Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBN] Co-BF/Co-SR Trigger frame format discussion

Thanks Alice for the confirmation.

 

Hi all, I’ve uploaded a new revision which fix the issues mentioned by Ron.

https://mentor.ieee.org/802.11/dcn/26/11-26-0023-04-00bn-lb291-cr-for-co-bf-and-co-sr-trigger-frame-format.docx

 

Best,

Jason

 

发件人: Alice Jialing Li Chen <jialing.li.phd2@xxxxxxxxx>
发送时间: 2026年1月16日 5:22
收件人: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBN] Co-BF/Co-SR Trigger frame format discussion

 

Confirm that in CoSR, the number of UHR-SIG symbols is fixed to 1. No signaling is needed.

 

Regards,

Alice

 

 

On Thu, Jan 15, 2026 at 12:34 PM Ron Porat <000009a0da80e877-dmarc-request@xxxxxxxxxxxxxxxxx> wrote:

Hi Jason,

 

Please also review these two comments on your doc:

 

 

>> When the MAPC Trigger Type field is equal to 2, the Number Of UHR-LTF Symbols field indicates the number of UHR-LTF symbols of the PPDU transmitted by the Co-SR coordinating AP in the Co-SR transmission, and is equal to the value of the field plus 1.

Comment 1:

- This should also apply to any EHT MU PPDU transmitted with CoSR mode 1 (for preamble alignment as indicated above).

 

>> When the MAPC Trigger Type field is equal to 3, the Number Of UHR-SIG Symbols field indicates the number of UHR-SIG symbols of the PPDU of the Co-SR transmission, and is equal to the value of the field plus 1. When the MAPC Trigger Type field is equal to 2, the Number Of UHR-SIG Symbols field indicates the number of UHR-SIG symbols of the PPDU transmitted by the Co-SR coordinating AP in the Co-SR transmission, and is equal to the value of the field plus 1.

Comment 2:

- Actually, the number of UHR-SIG symbols does not need to be signaled at all in the trigger frame. It is defined to be 1 (with UHR-SIG/EHT-SIG MCS fixed to be 0) as I recall

 

Thanks,

Ron

 

 


From: Guoyuchen (Jason Yuchen Guo) <000018696e95f088-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Thursday, January 15, 2026 9:55 AM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBN] Co-BF/Co-SR Trigger frame format discussion

 

Dear TGbn members,

 

I have uploaded a revision of doc. 0023 based on the feedback from members.

 

Best,

Jason

 

 

发件人: Guoyuchen (Jason Yuchen Guo)
发送时间: 2026年1月15日 9:16
收件人: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
主题: Co-BF/Co-SR Trigger frame format discussion

 

Dear TGbn members,

 

Please let me know your feedback on doc. 11-26/0023r1 on Co-BF/Co-SR Trigger frame format, thank you!

 

Best,

Jason

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1