|
Dear Mr. Humbert, Anna, and other
colleagues,
I have different understanding on the functionality of
measurements in the physcal layer.
Some measurements are performed at physical layer
and some another at MAC layer
and some the others at Layer 3.
Then they are reported to OA&M.
Of course, OA&M will manage and monitor all
measurements.
However, the purpose of it is operating, adminstering,
and managing of the systems.
Measurement results at physical layer is used for
radio resource management as well.
That is not the function of OA&M if I understand
correctly.
When a new service is requested, for instance, an
admission for the service is made by
a resource controller not by OA&M entity based on
physical measurement results.
This radio resource management purpose requests
different types, different periods, and
different forms of measurements from the OA&M
measurements.
That is why I still think measurement requirements is
necessary in PHY/RF section.
Best regards,
Jin
----- Original Message -----
Sent: Saturday, October 25, 2003 5:18
AM
Subject: RE: stds-80220-requirements: RE: A
new requirement item: measurement
From an
organizational perspective it seems like adding this proposal into the PHY/MAC
section duplicates the purpose behind the OA&M section.
John J.
Humbert
6220 Sprint Parkway
Mailstop KSOPHD0504 - 5D276
Overland Park, KS 66251-6118
PCS (816) 210-9611
-----Original
Message-----
From: Anna Tee
[mailto:a.tee@samsung.com]
Sent: Thursday, October 23, 2003 4:53
PM
To: Humbert, John J [NTWK
SVCS]
Cc: 'Jin-Weon
Chang'
Subject: RE:
stds-80220-requirements: RE: A new requirement item:
measurement
Hi
John,
In Jin’s
email, he has suggested to add a sub-section: “4.2.6
Measurements” under the clause
“4.2 PHY/RF”.
Regards,
Anna.
-----Original
Message-----
From:
owner-stds-80220-requirements@majordomo.ieee.org
[mailto:owner-stds-80220-requirements@majordomo.ieee.org] On Behalf Of Humbert, John J [NTWK
SVCS]
Sent: Thursday, October
23, 2003 9:34 AM
To: Jin-Weon
Chang; stds-80220-requirements@ieee.org
Subject: stds-80220-requirements: RE: A
new requirement item: measurement
Jin,
Is this
a new section or is it part of requirements OA&M support (section
4.5.4)?
John J.
Humbert
6220 Sprint Parkway
Mailstop KSOPHD0504 - 5D276
Overland Park, KS 66251-6118
PCS (816) 210-9611
-----Original
Message-----
From: Jin-Weon
Chang [mailto:jwchang1@samsung.com]
Sent: Thursday, October 23, 2003 3:02
AM
To: Humbert, John J [NTWK
SVCS]; stds-80220-requirements@ieee.org
Subject: A new requirement item:
measurement
Dear Mr. Humbert and
all,
I would like to submit a new
requirement item before the mentioned deadline.
I think we need to add this
requirement of measurement functionality
in the clause 4.2
PHY/RF.
Please find the following proposed
texts and rationale.
**************************************************************
-
Proposed texts:
4.2.6 Measurements
The system shall support the
functionality of measurements in the physical layer of
both the network and
the mobile terminal sides. The physical layer provides a set of
measurement
capabilities that include different types, for instance, such
as
intra-frequency, inter-frequencey, inter-system, quality measurements,
etc.
- Rationale: A requirement of
measurement functionality for the physical layer is
necessary to support
radio resource management, intra/inter-frequency/inter-system handoff,
etc.
|