Hi Edward, Jonghoe,
I am fine with the change – i.e., calling it ‘IMMW non-AP STA’ and inclusion of doc 25/1443r2 as supporting doc.
Regards,
Abhi
From: Jonghoe Koo <jh89.koo@xxxxxxxxxxx>
Sent: Wednesday, November 12, 2025 9:34 PM
To: STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBQ] Please review: List of motions to be considered on Thursday PM1
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.
Hi Edward,
Thanks for the clarification and sharing the status.
I understand the situation well.
Thanks a lot for your effort!
Regards,
Jonghoe KOO
Communications Standards Research Team,
Samsung Research
Samsung Electronics
From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: Thursday, November 13, 2025 2:31 PM
To: STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBQ] Please review: List of motions to be considered on Thursday PM1
re: your comment on the terminology, it was assigned to me as an action item in the September 2025 wireless interim.
This topic was scheduled to discuss in our Editors' meeting this Tuesday but it was not covered because of running out of time. It is now rescheduled to discuss tentatively on the
January 5th 2026 teleconference call.
I will keep all of you posted!
Regards,
Hi Edward,
Could you please add
25/1443r2 in the list of supporting docs for Motion 1 (MAC) if possible?
If it is possible to leave comments on the motion text, I would like to share the following feedback with Abhi.
@Abhi,
Hi Abhi, as I sent an email to you, can we have an opportunity to shortly discuss which one is better between ‘non-AP IMMW STA’ and ‘IMMW non-AP STA’?
I would suggest to use ‘IMMW non-AP STA’ instead of ‘non-AP IMMW STA’ for consistency with 11be/bn utilizing the MLO, as we are using ‘EHT non-AP STA’ and ‘UHR non-AP STA’.
In that case, we can call an MLD in TGbq as having at least one affiliated IMMW non-AP STA and at least one affiliated EHT/UHR non-AP STA operating in the sub 7.25 GHz link.

Anyway, it’s just an tiny editorial thing, so it would be happy to include my previous contribution 24/1443r2 in the list of supporting docs for Motion 1.
Regards,
Jonghoe KOO
Communications Standards Research Team, Samsung Research
Samsung Electronics
Hi Edward,
Could you please add 25/1553r1 in supporting docs for Motion 8 (MAC).
Thanks,
Bilal
|
Caution: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
|
Thanks for your good catch and I am sorry for this.
Revision 2, which addresses your comment, will be posted prior to THU PM1.
Hi Edward,
In the supporting doc list for motion 6, 822r1 is missing. Could you please add it as one of the supporting docs.
Best regards,
Eunsung
Based on the requests I received so far, I prepared a slide deck that contains 11 motions we will consider on Thursday PM1:
Please review and check if there is any edit or correction required.
To unsubscribe from the STDS-802-11-TGBQ list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1
To unsubscribe from the STDS-802-11-TGBQ list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1
To unsubscribe from the STDS-802-11-TGBQ list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1
|

|
|
![]()
|
To unsubscribe from the STDS-802-11-TGBQ list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1
To unsubscribe from the STDS-802-11-TGBQ list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1
To unsubscribe from the STDS-802-11-TGBQ list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1
To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1
|