Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBQ] Revision 7 of the agenda spreadsheet (25/1712) posted

Thanks Edward!
From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: Wednesday, November 12, 2025 8:18 PM
To: Shengquan Hu <shengquan.hu@xxxxxxxxxxxx>; Lin Yang <linyang@xxxxxxxxxxxxxxxx>
Cc: STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx>
Subject: Re: [STDS-802-11-TGBQ] Revision 7 of the agenda spreadsheet (25/1712) posted
 

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Dear Lin, Shengquan, and all,

Thanks for your review and spotting my unintentional mistake - the two instances of 1797 should be 1737.   Revision 1 of the motion deck that corrects these 2 mistakes will be updated soon.

Regards,
Edward

On Wed, Nov 12, 2025 at 7:33 PM Shengquan Hu <000036fc915e2c29-dmarc-request@xxxxxxxxxxxxxxxxx> wrote:

Hi Edward,

 

  I think it is typo for  DCN number of “11-25/1797r1” in motion 6 & 11, it should be “11-25/1737r1” which is Lin’s contribution.

 

Thanks,

Shengquan

 

From: Lin Yang <00002bbbd565f56a-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, November 12, 2025 5:07 PM
To: STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBQ] Revision 7 of the agenda spreadsheet (25/1712) posted

 

External email : Please do not click links or open attachments until you have verified the sender or the content.

Thanks Edward. 

 

In motion 6 and motion 11, the DCN number of 11-25/1737r1 is missing from the supporting DCN list. Can you add it into these two motions?

 

Thanks,

Lin

 

From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: Wednesday, November 12, 2025 9:52 AM
To: STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx>
Subject: [STDS-802-11-TGBQ] Revision 7 of the agenda spreadsheet (25/1712) posted

 

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Dear all,

 


Regards,

Edward

 

To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1

To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1

To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1

To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1