LLDP-EXT-DOT3-V2-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifGeneralInformationGroup FROM IF-MIB lldpV2Extensions, lldpV2LocPortIfIndex, lldpV2RemTimeMark, lldpV2RemLocalIfIndex, lldpV2RemLocalDestMACAddress, lldpV2RemIndex, lldpV2PortConfigEntry FROM LLDP-V2-MIB LldpV2PowerPortClass FROM LLDP-V2-TC-MIB; lldpV2Xdot3MIB MODULE-IDENTITY LAST-UPDATED "200906080000Z" -- June 08, 2009 ORGANIZATION "IEEE 802.1 Working Group" CONTACT-INFO "WG-URL: http://grouper.ieee.org/groups/802/1/index.html WG-EMail: STDS-802-1-L@LISTSERV.IEEE.ORG Contact: Tony Jeffree Postal: 11a Poplar Grove Sale Cheshire M33 3AX UK Tel: +44-161-973-4278 E-mail: tony@jeffree.co.uk" DESCRIPTION "The LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpV2Xdot3MIB is branched from lldpV2Extensions using OUI value as the node. An OUI/'company_id' is a 24 bit globally unique assigned number referenced by various standards. Unless otherwise indicated, the references in this MIB module are to IEEE 802.1AB-2009. Copyright (C) IEEE (2009). This version of this MIB module is published as Annex F.6.5 of IEEE Std 802.1AB-2009; see the standard itself for full legal notices." REVISION "200906080000Z" -- June 08, 2009 DESCRIPTION "Published as part of IEEE Std 802.1AB-2009 revision. This revision incorporated changes to the MIB to support the use of LLDP with multiple destination MAC addresses, and to deprecate the Link Aggregation TLV (now moved to the 802.1 extension MIB)." -- OUI for IEEE 802.3 is 4623 (00-12-0F) ::= { lldpV2Extensions 4623 } ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ -- -- Organizationally Defined Information Extension - IEEE 802.3 -- ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ lldpV2Xdot3Objects OBJECT IDENTIFIER ::= { lldpV2Xdot3MIB 1 } -- LLDP IEEE 802.3 extension MIB groups lldpV2Xdot3Config OBJECT IDENTIFIER ::= { lldpV2Xdot3Objects 1 } lldpV2Xdot3LocalData OBJECT IDENTIFIER ::= { lldpV2Xdot3Objects 2 } lldpV2Xdot3RemoteData OBJECT IDENTIFIER ::= { lldpV2Xdot3Objects 3 } ------------------------------------------------------------------------------ -- IEEE 802.3 - Configuration ------------------------------------------------------------------------------ -- -- Version 2 of lldpV2Xdot3PortConfigTable -- supports use of multiple destination MAC addresses -- lldpV2Xdot3PortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpV2Xdot3PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that controls selection of LLDP TLVs to be transmitted on individual ports." ::= { lldpV2Xdot3Config 1 } lldpV2Xdot3PortConfigEntry OBJECT-TYPE SYNTAX LldpV2Xdot3PortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "LLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpV2Xdot3PortConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system." AUGMENTS { lldpV2PortConfigEntry } ::= { lldpV2Xdot3PortConfigTable 1 } LldpV2Xdot3PortConfigEntry ::= SEQUENCE { lldpV2Xdot3PortConfigTLVsTxEnable BITS } lldpV2Xdot3PortConfigTLVsTxEnable OBJECT-TYPE SYNTAX BITS { macPhyConfigStatus(0), powerViaMDI(1), unused(2), --avoids re-use of the old link agg bit number maxFrameSize(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The lldpV2Xdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV. The bit 0 is not used since there is no corresponding subtype. The bit 'macPhyConfigStatus(0)' indicates that LLDP agent should transmit 'MAC/PHY configuration/status TLV'. The bit 'powerViaMDI(1)' indicates that LLDP agent should transmit 