|Thread Links||Date Links|
|Thread Prev||Thread Next||Thread Index||Date Prev||Date Next||Date Index|
Dear EC Members, This is an email ballot of 10 day duration on the following motion: To approve the attached press release prepared by IEEE-SA staff announcing the approval of the P802.11p PAR. Moved: Stuart Kerry Second: Bob Heile It opens 11PM edt 12OCT and closes 11PM edt 22 October. Regards, --Paul Nikolich IEEE 802 Chairman ----- Original Message ----- From: <firstname.lastname@example.org> To: <email@example.com> Cc: <firstname.lastname@example.org>; <email@example.com>; <firstname.lastname@example.org>; <email@example.com>; <firstname.lastname@example.org> Sent: Tuesday, October 12, 2004 8:51 PM Subject: RE: RE: IEEE P802.11p news release > > Paul, > > It looks fine to me with Karen's tidy up work. Please start the motion in > the 802 ExCom. > > As previously stated Bob Heile seconds this motion. > > Thanks, > > Stuart > > > > _______________________________ > > > > Stuart J. Kerry > > Chair, IEEE 802.11 WLANs WG > > > > Philips Semiconductors, Inc. > > 1109 McKay Drive, M/S 48A SJ, > > San Jose, CA 95131-1706, > > United States of America. > > > > Ph : +1 (408) 474-7356 > > Fax: +1 (408) 474-5343 > > Cell: +1 (408) 348-3171 > > eMail: email@example.com > > _______________________________ > > > > > -----Original Message----- > From: firstname.lastname@example.org [mailto:email@example.com] > Sent: Tuesday, October 12, 2004 5:25 PM > To: Stuart Kerry; firstname.lastname@example.org > Cc: email@example.com > Subject: Re: Fw: IEEE P802.11p news release > > > Hello, > We gave the release a good editorial scrub and attached is the clean > version. Please note, since we have described/qualified IEEE P802.11p as a > "standard development project" and " a draft standard amendment" under > development in the first two paragraphs of the release, we can comfortably > refer (and in proper PR style) to it as "IEEE P802.11p" in the remainder > of > the release--to stay consistent, streamlined and avoid introducing > confusion by limiting interchanging "standard development project" and > "draft standard amendment" as qualifiers (the use of these was getting a > bit overwhelming)--especially since the remainder of the release couches > the standard project in terms of being under development, etc. > > Thanks! > Karen > > (See attached file: PR_P802.11pV3.doc) > > Karen McCabe > Senior Marketing Manager, IEEE Standards > 445 Hoes Lane, PO Box 1331 > Piscataway NJ 08855 USA > PH: +1 732 562 3824 > email: firstname.lastname@example.org > http://standards.ieee.org > Think Standards! Think IEEE! > > > > > "Paul Nikolich" > > <paul.nikolich@at To: > <email@example.com>, <firstname.lastname@example.org> > > t.net> cc: > > Subject: Fw: IEEE P802.11p > news release > 10/12/2004 02:08 > > PM > > Please respond to > > "Paul Nikolich" > > > > > > > > > > Karen, > > Please give this PR once last editorial scrub, create a new clean version, > and send it to Stuart for review. > > Stuart, once you approve the clean version, please try to get an EC > seconder > and I'll issue the EC ballot. > > Regards, > > --Paul > > ----- Original Message ----- > From: <email@example.com> > To: <firstname.lastname@example.org>; <email@example.com> > Cc: <firstname.lastname@example.org>; <email@example.com>; <firstname.lastname@example.org>; > <email@example.com> > Sent: Friday, October 08, 2004 4:41 PM > Subject: RE: IEEE P802.11p news release > > >> >> >> Paul and Karen, >> >> I have modified the press release to show that the contact for the > working >> group is the WG Chair only. With that done, I am happy with the rest of >> the release. Therefore I move this motion to you as the 802 ExCom Chair, >> and for you to call for a second to begin discussion and subsequent >> approval process in an 802 ExCom Electronic Ballot of the committee >> members. >> >> / Stuart >> >> P.S. Modified release attached >> >> -----Original Message----- >> From: Paul Nikolich [mailto:firstname.lastname@example.org] >> Sent: Friday, October 08, 2004 10:11 AM >> To: email@example.com; firstname.lastname@example.org >> Cc: email@example.com; firstname.lastname@example.org; email@example.com >> Subject: Re: IEEE P802.11p news release >> >> Karen, >> >> Before we send this out to the EC for approval I made several > corrections >> and added a quote from me. The corrections are mostly making sure to > the >> reader that it is clear that a PROJECT was approved to develop a DRAFT >> STANDARD. We need to be careful in the future to ensure we maintain > this >> distinction in future releases of approved projects. >> >> If I have not included all the right people on this email for review and >> approval of my suggested changes, please include the necessary > individuals >> >> and then resubmit the request for an EC motion to me. >> >> Also, just to be clear, the EC motion needs to be made and seconded by 2 >> EC >> members (typically the WG Chair and another). I cannot begin a ballot >> without that. >> >> Regards, >> >> --Paul >> >> >> ----- Original Message ----- >> From: <firstname.lastname@example.org> >> To: <email@example.com> >> Cc: <firstname.lastname@example.org>; <email@example.com>; <firstname.lastname@example.org> >> Sent: Friday, October 08, 2004 10:36 AM >> Subject: IEEE P802.11p news release >> >> >>> Hi Paul, >>> Working with Lee Armstrong we have developed a news release on the > start >> >>> on >>> the IEEE 802.11p standard. It's attached and "ready" for the EC > approval >>> process. >>> >>> Thanks! >>> Karen >>> >>> (See attached file: PR_P802.11pV1.doc) >>> >>> >>> >>> >>> Karen McCabe >>> Senior Marketing Manager, IEEE Standards >>> 445 Hoes Lane, PO Box 1331 >>> Piscataway NJ 08855 USA >>> PH: +1 732 562 3824 >>> email: email@example.com >>> http://standards.ieee.org >>> Think Standards! Think IEEE! >>> >> > (See attached file: SJK Modified PR_P802 11pV2.doc) > > > > > ---------- This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.