Re: [802SEC] EC Email Ballot: 802.17b Revised PAR to NesCom
Unfortunately, that particular piece of verbage
made it through WG, 802 and NesCom review back in
2004. It would be nice to fix it, but I won't lose
sleep over it. The title change however is critical.
The check that was done for Sponsor was
to make sure the title matched the current PAR form.
Once it was shown that it did not, we checked the
title of the amendment against the base standard
and discovered that it didn't match right there
The CRG did not look through the rest of the PAR
form in terms of edits, we (wrongly) assumed it
I look forward to you registering a vote.
Michael Takefman email@example.com
Distinguished Engineer, Cisco Systems
Chair IEEE 802.17 Stds WG
3000 Innovation Dr, Ottawa, Canada, K2K 3E8
voice: 613-254-3399 cell:613-220-6991
> -----Original Message-----
> From: ***** IEEE 802 Executive Committee List *****
> [mailto:STDS-802-SEC@ieee.org] On Behalf Of Roger B. Marks
> Sent: Tuesday, September 12, 2006 12:32 AM
> To: STDS-802-SEC@listserv.ieee.org
> Subject: Re: [802SEC] EC Email Ballot: 802.17b Revised PAR to NesCom
> The PAR includes some strange sentences. A particularly difficult one
> "This limits spatial reuse to host stations (e.g. routers)
> attached to the ring and precludes other devices that(eg. bridges)."
> It's a shame you didn't have a chance to fix the other stuff
> while you were fixing the title.
> On Sep 11, 2006, at 07:00 PM, Mike Takefman (tak) wrote:
> > Dear EC Members,
> > The following 10-day ballot was authorized by Paul Nikolich
> and I have
> > been asked to manage it.
> > Background: During Sponsor Ballot (D2.0) a comment was
> received that
> > highlighted a title error in P802.17b as well as its associate PAR
> > form. The Comment Resolution Group voted unanimously
> > (5:0:0) to make a change to title of the standard and to change the
> > PAR form and then run an 802.17 confirmation email ballot and an EC
> > email ballot. You will find attached the new PAR form and you will
> > note the change to the title of the standard is the only change.
> > The reason for requesting this change outside of a plenary
> is that by
> > doing so now, we will just make NesCom's continuous
> processing window
> > for this cycle and will allow us to forward 802.17b to
> RevCom during
> > the November plenary.
> > I ran an 802.17 email ballot and all voting members replied in the
> > affirmative (10:0:0) and John Hawkins agreed to second the
> > motion.
> > Move that the 802 EC forwards the revised PAR for P802.17b
> to NesCom
> > for continuous processing in time for the September 23rd cutoff.
> > Moved: Takefman
> > Seconded: Hawkins
> > Ballot starts September 11, 2006 (9pm Eastern) Ballot ends
> > 21, 2006 (11:59pm AOE)
> > thank you,
> > mike
> > -------------------------------------------
> > Michael Takefman firstname.lastname@example.org
> > Distinguished Engineer, Cisco Systems
> > Chair IEEE 802.17 Stds WG
> > 3000 Innovation Dr, Ottawa, Canada, K2K 3E8
> > voice: 613-254-3399 cell:613-220-6991
> > ----------
> > This email is sent from the 802 Executive Committee email
> > This list is maintained by Listserv.
> > <P802_17b_Sep06_PAR.pdf>
> This email is sent from the 802 Executive Committee email
> reflector. This list is maintained by Listserv.
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.