Hi Edward,
Thank you for your feedback.
I was following the examples in baseline (REVmd) spec.
For example, the Neighbor Report IE or MBSSID IE has a range up to 255.
Is there a reason why we can’t go beyond 220?
I noticed 222-255 are reserved for both cases.
Below snipped from Neighbor Report IE:
Regards,
Abhi
Ps: I believe your feedback applies to doc 1272 (Multi-Link element) – not the power-save document (1270) – is that correct?
From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: Thursday, September 10, 2020 8:36 AM
To: Abhishek Patil <appatil@xxxxxxxxxxxxxxxx>
Cc: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT MAC MLO Power-save procedures
CAUTION: This email originated from outside of
the organization.
Hi Abhi,
Not sure if the members have provided you the following feedback on the following table:
|
Subelement ID |
Name |
Extensible |
|
0 |
Per-STA Profile |
No |
|
1–255 |
Reserved |
|
|
221 |
Vendor Specific |
Vendor defined |
|
222–255 |
Reserved |
|
For the second entry "Reserved", is the range of Subelement ID "1-220" rather than "1-255"?
Please kindly advise.
Regards,
Edward
On Mon, Aug 24, 2020 at 11:50 PM Abhishek Patil <appatil@xxxxxxxxxxxxxxxx> wrote:
Hello to all TTT members for MLO power-save procedures,
I have posted document 11-20/1270 which provides draft text for MLO power save procedures.
https://mentor.ieee.org/802.11/dcn/20/11-20-1270-00-00be-pdt-mac-mlo-power-save-procedures.docx
Could you please review and let me know if you have any inputs?
Regards,
Abhi
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1