Could you please queue following two SPs on Flexible MBSSID set for tomorrow's MAC agenda:
SP1:
Do you support the following for a multiple BSSID Set in UHR?
- A multiple BSSID set in UHR can consist of a UHR BSSID as the transmitted BSSID and one or more non-UHR EHT BSSID as a nontransmitted BSSID. For a non-UHR EHT nontransmitted BSSID, the UHR Operation element, the UHR Capabilities element and/or other UHR defined elements that are carried for the UHR transmitted BSSID, are listed in the Non-Inheritance element in the corresponding nontransmitted BSSID profile.
SP2:
Do you support the following for UHR defined operating modes for a multiple BSSID set in UHR?
- The support for each UHR defined operating mode will be the same across all BSSIDs in a multiple BSSID set and shall be signaled in the UHR Capabilities element.
- The UHR Capabilities element shall not be included within a nontransmitted BSSID profile (i.e. it is always inherited).
- The following UHR defined operating modes shall have the same enablement status across all BSSIDs in a multiple BSSID set: AP PUO, DBE, DPS (for mobile AP).
- The following UHR defined operating modes can be independently enabled by a UHR AP in a multiple BSSID set: NPCA, DSO, P-EDCA, LLI.
- The enablement status for UHR operating modes is carried in the UHR Operation element in Beacon, Probe Response and (Re)Association Response.
- For a nontransmitted UHR BSSID, if the enablement status is different for one or more UHR operating modes than the transmitted BSSID, then the corresponding nontransmitted BSSID profile carries a UHR Operation element with the enablement status of UHR operating modes for that nontransmitted BSSID.
- For a nontransmitted UHR BSSID, if the enablement status is same for all UHR operating modes as the transmitted BSSID, then the UHR Operation element is inherited for that nontransmitted BSSID.
- The following UHR defined operating modes shall have the same parameters across all BSSIDs in a multiple BSSID set: NPCA, DSO, AP PUO, DBE
- The following UHR defined operating modes can have per-BSS specific parameters in a multiple BSSID set: P-EDCA, DUO.
- Parameters for UHR defined operating modes are carried in a UHR Operating Modes element in Probe Response and (Re)Association Response frames.
- For a nontransmitted UHR BSSID, if the parameters are different for one or more UHR operating modes than the transmitted BSSID, then the corresponding nontransmitted BSSID profile carries a UHR Operating Modes element with the BSS specific parameters for that nontransmitted BSSID.
- For a nontransmitted UHR BSSID, if the parameters are same for all UHR operating modes as the transmitted BSSID, then the UHR Operating Modes element is inherited for that nontransmitted BSSID.
- For DBE, DBE bandwidth (3 bits) is carried in the UHR Operation element.
Thanks,
Binita