Re: [802SEC] +++ EC Ballot closing Saturday Dec 21 - press release motion regarding 802.11ac publication +++
I vote APPROVE.
From: ***** IEEE 802 Executive Committee List ***** [mailto:STDS-802-SEC@ieee.org] On Behalf Of Bruce Kraemer
Sent: 11 December 2013 20:30
Subject: [802SEC] +++ EC Ballot closing Saturday Dec 21 - press release motion regarding 802.11ac publication +++
Dear EC members,
During a November EC plenary I introduced a planned press release regarding the pending publication of 802.11ac.
I received no EC comments but Interproser has updated/polished the press release as attached.
RevCom and the Standards Board approved the publication today. Expected publication is December 28 2013.
Release is targeted for CES during the first week of January.
Paul has authorized me to conduct a 10 day eballot on the motion below..
= = = = = = = = = = = = = = = = = = =
Motion for 10 day ballot:
Start of ballot: Wednesday 11th December 2013
Close of ballot: Saturday 21th December 2013 11:59PM AOE
The EC approves release of the 802.11ac publication press announcement after notification of publication.
Moved: Bruce Kraemer
Seconded: Jon Rosdahl
Early close: As required in subclause 4.1.2 'Voting Rules' of the IEEE project 802 LAN/MAN Standards Committee
(LMSC) Operations Manual (v15 As approved 19 July 2013) , this is notice that
this ballot may close early once sufficient responses are received to clearly decide a matter.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
4.1.2 Voting rules
At times, it may become necessary for the Sponsor to render a decision that cannot be made prior
to the close of one plenary but must be made prior to the opening of the following plenary. Such
decisions may be made using electronic balloting. Provision shall be made for the IEEE 802
LMSC membership to observe and comment on Sponsor electronic ballots. All comments from
those who are not members of the Sponsor shall be considered. Commenters who are not
members of the Sponsor are urged to seek a Voting Member of the Sponsor (normally their WG
or TAG Chair) to include the viewpoint of the commenter in their vote.
The Sponsor Chair, or a Sponsor member designated by the Sponsor Chair (usually a Vice
Chair), shall determine the duration of the ballot, issue the ballot by e-mail and tally the votes
after the ballot is closed. Sponsor Voting Members shall return their vote and comments by
The minimum duration of an electronic ballot shall be 10 days1. For urgent matters once
sufficient response is received to clearly decide a matter, the ballot may be closed early. This
allows a decision to be reach in less than 10 days. Ballots where the possibility of an early close
exists must be clearly marked accordingly. Otherwise, the tally of votes shall not be made until at
least 24 hours after the close of the ballot to allow time for delivery of the e-mail votes.
---------- This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.