Hi Carol,
Get it. I will do the following.
Go ahead and use 103 for Supported Groups and 104 for 6GHz Extended Regulatory Info.
Best,
Po-Kai
From: Carol Ansley <carol@xxxxxxxxxx>
Sent: Wednesday, July 29, 2026 3:52 PM
To: Huang, Po-kai <po-kai.huang@xxxxxxxxx>
Cc: STDS-802-11-EDITORS@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-EDITORS] ANA Assignments for REVmf
Hi Po-Kai,
I think when I created the table, I stopped on the end of a page using an earlier draft, not noticing at the time that it went on on the next page.
Looking at your draft on the server, 102 is the last entry and no one else has asked for any new values. Go ahead and use 103 for Supported Groups and 104 for 6GHz Extended Regulatory Info.
Sorry for the late response, I was on PTO today and just happened to check my emails this evening.
Regards,
Carol
On Tue, Jul 28, 2026 at 4:57 PM Huang, Po-kai <po-kai.huang@xxxxxxxxx> wrote:
Hi Carol,
Thanks. One thing to check with you. For the Beacon frame body order, are the assigned values 45 and 46 accurate?
Note that 45 and 46 are already sued by other elements in revmf.
Best,
Po-Kai
From: *** IEEE stds-802-11-editors List *** <STDS-802-11-EDITORS@xxxxxxxxxxxxxxxxx> On Behalf Of Carol Ansley
Sent: Tuesday, July 28, 2026 1:20 PM
To: STDS-802-11-EDITORS@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-EDITORS] ANA Assignments for REVmf
--- This message came from the IEEE 802.11 Editors' Reflector ---
Hello Po-Kai and Edward,
I combined your requests since they were both for REVmf. Please see the attached spreadsheet with the assignments.
Let me know if you see any issues with the assignments.
Regards,
Carol
To unsubscribe from the STDS-802-11-EDITORS list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-EDITORS&A=1
To unsubscribe from the STDS-802-11-EDITORS list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-EDITORS&A=1