| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
+ TGbq reflector Hi Yajun, As I explained on the Webex chat, TGbe spec requires that an MLD have at least one link in enabled state. Even without the mmW link, the spec will
require at least one link on sub7 to be in enabled state. Please see 802.11be-2024 spec page 525 (35.3.7.2.1): “At any point in time, a TID shall always be mapped to at least one setup link both in DL and UL, which means that a TTLM
change is only valid and successful if it will not result in having any TID for which the link set for DL or UL is made of zero setup links.” Regards, Abhi
From:
程亚军 <chengyajun@xxxxxxxxxx>
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros. Hi, Abhishek As discussed for motion 12 just now. A more accurate statement would be “An MLD that has at least one affiliated mmWave STA
and at least one enabled mmWave link shall have at least one other affiliated STA that is operating on an enabled link located in the sub 7.25 GHz band.” If all the mmWave are disabled, it is not necessary for at least one 7GHz link to be enabled. Thanks, Yajun #/******本邮件及其附件含有小米公司的保密信息，仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本邮件！
This e-mail and its attachments contain confidential information from XIAOMI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial
disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!******/#
To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1 |