Hi Guogang,
Thanks for your comments. I incorporated your first comment into the PDT.
Re your comment about DS mapping, I added this note in the PDT at the end of section 37.9.5.2 (Target links preparation).
“NOTE – The DS mapping update operation is not performed during the ST preparation
procedure.” Would that work?
Re your comment about the “may” requirement for the 1st occurrence of the DS mapping change (during execution), this is the earliest point the
DS mapping can be initiated and the 2nd occurrence of the DS mapping change (during execution) has a “shall” requirement saying if it was not done earlier (at 1st occurrence), the AP shall do it now.
Thanks,
Duncan
From: huangguogang <huangguogang1@xxxxxxxxxx>
Sent: Monday, May 12, 2025 1:16 AM
To: Duncan Ho <dho@xxxxxxxxxxxxxxxx>; STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: 回复: [STDS-802-11-TGBN] MAC PDT Seamless roaming Part 1 and Part 2
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.
Hi Duncan,
Thanks. Please find my comments attached and take them into consideration.
Regards
Guogang Huang
发件人: Duncan Ho <00002b3e54cff3e2-dmarc-request@xxxxxxxxxxxxxxxxx>
发送时间: 2025年5月12日 12:06
收件人:
STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBN] MAC PDT Seamless roaming Part 1 and Part 2
Hi Alfred,
For the seamless roaming PDTs scheduled for Monday PM1, could I present Part 1 (25/566r7
– 97 CIDs) followed by Part 2 (25/736r2
– 22 CIDs) instead?
Part 1 was presented before so it’s just a delta update. Part 3 is not ready and will need to be deferred.
Thanks,
Duncan
To unsubscribe from the STDS-802-11-TGBN list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1