Re: [STDS-802-11-TGBE] TGbe CR submission

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hi Minyoung,

Thanks so much for your response. I have gone through the references to the resolutions you have provided. The current spec just says that a non-AP MLD cannot operate in EMLSR and EMLMR mode at the same time. And provides rules on how to set the EMLSR Mode and EMLMR Mode subfields in the EML Operating mode notification frame accordingly. The following three sentences are the resolutions for the CIDs you have just cited.

“The EMLSR Mode subfield is set to 0 if the EMLMR Mode subfield is set to 1”

“A non-AP MLD that does not support enhanced multi-link single radio operation (see 35.3.16 (Enhanced multi-link single radio operation)) sets the EMLSR Mode subfield to 0”

“A non-AP MLD that does not support enhanced multi-link multi-radio operation (see 35.3.17 (Enhanced multi-link multi-radio operation)) sets the EMLMR Mode subfield to 0”

A device not being able to operate on both modes simultaneously is not the same as saying the device cannot support both modes, right? I disagree that from the above three sentences we can infer the below newly proposed sentence in doc 11-22/1181.

“(#11453)A non-AP MLD with dot11EHTEMLSROptionImplemented equal to true shall have dot11EHTEMLMROptionImplemented equal to false.”

Please kindly let me know if I am missing anything here.

Best

Rubayet

From: Minyoung Park <mpark.ieee@xxxxxxxxx>
Sent: Tuesday, August 2, 2022 1:05 AM
To: Rubayet Shafin <r.shafin@xxxxxxxxxxx>
Cc: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

Hi Rubayet,

I can defer that CID but the group already reached consensus and motion passed on that topic as below for the comments (CID: 7842, 7843, 4008, 6563, 6564, 7563, 7564) the group received in the previous CC36.

REVISED
Agree with the comment. The statement is revised to make it more readable. Furthermore, since the support for the two modes are mutually exclusive, when one mode is set to 1 the other is set to 0. This is clarified in the text as a resolution for CID 7843.

TGbe editor: Please implement all changes tagged as 7563 as shown in doc 11-21/1703r1 (https://mentor.ieee.org/802.11/dcn/21/11-21-1703-01-00be-cr-for-cids-related-to-emlsr-in-clause-9.docx).

Regards,

Minyoung

On Mon, Aug 1, 2022 at 11:47 AM Rubayet Shafin <r.shafin@xxxxxxxxxxx> wrote:

Hi Minyoung,

Could you please also defer CID 11453? EMLSR and EMLMR are modes of operation and a device with multiple radios can possibly support both.

Best

Rubayet

From: Minyoung Park <mpark.ieee@xxxxxxxxx>
Sent: Tuesday, August 2, 2022 12:22 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

Caution: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Hi Gaurang,

Sure, I can defer that CID. We can have a separate discussion on that.

Regards,

Minyoung

On Mon, Aug 1, 2022 at 11:00 AM Gaurang Naik <gnaik@xxxxxxxxxxxxxxxx> wrote:

Hi Minyoung,

Could you please defer the resolution for CID 12812?

I don't agree with the proposed resolution. The behavior for EMLSR was agreed after considerable discussions and looking at several use cases. Now it seems like we are doing case-by-case optimization, which significantly adds to the complexity at the AP without much gains.

Thanks,

Gaurang

From: Minyoung Park <mpark.ieee@xxxxxxxxx>
Sent: Friday, July 22, 2022 5:52 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Hi Alfred,

Please add 11-22/1181r0 to the MAC queue (will be ready to review on 1st week of August). The CR doc resolves 31 comments.

Thanks,

Minyoung

On Fri, Jul 22, 2022 at 4:39 PM Yanjun Sun <yanjuns@xxxxxxxxxxxxxxxx> wrote:

Hi Alfred,

Could you help add 22/1177r0 (CR on 35.2.2, 15 CIDs) to the join queue? I’ll upload the document soon.

Thanks

Yanjun

From: Rajat PUSHKARNA <rajat.pushkarna@xxxxxxxxxxxxxxxx>
Sent: Thursday, July 21, 2022 6:59 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Hi Alfred,

Could you please help to add CR document 22/1165r0 resolving comments related to Annex-B to the Joint queue? The document can be found at: https://mentor.ieee.org/802.11/dcn/22/11-22-1165-00-00be-lb266-cr-document-resolving-comments-related-to-annex-b.docx

Thanks.

Best Regards,

Rajat.

From: Yanyi Ding <yanyi.ding@xxxxxxxxxxxxxxxx>
Sent: Friday, 22 July 2022 9:54 am
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

Hi Alfred,

Could you please add the following CR to the joint queue? Thanks.

13-Jul-2022 ET

2022

1120

0

TGbe

LB266 CR for CIDs of 4.3.16a

Yanyi Ding (Panasonic)

19-Jul-2022 22:10:34 ET

Download

Best regards,

Yanyi

From: Yanjun Sun <yanjuns@xxxxxxxxxxxxxxxx>
Sent: Thursday, July 21, 2022 1:58 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

Hi Alfred and all,

Could you help add the following CR to the joint queue?

1124

1

TGbe

LB266 CR for 9.3.1.22 MISC

Download

I’ve revised the resolution based on inputs from Greg, Dibakar, Liwen and Ross. Based on Srini’s inputs, I’ve also added some discussion text on the context.

Thanks

Yanjun

From: 李雅璞(Yapu) <00001b0ec2563bd4-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, July 20, 2022 1:40 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] TGbe PHY CR submission

Hi, Alfred

Could you add the following document to the PHY queue?

20-Jul-2022 ET

2022

1169

0

TGbe

LB266-CR-on-CID 12138-12139-12140

Yapu Li (OPPO)

20-Jul-2022 04:28:05 ET

Download

Thanks

Yapu

发件人: Yan(MSI) Zhang <yan.zhang_5@xxxxxxx>
发送时间: 2022年7月19日 2:55
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBE] TGbe PHY CR submission

Hi Alfred, Siguard, Tianyu,

Can you add the following documents to the PHY queue?

18-Jul-2022 ET

2022

1163

0

TGbe

11be lb266 CR for clause 36.3.14 Packet Extension

Yan Zhang (NXP)

18-Jul-2022 ET

2022

1164

0

TGbe

11be lb266 CR for Clause 36.3.11 Mathematical description of signals

Yan Zhang (NXP)

Thanks

Yan

From: humengshi <0000179fd8c5ace5-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Tuesday, July 12, 2022 5:49 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [EXT] [STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] TGbe PHY ad-hoc Session -Monday PM2- Cancellation Notice

Caution: EXT Email

Hi Alfred,

Could you add the following documents to the PHY queue?

11-Jul-2022 ET

2022

1063

0

TGbe

LB266 CR for 36.3.16 Transmit Requirements

Mengshi Hu (Huawei)

12-Jul-2022 08:37:40 ET

Download, Revise

11-Jul-2022 ET

2022

1064

0

TGbe

LB266 CR for 9.4.2.313.5 EHT PPE Thresholds Field

Mengshi Hu (Huawei)

12-Jul-2022 08:38:18 ET

Download, Revise

11-Jul-2022 ET

2022

1076

0

TGbe

LB266 CR for 36.2.2 RU_ALLOCATION

Mengshi Hu (Huawei)

12-Jul-2022 08:38:44 ET

Download, Revise

Best regards,

Mengshi Hu

发件人: Kanke Wu <kankew@xxxxxxxxxxxxxxxx>
发送时间: 2022年7月12日 12:48
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBE] TGbe PHY ad-hoc Session -Monday PM2- Cancellation Notice

Hi Alfred,

Can you add the following document to the PHY queue?

11-Jul-2022 ET

2022

1080

0

TGbe

LB266 CR on EHT PHY Introduction-1

Kanke Wu (Qualcomm)

12-Jul-2022 00:44:59 ET

Download

Thanks,

Kanke

From: Alfred Asterjadhi <asterjadhi@xxxxxxxxx>
Sent: Monday, July 11, 2022 6:48 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] TGbe PHY ad-hoc Session -Monday PM2- Cancellation Notice

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Hello all,

PHY ad-hoc has finished processing the CR queue and hence Monday PHY PM2 session is cancelled.

Please let us know if you have any submissions to be added to the PHY queue.

Regards,

Alfred

--

Alfred Asterjadhi, PhD

IEEE802.11 TGbe Chair,

Qualcomm Technologies Inc.

asterjadhi@xxxxxxxxx

aasterja@xxxxxxxxxxxxxxxx

Cell #: +1 858 263 9445

Office #: +1 858 658 5302

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

OPPO

本电子邮件及其附件含有OPPO公司的保密信息，仅限于邮件指明的收件人使用（包含个人及群组）。禁止任何人在未经授权的情况下以任何形式使用。如果您错收了本邮件，请立即以电子邮件通知发件人并删除本邮件及其附件。

This e-mail and its attachments contain confidential information from OPPO, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1