Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBN] TGbn MAC AM2: document 26/1729r3 uploaded

Ack. Motion will look like this (all, let me know if any issues with this post-SP amendment).

Move to approve resolutions to the CIDs (18C):

•16019 16020 16022 17256 17259 17263 19761 19764 19768 20011 20012 20013 20014 20015 20016 20382 20961 20966 17999 in 11-26/1729r4* [18 CIDs]

and incorporate the text changes into the latest TGbn draft.

Move:   Second:

Discussion:

Result:

Note: These are CRDs that obtained ≥ 75% support during the straw poll phase of the MAC ad-hoc of Monday AM2 of September 14, 2026.

* Added 1799 as per author’s request and e-mail to reflector. No changes to the proposed changes from r3 to r4


On Mon, Sep 14, 2026 at 7:17 PM Giovanni Chisci <00002b657bbbbed7-dmarc-request@xxxxxxxxxxxxxxxxx> wrote:
Thanks Tomy for pointing this out.

I created a fourth revision, in which the only change is adding CID 17999 to the CID resolution table. Same resolution as 20012, no text changes.
https://mentor.ieee.org/802.11/dcn/26/11-26-1729-04-00bn-lb296-errata-for-ba-operation-during-st.docx

@Alfred Asterjadhi could you please populate the motion with 26/1729r4 (instead of r3) as reference CR document, and add to the motion the resolution of CID # 17999?

Thanks,
Giovanni


From: 杨航 Tomy <yanghang1@xxxxxxxxxxxxx>
Sent: Monday, September 14, 2026 16:48
To: Giovanni Chisci <gchisci@xxxxxxxxxxxxxxxx>; STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx>
Subject: Re: [STDS-802-11-TGBN] TGbn MAC AM2: document 26/1729r3 uploaded

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Hi Giovanni,

Thank you for your work. 
Could you please add CID #17999 to Group 1 in 26/1729, together with CID #20012? CID #17999 is basically aligned with the modification in the document. 
CID
Commenter
Must Be Satisfied
Clause Number(C)
Page(C)
Line(C)
Category
Page
Comment
Proposed Change
17999
Hang Yang
No
9.6.43.4
246
21
T
246.21
The definition of Message Type 2 in Table 9-658bg combines the functions of different transmission directions in a single entry. This looks chaotic and is likely to cause confusion. For clarity, the meaning of Message Type 2 should be described separately depending on the transmitter.
Change meaning of Type=2 to "When transmitted by a non-AP MLD, it indicates an early termination of the DL draining period, or DL block ack information, or both;
 When transmitted by the current AP MLD, it indicates no more DL data, or an indication of DL data completion for the requested TIDs, in response to the non-AP MLD's request".
Thank you.

Best regards, 
Tomy Hang Yang
Ruijie Networks
Date: Tue, Sep 15, 2026, 07:31
Subject: [STDS-802-11-TGBN] TGbn MAC AM2: document 26/1729r3 uploaded
Dear all,

I uploaded the following doc on Mentor, passing SP with unanimous consent in AM2.

Best,
Giovanni

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1