Re: [STDS-802-11-TGBF] Motion request

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hi Julia,

Added.

But since your requested Motion text (first sentence) is not correct. I revised it as below, please help to double checkJ

Best Regards : )

Tony Xiao Han

发件人: Julia Feng [mailto:feng.julia.shuling@xxxxxxxxx]
发送时间: 2022年11月16日 6:28
收件人: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx; Hanxiao (Tony, WT Lab) <tony.hanxiao@xxxxxxxxxx>
主题: [STDS-802-11-TGBF] Motion request

Hi, Tony,

Could you please add the following to the motion list?

Do you agree to add fields RX_OP_Gain_Type and Rx_OP_Gain_Index along with CSI in 11bf sub-7GHz sensing measurement report to indicate the Rx OP index or Rx gain index?

? RX_OP_Gain_Type: 2 bits (b1b0)

・ 00: neither Rx OP index nor Rx gain index is reported, and Rx_OP_Gain_Index values are invalid

・ 01: Rx OP index is reported in Rx_OP_Gain_Index. The details of receiver OP categorization method(s) are TBD

・ 10: Rx gain index is reported in Rx_OP_Gain_Index. The details of Rx gain index definition are TBD

・ 11: reserved

・ Note: Receiver determines value of Rx_OP_Gain_Type as it sees the best fit. Rx_OP_Gain_Type value doesn’t change during a sensing measurement setup. No need of capability info to use this field. No need of initiator assigning the use of this field.

? Rx_OP_Gain_Index:

・ It’s a fixed size field, number of bits TBD.

・ Its content depends on the value of RX_OP_Gain_Type

・ Reporting value per receive antenna is TBD

SP results: unanimously supported