Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11-TGBP] 回复: [STDS-802-11-TGBP] SP Request

Hi Bo,

 

Can you please add the following MAC SPs to the queue?

 

SP1: Do you agree to capture the following text to TGbp SFD?

l  Two indication bits can be included in the trigger frame or SP advert frame for frequency shift from PM-94

n  1 bit to indicate whether or not frequency shift from PM-94 is applied;

n  1 bit to indicate positive or negative 5MHz frequency shift.

Ref: 11-26/1403r0

 

SP2: Do you agree to capture the following text to TGbp SFD?

l  The following additional features will be indicated as the AMP non-AP STA capabilities,

n  Optional Security Supported

n  Optional SP Supported

n  Optional Measurement Indication Supported

u  Which type of measurement (RSSI or charging rate) is supported

Ref: 11-26/1403r0

 

SP3: Do you agree to capture the following text to TGbp SFD?

l  Without knowing the AMP STA capabilities, AMP AP should assume as follows by default,

n  RF energy harvesting needed

n  Reporting of the transmission time the STA can sustain NOT supported

n  Optional Security NOT supported

n  Optional SP NOT supported

n  Optional Measurement Indication NOT supported

n  UL rate and security are TBD.

Ref: 11-26/1403r0

 

Best regards,

Yinan

发件人: Guy-Armand Kamendje <guy-armand@xxxxxxxx>
发送时间: 2026年7月14日 21:49
收件人: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBP] SP Request

 

Hello Bo,

Could you please add the following SP to the queue? 

 

SP1# Do you agree to add the following text to the 802.11bp SFD?
An AMP AP shall keep, and a non-AP AMP STA may keep an enumerated state variable for each STA with which direct communication is needed. This state variable expresses the relationship between the local STA and the remote STA. It takes on the following values:
State 1: Initial start state (Unbonded and Unauthenticated)
State 2: Bonded (pending LSB Authentication)
State 2a: Bonded (no possible Authentication)
State 3: Bonded and Authenticated
Note: This does not apply to mono static backscatter.
References 802.11-26/1348r1 802.11-26/1346r1, 802.11-26/1347r1

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1