. 

 

To answer Marek's questions: the conversion between granted times and RBs
would be done by the CNU as part of the 1D to 2D scheduling. As an example,
if the OFDMA symbol is 20 uSec long and has 4000 subcarrier, each
subcarrier/symbol can be translated to 20u/4000 = 5nSec (I am omitting the
CP size for the simplicity of the calculations).  For the case of x*y RBs,
one RB unit is translated too x*y*5nSec, or 120nSec for the case of x=6 and
y=4.  

Partial RBs are not possible. 

The CLT would know the size of the RB as it is a fixed size. 

 

The IFG should probably be configured to the size of at least one RB to
insure no collisions.  

 

Avi

From: Sanjay Goswami [mailto:sanjay.goswami@xxxxxxxxxxxx] 
Sent: Tuesday, July 02, 2013 6:02 PM
To: STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy
sub-task call

 

Marek,

 

Ethernet has a concept of Byte and also has a concept of minimum size of a
frame which can be transmitted to be considered a valid transmission.

 

Resource element and resource block are similar terms used by OFDMA PHY.
They are in no way or shape related to byte or minimum frame size in
Ethernet but conceptually they are similar.

 

My understanding is that a given CNU transmitter requires a minimum x number
of sub-carriers and a minimum y number of symbols for that transmission to
be successfully received at the CLT. 

 

What I see you are stating is that can we get away with a single subcarrier
and a single symbol (called a resource element) as the smallest unit. 

 

Ed's presentation assumed x=1 and y>1 but TBD. I think PHY experts can
answer these questions better

 

1. What is the minimum value for x and y needed for a successful
transmission?

 

2. Given that y is same, does the incremental value of x has to be same or
can it be less?


Regards, 

-Sanjay


On Jul 2, 2013, at 6:02 AM, "Marek Hajduczenia" <marek.hajduczenia@xxxxxx>
wrote:

Avi, 

 

How would that conversion happen? Would it be possible to allocate partial
RBs? How does the CLT know what the size of RB is? This stuff raises just
more questions than it answers. 

 

What is wrong with the design that Ed originally had, i.e., where grants are
converted into carriers without the use of any RBs ?

 

Marek

 

From: Avi Kliger [mailto:akliger@xxxxxxxxxxxx] 
Sent: Tuesday, July 02, 2013 12:46 PM
To: Marek Hajduczenia; STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-3-EPOC] Resoruce block presentation in todays phy
sub-task call

 

Marek,

 

Resource Block (RB) is a structure that is convenient for the PHY
transmissions, and should not be visible to upper layers. The CNU PHY would
get time allocations via grants and would convert them into RBs for
transmission.  RBs are PHY structures with pre-configured number of
sub-carriers and OFDMA symbols, and pilots structure. Pilots are required
for the receiver for time and frequency synchronization and for channel
estimation. 

As I believe there was no intention to redesign the MAC or MPCP in order to
support the RB structure

 

Avi      

 

From: Marek Hajduczenia [mailto:marek.hajduczenia@xxxxxx] 
Sent: Tuesday, July 02, 2013 11:37 AM
To: STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy
sub-task call

 

Dear Sanjay, 

 

Using something in a presentation does not necessarily mean that it is
something we either need, or defined for our own use. I appreciate the
education on this topic, but I am still unclear as to why we need it in the
first place, considering that all allocation in EPON (and EPoC ?) would be
done via grants, which have nothing (absolutely) to do with frequency
allocation. 

 

It is true that CNUs would convert time-based allocation into set of
carriers, but that would be done in a matter transparent to CLT, in which
the CLT does not explicitly allocate specific carriers to the specific CNU. 

 

Now, were we to say that we want to redesign MPCP for the use in EPoC and
provide explicit carrier allocation, the discussion would be different. But
then also we would need a different project, since it is hardly a reuse of
EPON MPCP, but rather its redesign. 

 

Marek

 

From: Sanjay Goswami [mailto:sanjay.goswami@xxxxxxxxxxxx] 
Sent: Tuesday, July 02, 2013 12:17 AM
To: Marek Hajduczenia; STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-3-EPOC] Resoruce block presentation in todays phy
sub-task call

 

Marek,

 

Resource block, resource element, slot are some of terms which are already
defined in other standards related to OFDMA. These terms were used in the
Details on Upstream Pilots and Resource Block Configuration for EPoC
<http://www.ieee802.org/3/bn/public/may13/pietsch_3bn_01_0513.pdf>
presentation by Avi Kliger and Christian Pietsch in May 2013 IEEE 802.3bn
Victoria meeting. In Phy Link Ad-hoc meeting last week, Syed Rahman
presentation focused on efficiency of Upstream Resource blocks.  The
questions all of us are asking revolve around the following:

 

a)      Are we redefining  these terms?

b)      What is the scope of these terms?

