Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] PDT for NS/EP Priority Access



Hi all,

 

I have uploaded rev10.

This version addresses the following comments:

1. Soft AP MLD is one type of AP MLD that is in a batter powered device;

2. Soft AP MLD uses the same antenna connectors (RF chains) as a set of Non-AP STAs with/without non-AP MLD functionality.

 

https://mentor.ieee.org/802.11/dcn/20/11-20-1407-10-00be-pdt-mac-mlo-soft-ap-mld-operation.docx

 

Regards,

Kaiying

From: Das, Subir [mailto:sdas@xxxxxxxxxxxxxxxxx]
Sent: Sunday, September 27, 2020 6:48 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT for NS/EP Priority Access

 

I have uploaded rev5. This version addresses the comments that were received during presentation and also from offline exchanges.

 

https://mentor.ieee.org/802.11/dcn/20/11-20-1434-05-00be-pdt-for-ns-ep-priority-access.docx

 

 

Regards,

_Subir

 

From: Das, Subir
Sent: Thursday, September 24, 2020 4:23 PM
To: 'STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx' <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>
Subject: RE: PDT for NS/EP Priority Access

 

Based on the comments received yesterday and from offline exchanges, I have upload rev4.

 

https://mentor.ieee.org/802.11/dcn/20/11-20-1434-04-00be-pdt-for-ns-ep-priority-access.docx

 

Thanks again for your comments and support.

 

Regards,

_Subir

 

From: Das, Subir
Sent: Tuesday, September 22, 2020 9:39 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: PDT for NS/EP Priority Access

 

Rev3 is now uploaded.

https://mentor.ieee.org/802.11/dcn/20/11-20-1434-03-00be-pdt-for-ns-ep-priority-access.docx

 

Yangbo, Zhiqiang: Based on your comments, we have clarified the text.  

 

Thanks to the folks that have provided valuable offline comments.  

 

Regards,

_Subir

 

 

 

From: Das, Subir
Sent: Monday, September 21, 2020 2:05 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: PDT for NS/EP Priority Access

 

We have uploaded rev2.

 

https://mentor.ieee.org/802.11/dcn/20/11-20-1434-02-00be-pdt-for-ns-ep-priority-access.docx

 

Thanks again for your review/comments and support.

 

Regards,

_Subir

 

From: Das, Subir
Sent: Thursday, September 17, 2020 10:25 AM
To: 'STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx' <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>
Subject: RE: PDT for NS/EP Priority Access

 

Thanks to the members that have reviewed rev0 and provided good comments.

We have uploaded rev1.

 

https://mentor.ieee.org/802.11/revise-document?t=7995000040%7F1

 

Thanks for your support.

 

Regards,

_Subir

 

From: Das, Subir
Sent: Tuesday, September 8, 2020 9:49 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: PDT for NS/EP Priority Access

 

Hello TTT members for NS/EP Priority Access,

I have posted the initial draft text for your review and inputs.

 

https://mentor.ieee.org/802.11/dcn/20/11-20-1434-00-00be-pdt-for-ns-ep-priority-access.docx

 

Regards,

-Subir


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

*********** MEDIATEK Confidentiality Notice ***********
The information contained in this e-mail message (including any 
attachments) may be confidential, proprietary, privileged, or 
otherwise exempt from disclosure under applicable laws. It is 
intended to be conveyed only to the designated recipient(s). Any 
use, dissemination, distribution, printing, retaining or copying 
of this e-mail (including its attachments) by unintended recipient(s) 
is strictly prohibited and may be unlawful. If you are not an 
intended recipient of this e-mail, or believe that you have received 
this e-mail in error, please notify the sender immediately 
(by replying to this e-mail), delete any and all copies of this 
e-mail (including any attachments) from your system, and do not 
disclose the content of this e-mail to any other person. Thank you!

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1