'Power via MDI TLV'. The bit 'unused(2)' is no longer used; this was used for the 'Link Aggregation TLV' in the previous version. The bit 'maxFrameSize(3)' indicates that LLDP agent should transmit 'Maximum-frame-size TLV'. The default value for lldpV2Xdot3PortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object is restored from non-volatile storage after a re-initialization of the management system." REFERENCE "9.1.2.1" DEFVAL { { } } ::= { lldpV2Xdot3PortConfigEntry 1 } ------------------------------------------------------------------------------ -- IEEE 802.3 - Local Device Information ------------------------------------------------------------------------------ --- --- lldpV2Xdot3LocPortTable: Ethernet Port AutoNeg/Speed/Duplex --- Information Table --- V2 modified to be indexed by ifIndex. --- lldpV2Xdot3LocPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpV2Xdot3LocPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent." ::= { lldpV2Xdot3LocalData 1 } lldpV2Xdot3LocPortEntry OBJECT-TYPE SYNTAX LldpV2Xdot3LocPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular port component." INDEX { lldpV2LocPortIfIndex } ::= { lldpV2Xdot3LocPortTable 1 } LldpV2Xdot3LocPortEntry ::= SEQUENCE { lldpV2Xdot3LocPortAutoNegSupported TruthValue, lldpV2Xdot3LocPortAutoNegEnabled TruthValue, lldpV2Xdot3LocPortAutoNegAdvertisedCap OCTET STRING, lldpV2Xdot3LocPortOperMauType Unsigned32 } lldpV2Xdot3LocPortAutoNegSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation." REFERENCE "F.2.1" ::= { lldpV2Xdot3LocPortEntry 1 } lldpV2Xdot3LocPortAutoNegEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system." REFERENCE "F.2.1" ::= { lldpV2Xdot3LocPortEntry 2 } lldpV2Xdot3LocPortAutoNegAdvertisedCap OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the local system." REFERENCE "F.2.2" ::= { lldpV2Xdot3LocPortEntry 3 } lldpV2Xdot3LocPortOperMauType OBJECT-TYPE SYNTAX Unsigned32(0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer value that indicates the operational MAU type of the given port on the local system. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in IETF RFC 4836 (or subsequent revisions) and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field is 29. For MAU types not listed in RFC 4836 (or subsequent revisions), the value of this field shall be set to zero." REFERENCE "F.2.3" ::= { lldpV2Xdot3LocPortEntry 4 } --- --- --- lldpV2Xdot3LocPowerTable: Power Ethernet Information Table --- V2 modified to be indexed by ifIndex. --- --- lldpV2Xdot3LocPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpV2Xdot3LocPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per port of power ethernet information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent." ::= { lldpV2Xdot3LocalData 2 } lldpV2Xdot3LocPowerEntry OBJECT-TYPE SYNTAX LldpV2Xdot3LocPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular port component." INDEX { lldpV2LocPortIfIndex } ::= { lldpV2Xdot3LocPowerTable 1 } LldpV2Xdot3LocPowerEntry ::= SEQUENCE { lldpV2Xdot3LocPowerPortClass LldpV2PowerPortClass, lldpV2Xdot3LocPowerMDISupported TruthValue, lldpV2Xdot3LocPowerMDIEnabled TruthValue, lldpV2Xdot3LocPowerPairControlable TruthValue, lldpV2Xdot3LocPowerPairs Unsigned32, lldpV2Xdot3LocPowerClass Unsigned32 } lldpV2Xdot3LocPowerPortClass OBJECT-TYPE SYNTAX LldpV2PowerPortClass MAX-ACCESS read-only STATUS current DESCRIPTION "The value that identifies the port Class of the given port associated with the local system." REFERENCE "F.3.1" ::= { lldpV2Xdot3LocPowerEntry 1 } lldpV2Xdot3LocPowerMDISupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The truth value used to indicate whether the MDI power is supported on the given port associated with the local system." REFERENCE "F.3.1" ::= { lldpV2Xdot3LocPowerEntry 2 } lldpV2Xdot3LocPowerMDIEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The truth value used to identify whether MDI power is enabled on the given port associated with the local system." REFERENCE "F.3.1" ::= { lldpV2Xdot3LocPowerEntry 3 } lldpV2Xdot3LocPowerPairControlable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the local system." REFERENCE "F.3.1" ::= { lldpV2Xdot3LocPowerEntry 4 } lldpV2Xdot3LocPowerPairs OBJECT-TYPE SYNTAX Unsigned32(1|2) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the local system." REFERENCE "F.3.2" ::= { lldpV2Xdot3LocPowerEntry 5 } lldpV2Xdot3LocPowerClass OBJECT-TYPE SYNTAX Unsigned32(1|2|3|4|5) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the local system." REFERENCE "F.3.3" ::= { lldpV2Xdot3LocPowerEntry 6 } --- --- --- lldpV2Xdot3LocMaxFrameSizeTable: Maximum Frame Size information --- V2 modified to be indexed by ifIndex. --- --- lldpV2Xdot3LocMaxFrameSizeTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpV2Xdot3LocMaxFrameSizeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent." ::= { lldpV2Xdot3LocalData 3 } lldpV2Xdot3LocMaxFrameSizeEntry OBJECT-TYPE SYNTAX LldpV2Xdot3LocMaxFrameSizeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maximum Frame Size information about a particular port component." INDEX { lldpV2LocPortIfIndex } ::= { lldpV2Xdot3LocMaxFrameSizeTable 1 } LldpV2Xdot3LocMaxFrameSizeEntry ::= SEQUENCE { lldpV2Xdot3LocMaxFrameSize Unsigned32 } lldpV2Xdot3LocMaxFrameSize OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer value indicating the maximum supported frame size in octets on the given port of the local system." REFERENCE "F.4.1" ::= { lldpV2Xdot3LocMaxFrameSizeEntry 1 } ------------------------------------------------------------------------------ -- IEEE 802.3 - Remote Devices Information ------------------------------------------------------------------------------ --- --- --- lldpV2Xdot3RemPortTable: Ethernet Information Table --- V2 modified to be indexed by ifIndex and destination MAC address. --- --- lldpV2Xdot3RemPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpV2Xdot3RemPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Ethernet port information (as a part of the LLDP 802.3 organizational extension) of the remote system." ::= { lldpV2Xdot3RemoteData 1 } lldpV2Xdot3RemPortEntry OBJECT-TYPE SYNTAX LldpV2Xdot3RemPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular physical network connection." INDEX { lldpV2RemTimeMark, lldpV2RemLocalIfIndex, lldpV2RemLocalDestMACAddress, lldpV2RemIndex } ::= { lldpV2Xdot3RemPortTable 1 } LldpV2Xdot3RemPortEntry ::= SEQUENCE { lldpV2Xdot3RemPortAutoNegSupported TruthValue, lldpV2Xdot3RemPortAutoNegEnabled TruthValue, lldpV2Xdot3RemPortAutoNegAdvertisedCap OCTET STRING, lldpV2Xdot3RemPortOperMauType Unsigned32 } lldpV2Xdot3RemPortAutoNegSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation." REFERENCE "F.2.1" ::= { lldpV2Xdot3RemPortEntry 1 } lldpV2Xdot3RemPortAutoNegEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system." REFERENCE "F.2.1" ::= { lldpV2Xdot3RemPortEntry 2 } lldpV2Xdot3RemPortAutoNegAdvertisedCap OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the remote system." REFERENCE "F.2.2" ::= { lldpV2Xdot3RemPortEntry 3 } lldpV2Xdot3RemPortOperMauType OBJECT-TYPE SYNTAX Unsigned32(0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer value that indicates the operational MAU type of the sending device. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in in IETF RFC 4836 (or subsequent revisions) and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field is 29. For MAU types not listed in RFC 4836 (or subsequent revisions), the value of this field shall be set to zero." REFERENCE "F.2.3" ::= { lldpV2Xdot3RemPortEntry 4 } --- --- --- lldpV2Xdot3RemPowerTable: Power Ethernet Information Table --- V2 modified to be indexed by ifIndex and destination MAC address. --- --- lldpV2Xdot3RemPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpV2Xdot3RemPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains Ethernet power information (as a part of the LLDP 802.3 organizational extension) of the remote system." ::= { lldpV2Xdot3RemoteData 2 } lldpV2Xdot3RemPowerEntry OBJECT-TYPE SYNTAX LldpV2Xdot3RemPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular physical network connection." INDEX { lldpV2RemTimeMark, lldpV2RemLocalIfIndex, lldpV2RemLocalDestMACAddress, lldpV2RemIndex } ::= { lldpV2Xdot3RemPowerTable 1 } LldpV2Xdot3RemPowerEntry ::= SEQUENCE { lldpV2Xdot3RemPowerPortClass LldpV2PowerPortClass, lldpV2Xdot3RemPowerMDISupported TruthValue, lldpV2Xdot3RemPowerMDIEnabled TruthValue, lldpV2Xdot3RemPowerPairControlable TruthValue, lldpV2Xdot3RemPowerPairs Unsigned32, lldpV2Xdot3RemPowerClass Unsigned32 } lldpV2Xdot3RemPowerPortClass OBJECT-TYPE SYNTAX LldpV2PowerPortClass MAX-ACCESS read-only STATUS current DESCRIPTION "The value that identifies the port Class of the given port associated with the remote system." REFERENCE "F.3.1" ::= { lldpV2Xdot3RemPowerEntry 1 } lldpV2Xdot3RemPowerMDISupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system." REFERENCE "F.3.1" ::= { lldpV2Xdot3RemPowerEntry 2 } lldpV2Xdot3RemPowerMDIEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The truth value used to identify whether MDI power is enabled on the given port associated with the remote system." REFERENCE "F.3.1" ::= { lldpV2Xdot3RemPowerEntry 3 } lldpV2Xdot3RemPowerPairControlable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the remote system." REFERENCE "F.3.1" ::= { lldpV2Xdot3RemPowerEntry 4 } lldpV2Xdot3RemPowerPairs OBJECT-TYPE SYNTAX Unsigned32(1|2) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the remote system." REFERENCE "F.3.2" ::= { lldpV2Xdot3RemPowerEntry 5 } lldpV2Xdot3RemPowerClass OBJECT-TYPE SYNTAX Unsigned32(1|2|3|4|5) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the remote system." REFERENCE "F.3.3" ::= { lldpV2Xdot3RemPowerEntry 6 } --- --- lldpV2Xdot3RemMaxFrameSizeTable: Maximum Frame Size information --- V2 modified to be indexed by ifIndex and destination MAC address. --- --- lldpV2Xdot3RemMaxFrameSizeTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpV2Xdot3RemMaxFrameSizeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per port/destination address pair of maximum frame size information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system." ::= { lldpV2Xdot3RemoteData 3 } lldpV2Xdot3RemMaxFrameSizeEntry OBJECT-TYPE SYNTAX LldpV2Xdot3RemMaxFrameSizeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maximum Frame Size information about a particular port component." INDEX { lldpV2RemTimeMark, lldpV2RemLocalIfIndex, lldpV2RemLocalDestMACAddress, lldpV2RemIndex } ::= { lldpV2Xdot3RemMaxFrameSizeTable 1 } LldpV2Xdot3RemMaxFrameSizeEntry ::= SEQUENCE { lldpV2Xdot3RemMaxFrameSize Unsigned32 } lldpV2Xdot3RemMaxFrameSize OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system." REFERENCE "F.4.1" ::= { lldpV2Xdot3RemMaxFrameSizeEntry 1 } ------------------------------------------------------------------------------ -- Conformance Information ------------------------------------------------------------------------------ lldpV2Xdot3Conformance OBJECT IDENTIFIER ::= { lldpV2Xdot3MIB 2 } lldpV2Xdot3Compliances OBJECT IDENTIFIER ::= { lldpV2Xdot3Conformance 1 } lldpV2Xdot3Groups OBJECT IDENTIFIER ::= { lldpV2Xdot3Conformance 2 } -- compliance statements lldpV2Xdot3TxRxCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "A compliance statement for SNMP entities that implement the LLDP 802.3 organizational extension MIB. This group is mandatory for all agents that implement the LLDP 802.3 organizational extension in TX and/or RX mode. This version defines compliance requirements for V2 of the LLDP MIB." MODULE -- this module MANDATORY-GROUPS { lldpV2Xdot3ConfigGroup, ifGeneralInformationGroup } ::= { lldpV2Xdot3Compliances 1 } lldpV2Xdot3TxCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the LLDP 802.3 organizational extension MIB. This group is mandatory for agents which implement the LLDP 802.3 organizational extension in the TX mode. This version defines compliance requirements for V2 of the LLDP MIB." MODULE -- this module MANDATORY-GROUPS { lldpV2Xdot3LocSysGroup } ::= { lldpV2Xdot3Compliances 2 } lldpV2Xdot3RxCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the LLDP 802.3 organizational extension MIB. This group is mandatory for agents which implement the LLDP 802.3 organizational extension in the RX mode. This version defines compliance requirements for V2 of the LLDP MIB." MODULE -- this module MANDATORY-GROUPS { lldpV2Xdot3RemSysGroup } ::= { lldpV2Xdot3Compliances 3 } -- MIB groupings lldpV2Xdot3ConfigGroup OBJECT-GROUP OBJECTS { lldpV2Xdot3PortConfigTLVsTxEnable } STATUS current DESCRIPTION "The collection of objects which are used to configure the LLDP 802.3 organizational extension implementation behavior. " ::= { lldpV2Xdot3Groups 1 } lldpV2Xdot3LocSysGroup OBJECT-GROUP OBJECTS { lldpV2Xdot3LocPortAutoNegSupported, lldpV2Xdot3LocPortAutoNegEnabled, lldpV2Xdot3LocPortAutoNegAdvertisedCap, lldpV2Xdot3LocPortOperMauType, lldpV2Xdot3LocPowerPortClass, lldpV2Xdot3LocPowerMDISupported, lldpV2Xdot3LocPowerMDIEnabled, lldpV2Xdot3LocPowerPairControlable, lldpV2Xdot3LocPowerPairs, lldpV2Xdot3LocPowerClass, lldpV2Xdot3LocMaxFrameSize } STATUS current DESCRIPTION "The collection of objects which are used to represent LLDP 802.3 organizational extension Local Device Information. " ::= { lldpV2Xdot3Groups 2 } lldpV2Xdot3RemSysGroup OBJECT-GROUP OBJECTS { lldpV2Xdot3RemPortAutoNegSupported, lldpV2Xdot3RemPortAutoNegEnabled, lldpV2Xdot3RemPortAutoNegAdvertisedCap, lldpV2Xdot3RemPortOperMauType, lldpV2Xdot3RemPowerPortClass, lldpV2Xdot3RemPowerMDISupported, lldpV2Xdot3RemPowerMDIEnabled, lldpV2Xdot3RemPowerPairControlable, lldpV2Xdot3RemPowerPairs, lldpV2Xdot3RemPowerClass, lldpV2Xdot3RemMaxFrameSize } STATUS current DESCRIPTION "The collection of objects which are used to represent LLDP 802.3 organizational extension Local Device Information. " ::= { lldpV2Xdot3Groups 3 } END