| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hi Jay, Thanks for the comment. Good point. I’ll add some text similar to the clean-up text below in the preparation phase 37.16.5.2 but apply to the current AP MLD instead. ”If an ST execution request from the non-AP MLD requesting SMD BSS transition to a target AP MLD is not received by the current AP MLD or the target AP MLD within t • The setup links at the target AP MLD. • The transferred context at the target AP MLD. • The newly derived PTK if the Per-AP MLD PTK mode is used.” BR, Duncan From: yang.zhijie@xxxxxxxxxx <yang.zhijie@xxxxxxxxxx>
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros. Hi Duncan, Thanks for your efforts on this. Regarding the following proposed text. I think we need some texts to clarify whether the context in the current AP MLD is removed or not, what's your opinion? (#10413)When the current AP MLD receives a notification from
the current AP MLD via the backhaul indicating that the
non-AP MLD has transitioned to the target AP MLD , the
current AP MLD shall remove all setup
links with the non-AP MLD and enter State
1 with the non-AP MLD . Thanks Best Regards Jay Yang (杨志杰)
Original From: DuncanHo <00002b3e54cff3e2-dmarc-request@xxxxxxxxxxxxxxxxx> Date: 2026年01月12日
00:30 Subject: [STDS-802-11-TGBN] CR for seamless roaming UL suspension and state changes Dear Seamless Roaming TTT members, I’ve drafted this CR to address the UL data suspension and MLD state change. Could you please review it and let me know if you have any feedback? Hope to see you in Victoria! BR, Duncan To unsubscribe from the STDS-802-11-TGBN list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1 To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1 |