 

Both are important questions. My objection was (which I see is also your
objection) related to the scope and visibility of these terms. Changing the
GATE format and making these PHY resources visible to OLT seems to break the
layering rules. It also makes operating with existing equipment in field
much more difficult. In my view, we should not be touching the EPON MAC
layers unless its absolute must.

 

Another important aspect which Duane pointed out is the  visibility of these
PHY terms. The questions is "Are these programmable values in PHY?" If Yes,
then how these are provisioned?

 

I would suggest that since Duane is suggesting these changes, he can bring
up these as Straw Poll in next Phy Link Ad-hoc meeting.

 

Regards

Sanjay

 

 

-----Original Message-----
From: Marek Hajduczenia [mailto:marek.hajduczenia@xxxxxxxxx] 
Sent: Friday, June 28, 2013 3:21 PM
To: STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy
sub-task call

 

Duane, 

 

In EPON, we somehow get away without specifying all that and yet operators

are able to get the most of the EPON systems. Putting too many knobs is a

simple way to overcomplicate the design and then end up with

interoperability problems. I am against putting too much rope out. The

strength of the Ethernet is in simplicity and reliability, and not

complexity and configurability taken to extreme. 

 

Put it in different perspective - what is wrong with the current definition

of a grant, which has nothing to do with frequency bands, allocations etc.

and which was already proposed to be mapped into spectrum without upper

layers being aware of this fact? Are you trying to revert this agreement and

go towards redefinition of GATE MPCPDU structure and its meaning? 

 

Regards

 

Marek

 

-----Original Message-----

From: Duane Remein [ <mailto:Duane.Remein@xxxxxxxxxx>
mailto:Duane.Remein@xxxxxxxxxx] 

Sent: Friday, 28 June 2013 9:31 PM

To:  <mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx>
STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx

Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy

sub-task call

 

Eugene,

If you keep this hidden from 802.3 then there will be no opportunity for the

operator to vary this to account for the network. Is this OK with all

operators? 

I agree that there is no need for the MAC to be aware of this, I don't agree

that the upper DBA layer should necessarily be unaware of this nor that the

operator should not be able to control the RB size via MDIO should they

choose to do so.

Best Regards,

Duane

 

FutureWei Technologies Inc.

 <mailto:duane.remein@xxxxxxxxxx> duane.remein@xxxxxxxxxx

Director, Access R&D

919 418 4741

Raleigh, NC

 

 

-----Original Message-----

From: Dai, Eugene (CCI-Atlanta) [ <mailto:Eugene.Dai@xxxxxxx>
mailto:Eugene.Dai@xxxxxxx] 

Sent: Friday, June 28, 2013 3:38 PM

To:  <mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx>
STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx

Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy

sub-task call

 

I would be careful to introduce a concept such as "resource block" or what

ever you might call it into 802.3bn. "Resource block" make sense in DOCSIS

3.1 OFDM because CMTS completely aware RF PHY. In 802.3bn, CLT/OLT does not

know or aware RF PHY OFDM parameters; the grant is based on TQ. If we go

that far open the door to let CLT/OLT aware OFDM, I am afraid it will

deviate from our original plan too much.

 

Eugene

________________________________________

From: Marek Hajduczenia [marek.hajduczenia@xxxxxx]

Sent: Friday, June 28, 2013 10:48 AM

To:  <mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx>
STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx

Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy

sub-task call

 

Duane,

 

My point is much simpler - if this new thing is essentially a grant, why not

use "grant" rather than create a new term for it ?

 

Marek

 

From: Duane Remein [ <mailto:Duane.Remein@xxxxxxxxxx>
mailto:Duane.Remein@xxxxxxxxxx]

Sent: Friday, 28 June 2013 3:22 PM

To:  <mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx>
STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx

Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy

sub-task call

 

Marek,

I would welcome your input on how to make a less confusing definition. I

would have no problem replacing GATE with grant.

Best Regards,

Duane

 

FutureWei Technologies Inc.

 <mailto:duane.remein@xxxxxxxxxx> duane.remein@xxxxxxxxxx

Director, Access R&D

919 418 4741

Raleigh, NC

 

From: Marek Hajduczenia [ <mailto:marek.hajduczenia@xxxxxx>
mailto:marek.hajduczenia@xxxxxx]

Sent: Friday, June 28, 2013 5:42 AM

To: Duane Remein;  <mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx>
STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx

Subject: RE: [STDS-802-3-EPOC] Resoruce block presentation in todays phy

sub-task call

 

Duane,

 

Such a definition is confusing at best - you seem to assume that we allocate

specific range of spectrum via GATE message, and we can do so only in time

domain. We also do have a term already in GATE - "grant" - and I am not sure

why we need to define yet another one to speak about apparently the very

same thing.

