Re: [STDS-802-11-TGBN] 11-25/669 ---- CC50 MAC CIDs for DPS

[Kiseon Ryu <kiseon.ryu@xxxxxxxxxxxxxx>]

Hi Liwen,

Thank you for sharing the updated version of the document. I want to clarify the LC mode parameters used for SU PPDUs, MU PPDUs and TB PPDUs. For SU PPDU, constraints are placed on the PPDU itself, while for MU PPDU and TB PPDU, constraints are placed on the allocated RUs.

Please modify the following text on page 28 

From:

If the Remain In LC Mode field of the MU-RTS Trigger frame is equal to 1, then the DPS assisting AP:

• shall ensure that the frame exchange(s) that is initiated by the transmission of this frame is using parameters that are compliant with the non-AP STA’s LC mode capabilities.

To:

 If the Remain In LC Mode field of the MU-RTS Trigger frame is equal to 1, then the DPS assisting AP:

• shall ensure that all SU PPDUs transmitted to the DPS non-AP STA and RUs allocated to the DPS non-AP STA within MU PPDUs and TB PPDUs, that is initiated by the transmission of this frame, do not exceed the values of the LC mode bandwidth, the LC mode Nss, the LC mode MCS in the DPS operation parameters of the DPS non-AP STA

Thank you,

Kiseon

From: Liwen Chu <liwen.chu@xxxxxxx>
Date: Wednesday, July 30, 2025 at 10:42 PM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx>
Subject: Re: [STDS-802-11-TGBN] 11-25/669 ---- CC50 MAC CIDs for DPS

Hi all,

 

I made the following major changes per today’s SP and the offline discussions:

1, removing option 1 and option 2 in subclause 37.9.1.2 (DPS operation for mobile APs)

2, adding optional MU-RTS with Remain In LC Mode field as ICF where the DPS STA doesn’t need to transmit to the HC mode if the  Remain In LC Mode field in MU-RTS is equal to 1.

3, adding optional feature that a DPS mobile AP can stay in HC mode until the next TBTT.

 

Best Regards,

Liwen

 

From: Liwen Chu
Sent: Tuesday, July 29, 2025 10:54 AM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBN] 11-25/669 ---- CC50 MAC CIDs for DPS

 

Hi all,

 

I made the following changes per the comments received in ad hoc meeting:

1, adding Default Mode field in DPS Operation Parameters field.

2, adding resolution of CID 2131.

3, ICF selection rules with/without DUO under DPS.

 

If you have comments, please let me know.

 

Best  Regards,

Liwen

---

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

---

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1