Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802SEC] Straw Poll 2: When should P&P revision become effective?



The change should be effective when the modified P&P are posted. 

-----Original Message-----
From: ***** IEEE 802 Executive Committee List *****
[mailto:STDS-802-SEC@ieee.org] On Behalf Of Grow, Bob
Sent: Monday, July 17, 2006 8:36 PM
To: STDS-802-SEC@listserv.ieee.org
Subject: Re: [802SEC] Straw Poll 2: When should P&P revision become
effective?

Mat:

Yes, with modification.

If we make it simply that modifications are not effective until the
modified P&P are posted, then the change would be compatible with the
AudCom/SASB motions.  If people feel compelled to specify were they must
be posted, we state posted or linked on the LMSC web pages.

--Bob Grow  

-----Original Message-----
From: ***** IEEE 802 Executive Committee List *****
[mailto:STDS-802-SEC@ieee.org] On Behalf Of Sherman, Matthew J. (US SSA)
Sent: Monday, July 17, 2006 6:04 AM
To: STDS-802-SEC@listserv.ieee.org
Subject: [802SEC] Straw Poll 2: When should P&P revision become
effective?

Folks,

 

We also had discussions on when approved P&P revision should take
effect.  Everyone present at the P&P review felt it was only once the
revised P&P (or approved change I would assume) is posted.

 

Should we add a modification to our rules that modification to the P&P
become effective when posted to the LMSC website?

 

Thanks,

 

Mat

 

Matthew Sherman, Ph.D. 
Senior Member Technical Staff
BAE SYSTEMS, NES
Office: +1 973.633.6344
email: matthew.sherman@baesystems.com 

 


----------
This email is sent from the 802 Executive Committee email reflector.
This list is maintained by Listserv.

----------
This email is sent from the 802 Executive Committee email reflector.
This list is maintained by Listserv.

----------
This email is sent from the 802 Executive Committee email reflector.  This list is maintained by Listserv.