Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBN] MAC PDT generic enablement

Hi Yuxin, 

Thank you for your question.

This aspect is clarified in 37.27. Please see the relevant text below. 

(#721) An AP MLD that receives an OMP request to enable, disable, or update the parameters of UHR mode(s) for the associated non-AP MLD or affiliated non-AP STA(s) of an associated non-AP MLD shall have its affiliated AP(s) start serving the non-AP STA(s) with the mode(s) as indicated in the OMP request on the corresponding link(s) with the indicated parameters (if applicable) immediately after receiving an acknowledgement to the OMP response transmitted by the associated AP MLD or at the expiration of the transition timeout, whichever comes first.

As you can see in the highlighted, if the AP does not send OMP response, then the mode takes effect at the expiration of the transition timeout. 

Thanks,
Gaurang

From: yuxin.lu <eeluyx@xxxxxxxxx>
Sent: Thursday, July 24, 2025 1:44 AM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx>
Subject: Re: [STDS-802-11-TGBN] MAC PDT generic enablement

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Hi Gaurang,

I was wondering why eMLSR is included in the OMP Request. Does it mean that if AP does not reply with the OMP Response, the non-AP MLD cannot enable, disable, or update parameters for eMLSR? I think it changes the enable/disablement behavior from 11be

Could you clarify? Thanks

On Thu, 24 Jul 2025 at 05:26, Gaurang Naik <0000305a2f8ce933-dmarc-request@xxxxxxxxxxxxxxxxx> wrote:
Hi Yongho,

Thank you for the catch. 

I can update the statement to say "A UHR non-AP MLD shall not transmit an EML Operating Mode Notification frame to enable, disable or update the parameters of the EMLSR mode."

Will capture this in my next revision.

Thanks,
Gaurang

From: Yongho Seok <yongho.seok@xxxxxxxxx>
Sent: Wednesday, July 23, 2025 5:09 PM
To: Gaurang Naik <gnaik@xxxxxxxxxxxxxxxx>
Cc: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx>
Subject: Re: [STDS-802-11-TGBN] MAC PDT generic enablement

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Hi Gaurang, 

In 802.11be, the EML OMN frame is used for EMLSR and EMLMR. 

A UHR 
non-AP MLD shall not transmit an EML Operating Mode Notification frame
. 

Based on this sentence of your PDT, the EMLMR mode can't be used by UHR STA because there is no UHR signaling for EMLMR.
Or, you can add similar signaling for EMLMR mode in your enablement framework. 
Could you clarify what your intention is? 

Thanks, 
Yongho 

2025년 7월 23일 (수) 오전 7:57, Gaurang Naik <0000305a2f8ce933-dmarc-request@xxxxxxxxxxxxxxxxx>님이 작성:
Hello all, 

Could you please use this thread to provide your feedback/comments on document 882r9?

Thanks,
Gaurang

From: Gaurang Naik <gnaik@xxxxxxxxxxxxxxxx>
Sent: Wednesday, July 23, 2025 3:43 AM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx <stds-802-11-tgbn@xxxxxxxxxxxxxxxxx>
Subject: Re: MAC PDT generic enablement

Hello all,

11-25/882r8 is now on mentor.

Thanks,
Gaurang

From: Gaurang Naik <gnaik@xxxxxxxxxxxxxxxx>
Sent: Tuesday, July 22, 2025 10:29 PM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx <stds-802-11-tgbn@xxxxxxxxxxxxxxxxx>
Subject: Re: MAC PDT generic enablement

Hello all,

11-25/882r7 is now on mentor.

Thanks,
Gaurang


From: Gaurang Naik <gnaik@xxxxxxxxxxxxxxxx>
Sent: Tuesday, July 22, 2025 2:34 PM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx <stds-802-11-tgbn@xxxxxxxxxxxxxxxxx>
Subject: Re: MAC PDT generic enablement

Hello all, 

Uploaded 11-25/882r6 based on received offline feedback. 

Thanks,
Gaurang

From: Gaurang Naik <gnaik@xxxxxxxxxxxxxxxx>
Sent: Monday, July 21, 2025 3:24 PM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx <stds-802-11-tgbn@xxxxxxxxxxxxxxxxx>
Subject: Re: MAC PDT generic enablement

Hello all, 

I have uploaded a rev5 of the document 882. This addresses feedback that I received during the teleconference and over email. It also now resolves the following CIDs:
  • 2478, 2480, 2471, 2648, 2651, 2711, 2712, 3650, 3678, 3952, 721, 2121, 2122, 2123, 252, 2491, 2492, 2591, 2592, 3716, 3764, 1278, 1279, 1280, 1281, 1282

Please let me know if you have any feedback or suggestions.

Thanks,
Gaurang

From: Gaurang Naik <gnaik@xxxxxxxxxxxxxxxx>
Sent: Monday, May 12, 2025 4:14 AM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx>
Subject: MAC PDT generic enablement

Hi Alfred, 

Could you please queue 11-25/882, PDT on generic enablement, to the MAC queue? It resolves ~30 TBDs in D0.2.

All, please review and let me know if you have any feedback.

Thanks,
Gaurang

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1



--
Best Regards,
Yuxin

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1