[STDS-802-11] Full-duplex TIG: Call for submissions
--- This message came from the IEEE 802.11 Working Group Reflector ---
Dear 802.11 members
The 802.11 WG approved a motion to create at TIG to look at full-duplex
issues with respect to 802.11. The FD TIG will meet during the March
802.11 session.
This is a call for submissions for the FD TIG.
Potential topics are:
- Isolation requirements
- Current developments in full-duplex radios
- Changes that might be required to the 802.11 MAC to enable FD
- Adding collision detection
Please inform the Chair of the FD TIG (James Gilb Gilb_IEEE@xxxxxxxxx)
about your intended submission in order to allocate presentation time on
the agenda.
Thanks
James Gilb
_______________________________________________________________________________
If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.
Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.
If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.
Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________