Thanks, Jinyoung. From lowest to highest frequency is also a key message in ordering. Can we keep the original and add the tables for further clarification?
The EHT Compressed Beamforming Report information contains the channel matrix elements indexed, first, by matrix angles in order
shown in Table 9-71 (Order of angles in the compressed beamforming feedback matrix when used in a non-S1G band), and second, by data and pilot subcarrier index
from lowest frequency to highest frequency as shown in Table 9-127b, Table 9-127c,
and Table 9-127d.
From: Jinyoung Chun <jiny.chun@xxxxxxx>
Sent: Wednesday, August 24, 2022 5:23 PM
To: Xiaogang Chen <xiaogang.chen@xxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] TGbe CR submission
Hi Xiaogang,
Thank you for your comment. I understood your concern and how about the changes as below?
The EHT Compressed Beamforming Report information contains the channel matrix elements indexed, first, by matrix angles in order
shown in Table 9-71 (Order of angles in the compressed beamforming feedback matrix when used in a non-S1G band), and second, by data and pilot subcarrier index
from lowest frequency to highest frequency shown in Table 9-127b, Table 9-127c,
and Table 9-127d.
Best regards,
Jinyoung
Hi Jinyoung,
Sorry for the slow response…regarding the proposed change for CID below, the removed text of “first…second…” contains the information of how the feedback
information is organized and shouldn’t be removed IMO. Note that the ordering information are also present for HE,VHT,etc.
Can you please just address the frequency index issue from the commenter and keep the original text? Thanks.
CID
|
Clause
|
PP.LL
|
Comment
|
Proposed Change
|
Resolution
|
11628
|
9.4.1.71
|
185.62
|
Clarification of lowest and highest frequency for the MRU case should be added
|
Change text to "from the lowest frequency to the highest frequency (in case of MRU the lowest frequency stands for the lowest frequency of first RU and the highest frequency
stands for the highest frequency of the last RU)"
|
Revised
There’s no definition of channel matrix element in not only 11be but also 11REVme. And subcarrier indices are described below in the same subclause.
So it’s better to remove the description of ‘channel matrix element’ and ‘subcarrier index’ here to clarify.
Instructions to the editor:
Please make the changes as shown in doc 11-22/1131r0, below CID 11628.
|
Hi Alfred,
Please add the two CRs in Joint CC.
-
11-22-1131-00-00be-lb266-cr-for-9.4.1.71
-
11-22-1194-00-00be-lb266-cr-for-9.4.1.70
Best regards,
Jinyoung
Hi Alfred,
Would you please add
https://mentor.ieee.org/802.11/dcn/22/11-22-1205-00-00be-indicating-to-operate-in-eml-mode-via-ps-poll-or-qos-null.docx (1 CID) to MAC queue?
Thanks!
BR,
Xiangxin Gu
Communication Standards Devision
From: Minyoung Park <mpark.ieee@xxxxxxxxx>
Sent: Wednesday, July 27, 2022 8:29 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission
Hi Alfred,
Please add 11-22/1204r0 (20 CIDs) to the MAC queue.
Hi Alfred,
Please 11-22/1054r0 (46 CIDs) to the MAC queue.
Best,
Po-Kai
Hi Alfred,
Please add 11-22/1174r0 (7 CIDs) to the MAC queue.
Best,
Po-Kai
Hi Alfred,
Please add 11-22/1181r0 to the MAC queue (will be ready to review on 1st week of August). The CR doc resolves 31 comments.
Hi Alfred,
Could you help add 22/1177r0 (CR on 35.2.2, 15 CIDs) to the join queue? I’ll upload the document soon.
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.
Hi Alfred,
Could you please help to add CR document 22/1165r0 resolving comments related to Annex-B to the Joint queue? The
document can be found at:
https://mentor.ieee.org/802.11/dcn/22/11-22-1165-00-00be-lb266-cr-document-resolving-comments-related-to-annex-b.docx
Thanks.
Best Regards,
Rajat.
Hi Alfred,
Could you please add the following CR to the joint queue? Thanks.
13-Jul-2022 ET
|
2022
|
1120
|
0
|
TGbe
|
LB266 CR for CIDs of 4.3.16a
|
Yanyi Ding (Panasonic)
|
19-Jul-2022 22:10:34 ET
|
Download
|
Best regards,
Yanyi
Hi Alfred and all,
Could you help add the following CR to the joint queue?
1124
|
1
|
TGbe
|
LB266 CR for 9.3.1.22 MISC
|
|
|
Download
|
I’ve revised the resolution based on inputs from Greg, Dibakar, Liwen and Ross. Based on Srini’s inputs, I’ve also added some discussion text
on the context.
Thanks
Yanjun
Hi, Alfred
Could you add the following document to the PHY queue?
20-Jul-2022 ET
|
2022
|
1169
|
0
|
TGbe
|
LB266-CR-on-CID 12138-12139-12140
|
Yapu Li (OPPO)
|
20-Jul-2022 04:28:05 ET
|
Download
|
Thanks
Yapu
Hi Alfred, Siguard, Tianyu,
Can you add the following documents to the PHY queue?
18-Jul-2022 ET
|
2022
|
1163
|
0
|
TGbe
|
11be lb266 CR for clause 36.3.14 Packet Extension
|
Yan Zhang (NXP)
|
18-Jul-2022 ET
|
2022
|
1164
|
0
|
TGbe
|
11be lb266 CR for Clause 36.3.11 Mathematical description of signals
|
Yan Zhang (NXP)
|
Thanks
Yan
Caution:
EXT Email
Hi Alfred,
Could you add the following documents to the PHY queue?
11-Jul-2022 ET
|
2022
|
1063
|
0
|
TGbe
|
LB266 CR for 36.3.16 Transmit Requirements
|
Mengshi Hu (Huawei)
|
12-Jul-2022 08:37:40 ET
|
Download, Revise
|
11-Jul-2022 ET
|
2022
|
1064
|
0
|
TGbe
|
LB266 CR for 9.4.2.313.5 EHT PPE Thresholds Field
|
Mengshi Hu (Huawei)
|
12-Jul-2022 08:38:18 ET
|
Download, Revise
|
11-Jul-2022 ET
|
2022
|
1076
|
0
|
TGbe
|
LB266 CR for 36.2.2 RU_ALLOCATION
|
Mengshi Hu (Huawei)
|
12-Jul-2022 08:38:44 ET
|
Download, Revise
|
Best regards,
Mengshi Hu
Hi Alfred,
Can you add the following document to the PHY queue?
11-Jul-2022 ET
|
2022
|
1080
|
0
|
TGbe
|
LB266 CR on EHT PHY Introduction-1
|
Kanke Wu (Qualcomm)
|
12-Jul-2022 00:44:59 ET
|
Download
|
Thanks,
Kanke
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.
Hello all,
PHY ad-hoc has finished processing the CR queue and hence Monday PHY PM2 session is cancelled.
Please let us know if you have any submissions to be added to the PHY queue.
Alfred
--
Qualcomm Technologies Inc.
Office #: +1 858 658 5302
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
本电子邮件及其附件含有OPPO公司的保密信息,仅限于邮件指明的收件人使用(包含个人及群组)。禁止任何人在未经授权的情况下以任何形式使用。如果您错收了本邮件,请立即以电子邮件通知发件人并删除本邮件及其附件。
This e-mail and its attachments contain confidential information from OPPO, which is intended only for the person or entity whose address is listed
above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please
notify the sender by phone or email immediately and delete it!
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
|