| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hello Ron I just copy the cited motions in Yan’s PDT document, it does not say 80+80 and 160+160 are TBD. Based on the guideline from the Chair Alfred, we
should stick to the motions. Otherwise, we should amend the existing motion or run another one to replace it. We amended a MAC motion after we found it is not proper, hope you could learn from it.
By the way when we discussed a PDT document in a MAC meeting, I was little surprised at what Youhan commented-“80+80 and 160+160 should be TBD”,
conflicting with a passed MAC motion. A 160 MHz tone plan is duplicated for the non-OFDMA tone plan of 320/160+160
MHz PPDU.
·
The 160 MHz tone plan is TBD. [Motion 18, [5] and [16]] 12 and 11 null tones are placed at the left and right edges in each 160 MHz segment for the non-OFDMA tone plan
of 320/160+160 MHz PPDU. [Motion 19, [5] and [16]] 802.11be reuses 802.11ax tone plan for 20/40 MHz PPDU and, with the exception of pilot locations, for 80/160/80+80
MHz in non-OFDMA PPDU. For 320 MHz and 160+160 MHz PPDU, 802.11be uses duplicated EHT160. [Motion 33, [5] and [9]] The 802.11be 320/160+160
MHz non-OFDMA tone plan uses duplicated tone plan of EHT160. [Motion 34, [5] and [9]] [Motion 118, [10] and [11]] 802.11be reuses 802.11ax tone plan for 20/40 MHz PPDU and, with the exception of pilot locations, for 80/160/80+80
MHz in non-OFDMA PPDU. For 320 MHz and 160+160 MHz PPDU, 802.11be uses duplicated EHT160. [Motion 33, [5] and [9]] [Motion 118, [10] and [11]] Best wishes Ming Gan 发件人: Ron Porat [mailto:000009a0da80e877-dmarc-request@xxxxxxxxxxxxxxxxx]
Hi Yan, Thanks for your efforts here. A couple more typos in
34.3.2.2: "For an EHT PPDU using non-OFDMA transmission..": 80+80MHz and 160+160MHz EHT PPDU should be marked TBD For 26-tone RU 33 in 160M EHT PPDU, the tone indices should be "[-118:-93]" instead of "[118:-93]" Thanks, Ron From: Yan Xin [mailto:Yan.Xin@xxxxxxxxxx]
Hi TTT members and all: A revision 1371r4 was uploaded to the server. Please review it and let me know your comments/suggestions. Thanks, Yan.
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |