Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802SEC] Procedure 19 report for IEEE P802.3at DTE Power via MDI to Sponsor Ballot

Dear EC members,

At the November 2008 IEEE 802 Plenary meeting conditional approval was 
grated to forward IEEE P802.3at DTE Power via MDI to Sponsor Ballot. This 
email is to report that the conditions have been met. Details are provide 
in the attached report but in summary the response to the Clause 19 
‘Procedure for Conditional Approval to Forward a Draft Standard’ items are 
as follows:

a) The recirculation and resolution occurred essentially 
   in accordance of the plan presented.

b) The approval rate after resolution of the ballot is 
   greater than 75% and there were no new negative

c) No technical changes have being made.

d) There were no new valid DISAPPROVE comments.

e) There were two new DISAPPROVE comments ruled invalid
   by the WG chair.

Based on the above I will be opening the sponsor ballot shortly.

Best regards,
David Law
IEEE 802.3 Working Group Chair

Attachment: IEEE802d3at_proc19_report.pdf
Description: Binary data