 

Marek

 

From: Duane Remein [ <mailto:Duane.Remein@xxxxxxxxxx>
mailto:Duane.Remein@xxxxxxxxxx]

Sent: Thursday, 27 June 2013 10:38 PM

To:  <mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx>
STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx

Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy

sub-task call

 

I agree we havn't a formal definition. I would purpose something like: "a

set of sub-carriers connected in time related in frequency, but not

necessarily contigeous in frequency, allocated by a single GATE message".

 

Best Regards,

Duane

 

FutureWei Technologies Inc.

 <mailto:duane.remein@xxxxxxxxxx%3cmailto:duane.remein@xxxxxxxxxx>
duane.remein@xxxxxxxxxx<mailto:duane.remein@xxxxxxxxxx>

Director, Access R&D

919 418 4741

Raleigh, NC

 

From: Avi Kliger [ <mailto:akliger@xxxxxxxxxxxx>
mailto:akliger@xxxxxxxxxxxx]

Sent: Thursday, June 27, 2013 1:48 AM

To:

 
<mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx%3cmailto:STDS-802-3-EPOC@LISTSERV.
IEEE.ORG>
STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx<mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx>

Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy

sub-task call

 

In the joint upstream pilot contribution by QCOM+BRCM we described what we

called a RB. It wasn't a "formal" definition though.

 

From: Marek Hajduczenia [ <mailto:marek.hajduczenia@xxxxxx>
mailto:marek.hajduczenia@xxxxxx]

Sent: Thursday, June 27, 2013 1:46 AM

To:

 
<mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx%3cmailto:STDS-802-3-EPOC@LISTSERV.
IEEE.ORG>
STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx<mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx>

Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy

sub-task call

 

Thank you for confirmation, Syed,

 

It is hard for me then to understand proposals towards such an undefined

entity .... Is anybody actually planning to define this term ?

 

Marek

 

From: Syed Rahman [ <mailto:Syed.R@xxxxxxxxxx> mailto:Syed.R@xxxxxxxxxx]

Sent: Wednesday, 26 June 2013 11:24 PM

To:

 
<mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx%3cmailto:STDS-802-3-EPOC@LISTSERV.
IEEE.ORG>
STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx<mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx>

Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy

sub-task call

 

Marek,

 

*         To the best of my knowledge, so far we have not decided on a

formal resource block definition.

 

*         There have been multiple presentations which talked about resource

blocks for different applications (pilots, burst markers, et cetra..)

 

*         Attached is one such presentation

Thanks,

Syed

 

From: Marek Hajduczenia [ <mailto:marek.hajduczenia@xxxxxx>
mailto:marek.hajduczenia@xxxxxx]

Sent: Wednesday, June 26, 2013 2:45 PM

To:

 
<mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx%3cmailto:STDS-802-3-EPOC@LISTSERV.
IEEE.ORG>
STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx<mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx>

Subject: Re: [STDS-802-3-EPOC] Resoruce block presentation in todays phy

sub-task call

 

Dear colleagues,

 

Have we ever really generated a consented definition of the whole "resource

block"? I have been looking through a number of contributions and it seems

that it is kind of give, yet I must have missed a formal definition of what

this really is. Could anybody point to where it was defined (if it was done

before) or try to come up with a consistent definition of what this is (at

best, relative to EPON for simpler comprehension) ?

 

Thank you in advance

 

Marek

 

From: Syed Rahman [ <mailto:Syed.R@xxxxxxxxxx> mailto:Syed.R@xxxxxxxxxx]

Sent: Wednesday, 26 June 2013 9:05 PM

To:

 
<mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx%3cmailto:STDS-802-3-EPOC@LISTSERV.
IEEE.ORG>
STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx<mailto:STDS-802-3-EPOC@xxxxxxxxxxxxxxxxx>

Subject: [STDS-802-3-EPOC] Resoruce block presentation in todays phy

sub-task call

 

 

 

All,

Attached is the presentation I gave  in today's Phys sub-task force call.

Thanks,

Syed

 

________________________________

 

<="" p="">

 

________________________________

 

<="" p="">

 

________________________________

 

________________________________

 

<="" p="">

 

________________________________

 

<="" p="">

 

________________________________

 

________________________________

 

<="" p="">

 

________________________________

 

________________________________________________________________________

 

To unsubscribe from the STDS-802-3-EPOC list, click the following link:

 <https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-EPOC&A=1>
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-EPOC&A=1

 

________________________________________________________________________

 

To unsubscribe from the STDS-802-3-EPOC list, click the following link:

 <https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-EPOC&A=1>
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-EPOC&A=1

 

________________________________________________________________________

 

To unsubscribe from the STDS-802-3-EPOC list, click the following link:

 <https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-EPOC&A=1>
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-EPOC&A=1

 

 


  _____  


<="" p="">

 


  _____  


<="" p=""> 

 

  _____  

<="" p=""> 

 

  _____  

<="" p=""> 

 

  _____  

<="" p="">


________________________________________________________________________

To unsubscribe from the STDS-802-3-EPOC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-EPOC&A=1