| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi Wook bong  A few more comments:  1.      LO requirements are copied from 11ax but we have new BW320. Suggest to keep that TBD. 2.      Need to rows for 4K QAM 3.      Need to add # of frames, # of symbols, # of PPDU  for measurements  Thanks, Ron   From: Wook Bong Lee [mailto:wookbong.lee@xxxxxxxxxxx]  Thanks Yujin. I accepted and uploaded new revision.  Best regards, Wook Bong Lee From: Yujin Noh [mailto:yujin.noh@xxxxxxxxxxxx]  Hi, Wookbook and MJ  Thank you for sharing and updating the document.  Some modification in the attached. It is very minor, so you may want to apply it when additional updates are implemented.  Regards, Yujin  From: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>  Hi Youhan,  Thank you for your comment.  MJ made updates based on your comment.  Please take a look at whether you have further comments or not.  It is uploaded to the server as well.
Wook Bong Lee  From: Youhan Kim [mailto:youhank@xxxxxxxxxxxxxxxxx]  Hi, Wookbook and MJ. Thanks for the nice work. Please see my comments attached. For 1253.  Regards, Youhan  From: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>  CAUTION: This email originated from outside of the organization. Hi all,  I just uploaded draft text proposal for PDT-PHY- Transmit specification: Clock frequency and modulation accuracy. 11-20/1252r0 PDT-PHY-Frequency Tolerance 11-20/1253r0 PDT-PHY-Modulation Accuracy  Please let us know if you have any comment.  Thanks MJ for your work.  Best regards, Wook Bong Lee   From: Wook Bong Lee  Hello all, This is for PHY- Transmit specification: Clock frequency and modulation accuracy. As you can find in 11ax spec, we have following two sections for this.
 There is one motion for these sections, i.e. 802.11be supports -38 dB as the Tx EVM requirement for 802.11be 4096 QAM. [Motion 112, #SP20, [9] and [70]]  I have few things to discuss. For those thing, I am thinking we can make it TBD. Will write a contribution to discuss that.  Other than that, mostly it will be similar to 11ax.  MJ kindly volunteered for writing above sections. He will share draft when it is ready.  If you have any suggestion, please let us know. Best regards, Wook Bong Lee To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature