Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11-TGBQ] 回复: [External Mail][STDS-802-11-TGBQ] TGbq PHY PDT: Parameters for IMMW-MCSs

Hi Xin,

 

Thank you for your valuable comments. I have fully updated the text by removing all the subscripts "u" according to your suggestion, and the revised version (Rev 1) has been uploaded.

 

Best regards,
Yulin

 

 

发件人: 左鑫 <zuoxin@xxxxxxxxxx>
发送时间: 2026年9月11日 9:59
收件人: huangyulin (D) <huangyulin6@xxxxxxxxxx>; STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx
主题: RE: [External Mail][STDS-802-11-TGBQ] TGbq PHY PDT: Parameters for IMMW-MCSs

 

Hi Yulin,

 

Thank you for the drafting work.


Since 11bq is defined for ONLY SU data transmission, should we remove all the subscript “u” from all the equations, and corresponding descriptions ?

Please see other comments in the attached.

 

Take care,

Xin

 

From: huangyulin (D) <00005ed242991fff-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, September 9, 2026 12:04 PM
To: STDS-802-11-TGBQ@xxxxxxxxxxxxxxxxx
Subject: [External Mail][STDS-802-11-TGBQ] TGbq PHY PDT: Parameters for IMMW-MCSs

 

[外部邮件] 此邮件来源于小米公司外部，请谨慎处理。若对邮件安全性存疑，请将邮件转发给misec@xxxxxxxxxx进行反馈

Dear TTT members of the 'Parameters for IMMW-MCSs' section

 

Please find below the initial PDT for "Parameters for IMMW-MCSs". Your suggestions and comments are highly appreciated.

 

https://mentor.ieee.org/802.11/dcn/26/11-26-1697-00-00bq-pdt-phy-parameters-for-immw-mcss.docx

 

Best Regards,

Yulin Huang

 

To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1

To unsubscribe from the STDS-802-11-TGBQ list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBQ&A=1