Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802SEC] +++EC Email Ballot+++ Motion for Network Equipment Upgradesl+++ends 19 August 2005



Pat,  I didn't say you couldn't remove the card and re-insert it (especially with power off).  I said you would not have to redo the SW install (or de-install) that is required the first time you insert the card.  As far as I can see if the card is removed you will have no Wireless connection capability but it comes right back whenever the card is reinserted.  No configuration changes are required.  

Thanx,  Buzz
Dr. Everett O. (Buzz) Rigsbee
Boeing - SSG
PO Box 3707, M/S: 7M-FM
Seattle, WA  98124-2207
(425) 865-2443    Fx: (425) 865-6721
Cell: (425) 417-1022
everett.o.rigsbee@boeing.com



-----Original Message-----
From: Pat Thaler [mailto:pat_thaler@AGILENT.COM] 
Sent: Monday, July 25, 2005 12:31 PM
To: STDS-802-SEC@listserv.ieee.org
Subject: Re: [802SEC] +++EC Email Ballot+++ Motion for Network Equipment Upgradesl+++ends 19 August 2005


Buzz, 

I think most people will find that they still have to swap the card in and out even when it is tri-mode. The problem is that the antenna sticks out (on all but one brand where it is able to recess into the card) so you can't leave it in when you take the card in and out of your briefcase. Even if you have the room for the card to stick out, the stress on the card while stored eventually degrades the antenna connection.

Pat

-----Original Message-----
From: Rigsbee, Everett O [mailto:everett.o.rigsbee@BOEING.COM] 
Sent: Monday, 25 July, 2005 10:46 AM
To: STDS-802-SEC@listserv.ieee.org
Subject: Re: [802SEC] +++EC Email Ballot+++ Motion for Network Equipment Upgradesl+++ends 19 August 2005

Matt,  I'm aware of lots of "horror stories"  with early provider products.  And Dell's D600 problem is well known and solved by doing a BIOS upgrade.  The reason we are recommending the Tri-Mode card is so you don't have to be swapping it in and out, which is where all the problems come in.  With a new Tri-Mode card you install once and then just use it wherever.  
Part of our proposal is that our experienced Network Service Vendor, VeriLAN, will hand out the new cards and provide support for those wishing to upgrade, so that we avoid 95% of the pitfalls that way.  They will ensure things like required BIOS Upgrades are made prior to attempting installation.  

I know we can't expect 100% trouble-free upgrades, but if we do out homework we should be able to minimize the problem scenarios to a few simple work-arounds.  

Thanx,  Buzz
Dr. Everett O. (Buzz) Rigsbee
Boeing - SSG
PO Box 3707, M/S: 7M-FM
Seattle, WA  98124-2207
(425) 865-2443    Fx: (425) 865-6721
Cell: (425) 417-1022
everett.o.rigsbee@boeing.com



-----Original Message-----
From: Sherman, Matthew J. (US SSA) [mailto:matthew.sherman@baesystems.com] 
Sent: Monday, July 25, 2005 9:47 AM
To: Rigsbee, Everett O; STDS-802-SEC@listserv.ieee.org
Subject: RE: [802SEC] +++EC Email Ballot+++ Motion for Network Equipment Upgradesl+++ends 19 August 2005


Frankly I have an 802.11a card and rarely use it.  I find that the integrated 802.11g card in my primary laptop works fine normally, so it is more trouble than it is worth to reach into my bag to install and configure the 11a card.  It may be convenient for the network provider to use 802.11a, but less so for the user.  

I'll note, that when I ran this 11a card under WIN2K the 802.11a it regularly crashed my computer, which is why I rarely used it.  I could never get the card provider to fix the problem.  It works fine under XP I believe, but if someone else wound up with this network card (which would cause random crashes on my machine often losing significant data under WIN2K) I can see the liability issues. 

I have another card that runs fine in any computer except a Dell D600 (which of course is all we field at work).  While it does not cause system crashes it freezes the machine completely until you eject the card.  The funny thing is that while it is apparently a Dell design flaw, only certain network cards exhibit the problem.  There is a particular reference design that I find this problem follows.  I think I purchased the first cards based on that reference design.  I complained to the provider of those cards and (after several months) they developed a work around.  I recently purchased a card from a different provider that I know is based on the same reference design since as soon as I popped it into my D600 exhibited the same exact symptoms.  I started to complain to the card provider, but quickly realized this was going to be another 4 month cycle of finger pointing, so I never even bothered to get a fix.  It happens to be a fantastic design except for that one bug (whi!
 !  ch actually is in the computer, not the card), so I just don't use that card in any of my D600's.  I do sometimes plug in that card (which I need a little extra range) when I'm on the road.

