Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802SEC] +++Motion for P802.3-2005/Cor1 Conditional Approval



I vote approve.

Best Regards,
-Vivek

> -----Original Message-----
> From: ***** IEEE 802 Executive Committee List ***** [mailto:STDS-802-
> SEC@ieee.org] On Behalf Of Grow, Bob
> Sent: Wednesday, April 19, 2006 12:35 PM
> To: STDS-802-SEC@listserv.ieee.org
> Subject: [802SEC] +++Motion for P802.3-2005/Cor1 Conditional Approval
> 
> Colleagues:
> 
> Per agreement at the closing EC meeting in March, the following motion
> for five-day ballot has been moved and seconded.
> 
> Grant conditional approval for submittal of P802.3-2005/Cor1 to RevCom
> per Clause 20 of the LMSC P&P.
> 
> Moved:  Bob Grow
> Seconded:  Roger Marks
> 
> BACKGROUND
> 
> If the one negative balloter converts their vote to Approve with
> comment, no recirculation ballot need be conducted as no substantive
> changes have been made to the draft.  If the negative balloter desires
> their comment and rebuttal to be reviewed by the ballot group a
> recirculation will be conducted on that one comment.  I will report
per
> the conditions in Clause 20 in either case.
> 
> Ballot Open Date: 03/10/2006
> Ballot Close Date: 04/10/2006
> 
> Response Rate
> This ballot has met the 75% returned ballot requirement.
> 103 eligible people in this ballot group.
> 79 affirmative votes
> 1 negative votes with comments
> 0 negative votes without comments
> 2 abstention votes
> 82 votes received =   80 % returned
> 2 % abstention
> 
> Approval Rate
> The 75% affirmation requirement is being met.
> 79 affirmative votes
> 1 negative votes with comments
> 80 votes = 99% affirmative
> 
> Comments
> 5 comments received
> One omega symbol in the draft is displayed as an alpha character
because
> of incorrect font.  The identical text occurs three times in the
draft,
> twice with the omega symbol (for ohms) and once with an alpha
character.
> 
> The editor will add spaces to change a few unit occurrences from "Vdc"
> to "V dc" per IEEE style
> Some front matter (not part of the approved draft/standard) changes
> recommended by the WG Chair were forwarded to the publication editor
for
> consideration during publication preparation.
> At present, there remains one negative comment that was rejected by
the
> ballot resolution group with rebuttal
> The D2.0 comment file with responses is posted at:
> http://www.ieee802.org/3/au/comments/D2.0/802.3au_D2p0.pdf.
> 

----------
This email is sent from the 802 Executive Committee email reflector.  This list is maintained by Listserv.