Hi Binita,
Could you please check my observations?:
l
p.12, the last para for CID #5760, “… if RCPI information is available for hto provide RCPI information for those requested APs.” ??? “… if RCPI information is available
for those requested APs.”?
l
p.15, before Figre9-aaX, “… is defined Figure9-aaX …”
à “… is defined in Figure9-aaX …”
l
p.16, the 3rd item at the top, “… in 37.1.5.6 (ST preparation procedure).”
à “… in 37.15.6 (ST preparation procedure).”
l
p.23, in the NOTE, what happens if the non-AP MLD doesn’t update its STR/NSTR link status? Just leave it as is will cause a problem. The non-AP MLD needs to adjust
the operating bandwidth to keep the same status, doesn’t it?
Best regards,
tomo
From: Binita Gupta <bingupta.ieee@xxxxxxxxx>
Sent: Friday, July 10, 2026 2:42 PM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBN] 11-26/1186 - Revised number of CIDs
Hi All,
I have uploaded a revised 11-26/1186r1 that includes following set of CIDs:
Misc. MAC CIDs:
12525, 12526, 12541, 12625
Roaming CIDs:
4707, 5606, 5760, 12132, 12133, 12134, 12366, 11345, 12359
Enhanced CU CIDs:
12601, 12622, 10669
DBE+NSTR CID: 8061
L4S CIDs:
11845, 12677, 12678, 12679
Your review and feedback are appreciated!
Hi Alfred,
I have merged CIDs from multiple CR docs into 11-26/1186r0 with 17 CIDs now.
I will be adding 4 more L4S CIDs to this CRD.
Could you please revise this document in the queue as follows:
- 11-26/1186r0 (21 CIDs)
Please review and provide any feedback you may have.
To unsubscribe from the STDS-802-11-TGBN list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
|