Moral of the story - There's a lot of gotya's out there.  Be very wary!

Mat

PS - Somehow I feel there should be a Bugs Bunny joke after that last line...

Matthew Sherman, Ph.D.
Senior Member Technical Staff
BAE SYSTEMS, CNIR
Office: +1 973.633.6344
email: matthew.sherman@baesystems.com
-----Original Message-----
From: Rigsbee, Everett O [mailto:everett.o.rigsbee@BOEING.COM] 
Sent: Monday, July 25, 2005 12:27 PM
To: STDS-802-SEC@listserv.ieee.org
Subject: Re: [802SEC] +++EC Email Ballot+++ Motion for Network Equipment
Upgradesl+++ends 19 August 2005

John,  I believe the motion gives permission to acquire the 802.11a modules and direction for us to come up with a proposal for how to proceed on encouraging 802.11a usage (whether it is FREE or not) and certainly your option would be one of those considered.  Whatever we come up with for the latter the EC will have a final review and approve before we do anything.  

So let's complete the motion and then explore our options for encouraging 802.11a usage.  

Thanx,  Buzz
Dr. Everett O. (Buzz) Rigsbee
Boeing - SSG
PO Box 3707, M/S: 7M-FM
Seattle, WA  98124-2207
(425) 865-2443    Fx: (425) 865-6721
Cell: (425) 417-1022
everett.o.rigsbee@boeing.com



-----Original Message-----
From: John Hawkins [mailto:jhawkins@NORTEL.COM] 
Sent: Monday, July 25, 2005 5:38 AM
To: STDS-802-SEC@listserv.ieee.org
Subject: Re: [802SEC] +++EC Email Ballot+++ Motion for Network Equipment
Upgradesl+++ends 19 August 2005


I'm not sure there's a mechanism for this now that the ballot is out but... Can we hold off on this a few days?

I have a potential source for FREE APs. I'm trying to determine with Tim, whether they would measure up to his standards. They are A/B/G's, SNMP manageable, etc... but the devil's in the details.

And best of all they will be FREE! ! !

Can I have a few days to look into this?

(the budget needs all the help it can get).

john

P.S. If this offer for FREE APs doesn't come to pass, I still have some reservations (even though I agreed to second). I would want to see a budget (no blank checks please) and I still have reservations about giving away wireless cards (again, budget, and liability concerns).

john


-----Original Message-----
From: Paul Nikolich [mailto:paul.nikolich@ATT.NET] 
Sent: Sunday, July 24, 2005 6:49 PM
To: STDS-802-SEC@listserv.ieee.org
Subject: [802SEC] +++EC Email Ballot+++ Motion for Network Equipment
Upgradesl+++ends 19 August 2005


Dear EC Members,

This is a email ballot to make a determination on the below motion.

Motion: 
"Whereas our Network Manager, Tim Godfrey, has recommended that we proceed with acquisition of the 802.11a modules for our Cisco 1200 APs that are not currently so equipped, and that we make an effort to encourage our attendees to migrate to 802.11a for reduced congestion:  
 

I move that we proceed to acquire those additional 802.11a modules (20), and further that we investigate a promotional deal to encourage more of our attendees to upgrade to Tri-Mode (802.11b, 11g, 11a) interface cards, which would also allow us to regulate client transmit power levels in dense configurations.  Terms of deal will be reviewed with the Network Services Advisory Committee, and presented for final approval by the 802 EC prior to implementation." 


Moved: Rigsbee
Second: Hawkins

The ballot opens 7PM ET Sunday 24 July 2005 and closes Friday 19 August 2005 
2005.

Regards,

--Paul Nikolich


----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.

----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.

----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.

----------
This email is sent from the 802 Executive Committee email reflector.  This list is maintained by Listserv.

----------
This email is sent from the 802 Executive Committee email reflector.  This list is maintained by Listserv.

----------
This email is sent from the 802 Executive Committee email reflector.  This list is maintained by Listserv.