| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hello all, The current guideline include. We can further discuss specific examples if you have further question. 3.4
Frame formats (Clause 9)
Clause 9 is reserved for describing structure (apart from statements in 9.1). Statements that describe the actions of a STA in order to determine a value for a field and any other behavioural specification should not be present in Clause 9. This requires a bit of interpretation. For example: “the Length field is set to the logarithm of the number of octets in the remainder of the frame” is acceptable. The act of calculating a logarithm is not considered
to be behaviour. But: “The Legacy Devices Present field is set to 1 when the STA receives a beacon that does not include an HT Operation element” is clearly a description of behaviour, and
therefore not acceptable. 2.3
“Is set to”
The verb “set” should only be used when describing how a field obtains a value, e.g. “The Measurement Duration field is set to the preferred or mandatory duration of the requested
measurement, expressed in units of TUs.” Where the value of the field is read or referenced, (e.g., in the context of a condition), “is set to” shall not be used. Note that when a field value is tested in order to construct another field value, “equal to” is used for the test, and “set to” for the constructed field. “If the <xyz> field
is equal to 0, the <abc> field shall be set to 1.” Regards Ross Jian Yu
于健 Huawei Technologies To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1 |