| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hi All, We discussed resolution for CID 6106 during the TGbn MAC call on 29th. The resolution was deferred for further discussions. Since then, I’ve been receiving offline feedback on that topic, and I
have revised the resolution based on the inputs received so far. In addition, I have included CID 12437 in my doc as it is related to the same issue. Here’s the revised text for the NOTE: NOTE - During the DL draining period, a non-AP MLD can use power save mode on its setup link(s) with the target AP MLD to manage its frame exchanges with the current AP MLD and the
target AP MLD. The following additional considerations apply depending on the capabilities of the non-AP MLD:
-
A multi-radio non-AP MLD can simultaneously receive DL data frames from the current AP MLD on one link and exchange frames with the target AP MLD on another link.
-
A non-AP MLD operating in EMLSR mode with the current AP MLD can manage DL reception from the current AP MLD by choosing not to respond to an ICF sent by the current AP MLD.
-
A single-radio non-AP MLD that does not support EMLSR must complete or terminate early the DL draining period with the current AP MLD before initiating frame exchanges with the target AP MLD. Could you please review the updated text and let me know if you have any additional feedback?
To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1 |